Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Complete rebuild but still getting BSOD

17 Sep 2015   #11
Laith

Windows 10 Professional x64
 
 

Can you wipe your drive and re-install Windows.


My System SpecsSystem Spec
.
17 Sep 2015   #12
IWVC

Windows 7 pro 64bit
 
 

I really don't want to do that. I wiped and reinstalled several times on the previous hard disc, and the main reason for using a new disc was to ensure there were no hangovers from previous installations. I'd run several disc check programmes (including seatools) on the old one and memory checking tools run overnight for several passes. No faults were ever indicated.
Ian C
My System SpecsSystem Spec
17 Sep 2015   #13
Laith

Windows 10 Professional x64
 
 

Run Furmark, if the temps goes too high stop the test. Video Card - Stress Test with Furmark

Run MemTest86+, It must be MemTest86+. RAM - Test with Memtest86+

Run SeaTools(DO NOT RUN FOR SSDS) SeaTools for DOS and Windows - How to Use

Run Prime95, if the temps goes too high stop the test. Hardware - Stress Test With Prime95
My System SpecsSystem Spec
.

18 Sep 2015   #14
IWVC

Windows 7 pro 64bit
 
 

OK. Thanks will try but it may be a few days before I can get time to do it.
Regards
Ian C
My System SpecsSystem Spec
18 Sep 2015   #15
Laith

Windows 10 Professional x64
 
 

I'll wait.
My System SpecsSystem Spec
30 Dec 2015   #16
IWVC

Windows 7 pro 64bit
 
 

Sorry about the long wait, various things have happened that prevented me spending a decent session in front of this PC.


I ran FurMark for half an hour. The temp rose to 68C and then stabilised for the last 10 minutes with no problems.


Prime95 has been run for over two hours, with core temps staying at 42-43C. The graphics card (passively cooled 2GB nvidea GT 730) stayed at 30C, and the 3 hard discs between 23 and 28C. The only notable temperature was Temp 2 which quickly rose to 52/53C before stabilising for the rest of the duration of the tests. (possibly either northbridge or southbridge? I have no way of identifying which components are covered by Temps 1, 2 and 3 other than they are probably not CPU, GPU or HDs since these are separately identified)


Memtest 86+ was run for 16 hours giving 8 passes. For the spec of the PC this seemed to be a very long time for the 8 passes. It has 8GB (2x4GB) and both RAM chips were fitted. No problems reported. However one peculiarity I noticed was that the clock recording the duration of the test seemed to consistently miss a second every 4th or 5th second. It would tick over changing numbers at 1 second intervals and then every 4 or 5 seconds quickly flip from one number to the next in much less than the normal 1 second interval. Odd !


After Memtest I rebooted back to HD but the PC failed to start - getting past the light blue “Welcome” screen of Win7 but then hanging on a black screen and not loading up the desktop. To cut a long story short I removed 2 of the hard discs and eventually restarted on the remaining hard drive, The BIOS appeared to be correctly set up but until the old discs were removed it would not start. After restarting I decided to defrag the main disc and run CHKDSK just to be sure. CHKDSK took several hours to complete and although the disk is large (1TB) it did seem that the PC was running very slowly for some reason. However no faults were found.


Seatools didn't find any problems


It continues to BSOD and crash.Over 50 since I installed a fresh Win7 on a new disc and dumped all my old (favourite) programmes as potential trouble. I installed BlueScreenView to look at al the crash messages and trace any common driver or running programme but nothing seems consistent other than ntoskrnl.exe which seems to be the programme that is always running at the time of a crash. For info an excel spreadsheet of the last 50 crashes attached. The 4 pages should be seen as being all side by side to form a wide spreadsheet. I can only post pdf format not xls.


So any further advice welcome. I will carry on accepting (but not liking! ) crashes. I'd like to take advantage of the "free" win 10 offer but am reluctant while I have problems with the current set up.


Happy new year all
Ian C


Attached Files
File Type: pdf Blue screen data.pdf (47.1 KB, 2 views)
My System SpecsSystem Spec
30 Dec 2015   #17
Laith

Windows 10 Professional x64
 
 

Please post the new dumps. Also have you overclocked?
My System SpecsSystem Spec
30 Dec 2015   #18
IWVC

Windows 7 pro 64bit
 
 

OK I think this should be the one. No overclocking, all components bog standard.

Ian C


Attached Files
File Type: zip TYGLAS-30_12_2015_195452_38.zip (2.75 MB, 4 views)
My System SpecsSystem Spec
30 Dec 2015   #19
Laith

Windows 10 Professional x64
 
 

Are you sure your GPU isn't in the Turbo Boost slot, are you sure that your CPU doesn't have Turbo boost enabled?
My System SpecsSystem Spec
30 Dec 2015   #20
IWVC

Windows 7 pro 64bit
 
 

As far as I'm aware everything is "normal". I have not consciously enabled any "turbo boost" settings.
Ian C
My System SpecsSystem Spec
Reply

 Complete rebuild but still getting BSOD




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD even after rebuild (attachment)
Hello. Over the past few weeks, maybe more, my PC bluescreens and reboots. Dmp files indicated it had something to do with ATI (display driver). At points the screen would go all checkerboard and then crash. I tried everything from removing and reinstalling display drivers, trying a new...
BSOD Help and Support
SYSTEM_SERVICE_EXCEPTION BSOD after PC rebuild
Hey, I've recently rebuilt my PC and after booting to the desktop the next day, I got a SYSTEM_SERVICE_EXCEPTION BSOD. Its dump files are attached to this post. As I've had stability issues before, I thought this would be a good time to identify the cause as it's so soon after a rebuild. My...
BSOD Help and Support
Seemingly random BSOD after recent rebuild
Well after aprox 1 year of running perfect, my machine has started having the BSOD again. Last time the issue was the RAM (thankyou to those who helped me discover this), which were replaced without issue by the supplier. However, I have recently installed an Intel 330 120gb (sata3) SSD, and a...
BSOD Help and Support
lots of BSOD messages since system rebuild
hi, I'm hoping one of your clever people might be able to help with a number of different BSOD stop screens since reinstalling Windows 7 64bit pro. I've been getting a number of different messages appear (irq not less or equal, memory manager, error in non paged area), but i can't work out...
BSOD Help and Support
BSOD since machine rebuild
Just before xmas my machine suddenly started crashing... rebuilt from scratch but problems not resolved. Machine was built from barebones & consists of Foxconn H55M motherboard 4 core i5 intel cpu 4Gb RAM ATI 5770 card Win 7 Home Premium OEM SP1 All drivers are current
BSOD Help and Support
Multiple BSOD, even after system rebuild
I had a computer that was running stable with WXP. I upgraded to W7 x64, and started to have random BSOD. I ran all kinds of tests, and posted on this forum at some point. All pointed to a memory issue. I thus changed the hard drive, memory, motherboard and CPU. I kept the DVD drives, and the power...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:53.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App