Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_TLB

20 Aug 2015   #1
christop

Windows 7 Professional Service Pack 1
 
 
FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_TLB

*-Windows crashed with a blue screen four days ago, on this Clevo laptop from 2007. I can start up Windows, but it lasts only a few minutes before crashing again. It seems to run without problems in Safe Mode with Networking, though for some reason I can only establish a "Limited access" connection to the network.
I understand from the error code that this is likely to be a hardware issue. I have checked, and both fans are operational. The interior is free of dust. I have run chkdsk and scannow. I also tried reinstalling my old Vista hard drive, but this also crashed.


My System SpecsSystem Spec
.
21 Aug 2015   #2
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Hello and welcome Chris mate do you have enough time to run this https://www.piriform.com/speccy/download and let us know what the temps are fr the machine especially the CPU.
My System SpecsSystem Spec
21 Aug 2015   #3
christop

Windows 7 Professional Service Pack 1
 
 

Speccy failed to run unfortunately - with error message "CPU.dll init failed (error 2). I see other people have had this problem. I tried rebooting the machine, but still no joy. I have tried PC-Wizard - this also failed to run. I have just tried Open Hardware Monitor, which is giving me the HDD temperature (48C) but has only dashes for the two CPU cores.
I have also tried restarting the computer using msconfig's diagnostic startup, but this also goes straight to blue screen. All this started out of the blue on Monday.
My System SpecsSystem Spec
.

21 Aug 2015   #4
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

When you boot into Safe Mode, please see if you can follow these instructions:

CPU - Stress Test Using IntelBurnTest
My System SpecsSystem Spec
21 Aug 2015   #5
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Hmm am wondering if you can get the temp from the BIOS you should be able to get into that.

F2 on power up I think it is and the temp should be around 40- 50C or less on idle
My System SpecsSystem Spec
21 Aug 2015   #6
christop

Windows 7 Professional Service Pack 1
 
 

I just managed to do a normal boot, after letting the machine cool down, long enough to run CPU Thermometer (CPU Temperature Monitor). One core was running at 53C, the other at 55C at the point the blue screen took over. (No temperatures visible on the BIOS screens) Re the IntelBurn Test: I have tried looking for the maximum operating temperature of my CPU. I have found a T JUNCTION figure of 100C for my T7500. Is this the figure I am looking for?
My System SpecsSystem Spec
Reply

 FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_TLB




Thread Tools Search this Thread
Search this Thread:

Advanced Search



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:13.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App