Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD 0x00000124 Hardware issue

23 Aug 2015   #21
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

OK, depending on what CPU Cooler you have and where it is plugged in, BIOS showing the CPU fan as not spinning is not uncommon. Some of the fan headers and the fan wires are not able to read whether it is spinning.

Can you boot into BIOS?


My System SpecsSystem Spec
.
23 Aug 2015   #22
thrandall

Windows 7 Ultimate
 
 

It is the same hard drive, and OS.
My System SpecsSystem Spec
23 Aug 2015   #23
thrandall

Windows 7 Ultimate
 
 

I had checked the connection 3-4 times. Once I replaced the cpu fan, it now shows normal rpms. I will try your advice of the live Linux
My System SpecsSystem Spec
.

23 Aug 2015   #24
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

By chance could you put what power supply is in your system in your (My System Specs).
Some of the older ones had a voltage selector switch on the back that could be set wrong. Boy I'm I reaching for straws, but you and Steve have covered just about everything else.
My System SpecsSystem Spec
23 Aug 2015   #25
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

have you gone into bios and checked the sata controller and set optimized defaults like I suggested above? Do you know what your sata controller was set to before you made the switch?
My System SpecsSystem Spec
23 Aug 2015   #26
thrandall

Windows 7 Ultimate
 
 

Sorry, it's a new Thermaltake Smart 650watt power supply I bought new, about 4 months ago... 80 plus bronze.
My System SpecsSystem Spec
23 Aug 2015   #27
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Steve has a question in post #25 that needs answering.

Also please put you power supply in your system specs!!
My System SpecsSystem Spec
24 Aug 2015   #28
thrandall

Windows 7 Ultimate
 
 
MemTest86

I ran memtest 86+ all night and all day today, 13 passes, no errors on the memory. I'll try the windows repair disk again. I've go a new hard drive coming this week. i may have to do a fresh install with the new drive and copy my documents and settings manually.
My System SpecsSystem Spec
24 Aug 2015   #29
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Did you set bios to defaults? Have you checked your sata controller and do you know what it was before you made the switch?
My System SpecsSystem Spec
25 Aug 2015   #30
thrandall

Windows 7 Ultimate
 
 

Yes I set bios to defaults, SATA is set to IDE. As far as the SATA controller there are 4 on-board SATA connections I am using 1 and 2. I've tried 3 and 4 as well. Now concerning the standoffs there are 9 holes in the motherboard and 9 standoffs, all in the proper place screwed in with 9 m/b screws. the screws and standoffs came with the new case. I remember that bios was set to AI overclock at 10% with all of the parameters being set by the motherboard, is set that to standard.
My System SpecsSystem Spec
Reply

 BSOD 0x00000124 Hardware issue




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD STOP : 0x00000124 hardware problem
Can you help me with this problem?
BSOD Help and Support
BSOD Help - I believe it is a hardware issue
BCCode: 124 BCP1: 0000000000000000 BCP2: FFFFFA800B2924F8 BCP3: 0000000000000000 BCP4: 0000000000000000 OS Version: 6_1_7601 Service Pack: 1_0 Product: 768_1
BSOD Help and Support
BSOD BCCode: f4. Hardware issue?
I've been experiencing super intermittent BSODs, as in maybe one a week or less, but it occurred twice in 10 minutes today so here I am. I'm not usually doing anything in particular to incite it--in fact usually I'm away from the computer. Windows 7 Prof 64bit Other pc specs are in my profile....
BSOD Help and Support
Intermittent BSOD Issue 0x00000124
Hi. My mobo, cpu and ram were from overclockers.co.uk as an overclocked bundle I purchased a few years ago. I have been having an intermittent BSOD issues for the past few months. I had tried reinstalling windows and had reset the BIOS to default settings but the problem was still occuring....
BSOD Help and Support
BSOD 0x00000124 uncorrectable hardware error
Hello, I have a PC about a year old that unfortunately has had a series of problems. It's had a faulty power supply and recently a faulty hard drive. Had both of these faulty hardwares replaced and then recently it began blue screening again whilst playing Dragon Age. This started occurring...
BSOD Help and Support
BSOD - Hardware issue? Where do I begin?
Hi, long time reader, first time poster. I've been having some problems with BSODs during boot for a few months now. I re-installed Windows last week in hopes that it might solve the problem to no avail. Yesterday I downloaded and ran some of the tests in UBCD (Memtest86+, Mersenne Prime,...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:02.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App