Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Fresco Logic USB 3.0 driver FLxHCIc.sys

16 Sep 2015   #1
fdisilvestro

Windows 7 Home Premium 64bit
 
 
BSOD Fresco Logic USB 3.0 driver FLxHCIc.sys

Hi,

I recently installed an USB 3.0 Pci-e card in order to use an external HDD with USB 3.0

I get frequent BSOD that show the driver mentioned in the title as the culprit.

I need to keep the USB 3.0 option because of the speed (USB 2.0 is too slow)

Any help will be appreciated. Please find attached the ZIP file

Thanks


My System SpecsSystem Spec
.
20 Sep 2015   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

 Clean boot
Reduce items at start-up. No software except anti-virus is required plus doing this improves the time for logging into windows:Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:
  • Click on the
  • Type CMD on Search
  • Left click and Run as Administrator
  • Type SFC /scannow
Full tutorial here:Run Disk Check on your Hard Drive for file system errors and bad sectors on it.

 Hard Drive Diagnostics

  • Double click and open my computer.
  • Right click on desired drive and hit properties.
  • Click on tools tab and Check now.

Read complete instructions on the tutorial: Disk Check

Other Tests:
 

My System SpecsSystem Spec
22 Sep 2015   #3
fdisilvestro

Windows 7 Home Premium 64bit
 
 

Hi,

Thanks for your response.

I removed many startup programs,

The System File Checker completed with no errors
The drives were tested with their manufacturer's test tools and did not report any error
SeaTools did not report any error using the short tests. It could not test the G drive (not compatible)

I have attached the Crystal Disk Info screenshots for the boot drive (C) and the drive connected to the USB 3 port (G)

The BSOD happens occasionally, so I'll report if it happens again.

Regards
My System SpecsSystem Spec
.

Reply

 BSOD Fresco Logic USB 3.0 driver FLxHCIc.sys




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
USB 3.0 Fresco not working with Samsung HDD (Code 10)
I own a Samsung M3 Portable 1TB which works with every USB 2.0 hub but only with USB 3.0. The 3.0 hub is run by Fresco Logic Controller on an Asus motherboard. It is giving a Code 10. I downloaded the drivers from Asus' official website just for my PC's specific model. It is up to date according...
Hardware & Devices
Fresco Logic USB 3.0 Host Controller - Not working after pc restart
Hi, Recently got Fresco Logic USB 3.0 Host Controller (PCI Express Card), first tried and it was cool with ~60-80MB/s transfer rate. However, soon after I restarted the computer, the PCI card no longer works - cannot detect any usb device connected :cry:. Having said that, device manager does...
Hardware & Devices
Is there any logic to this order?
I've watched this a while and wonder if there is any order to how people appear in this list? Obviously you are always first, but I notice over the course of several hours that peoples position in the order shift around. So, what is the ordering based on? Golden
Chillout Room
Logic Gate Simulator?
Does anyone know of any good free logic gate simulation software? I find logic gates to be very interesting and useful.
Software
USB 3.0 to Be Demonstrated by ASUS and Fresco Logic
USB 3.0 has clearly been among the most discussed technological advancements of 2009 and, consequently, more than one company is planning on displaying the technology at the Consumer Electronics Show. VIA has already unveiled a single-chip USB 3.0 Hub Controller and Western Digital recently...
General Discussion
Logic with duplication of contacts
Ok, as best I can remember in windows, you maintained your windows contacts in part to be used in windows mail, correct? In XP, you maintained the address book for each user, in part at least, for outlook express. Ok, so why is there a created duplication now that once you import contacts to...
Browsers & Mail


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:21.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App