New
#61
Ok mate I live in Parkes NSW and I have no probs with IE the others I have tried in the past and well speed is all I want and in any case how fast can it go I just push a button it's there.
Now the PSU reading you have exactly what I wanted to look at and the volts as you can see are fine - just remember if those volts fall out of 5% of the required volts +or- then the machine will either not function properly if at all. Now if the PSU goes completely sideways then it will mean the self test circuit within it is picking up a fault and will not transmit that signal to pin 8 on the 24 pin socket and therefore no power up - it is a safety feature aimed at protecting the volts to components like the CPU for an example -I you read that link Tomshardware re 101 in my post will explain it.
In PART B: you can pick on any of the components and it will give you very detailed results ie frequencies, volts, memory timings etc etc see my pics for a couple of examples - the mobo one click on the sections within and a vast array of info available
It is a program I keep on each of my machines an it is invaluable and I belong to the forum which is also good
Now it is good that you can see so many hits with SAS as I do even though I run Kaspersky which I swear by MBAM does not pick up many and ADW I use when not sure of the other two especially if SAS comes up nil results as I find it nearly always does. As rough rue of thumb I run SAS on a weekly basis and if the machine is getting slow more often.
Mentioning slow just a by the by if you haven't used this before try some of the tweaks it will surprise you how much better the machine runs although you stand to lose the "bling" like transparency for example
Optimize Windows 7