Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.



Windows 7: BSoD when writing to FAT32 storage

12 Nov 2009   #1

WIN7
 
 
BSoD when writing to FAT32 storage

I recently upgraded my Dell Latitude XT from XP to Windows 7 (fresh install). Everything works pretty fine (although Dell did not bring out Win 7 drivers yet).

Nevertheless, I figured out that when writing/modifying files on a FAT32 storage medium (Internal/external Hard drive/USB stick) I get a BSoD. Sometimes I am able to view the files, sometimes the BSoD occurs immediately after connecting the FAT32 device.

The event viewer does not show many problems. The message related to the BsOD is:

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007f (0x00000008, 0x801de000, 0x00000000, 0x00000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 111209-29515-01.

The other message is (I think) related to a residual of the f-secure virus scanner that I previously installed

The following boot-start or system-start driver(s) failed to load:
FSES

I do not know whether this has any influence on the FAT32 issue.

Could someone help? Thanks in advance.

Martin

My System SpecsSystem Spec
.

12 Nov 2009   #2

7600.20510 x86
 
 

Hi.

Please see this link and follow along with what it says. We'll check on your .dmps and have a look.
My System SpecsSystem Spec
12 Nov 2009   #3

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Rooie Rinus View Post
I recently upgraded my Dell Latitude XT from XP to Windows 7 (fresh install). Everything works pretty fine (although Dell did not bring out Win 7 drivers yet).

Nevertheless, I figured out that when writing/modifying files on a FAT32 storage medium (Internal/external Hard drive/USB stick) I get a BSoD. Sometimes I am able to view the files, sometimes the BSoD occurs immediately after connecting the FAT32 device.

The event viewer does not show many problems. The message related to the BsOD is:

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007f (0x00000008, 0x801de000, 0x00000000, 0x00000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 111209-29515-01.

The other message is (I think) related to a residual of the f-secure virus scanner that I previously installed

The following boot-start or system-start driver(s) failed to load:
FSES

I do not know whether this has any influence on the FAT32 issue.

Could someone help? Thanks in advance.

Martin
Martin

Can you go into c:\windows\mindump, zip the dump file (*.dmp) and upload it to us for debugging

thanks

Ken J
My System SpecsSystem Spec
.


12 Nov 2009   #4

WIN7
 
 

Please find the minidump files attached to this reply.

Thank you very much for your assistance!

Cheers,
Martin
My System SpecsSystem Spec
13 Nov 2009   #5

7600.20510 x86
 
 

"0x00000008, or Double Fault, indicates that an exception occurs during a call to the handler for a prior exception. Typically, the two exceptions are handled serially. However, there are several exceptions that cannot be handled serially, and in this situation the processor signals a double fault. There are two common causes of a double fault:
  • A kernel stack overflow. This overflow occurs when a guard page is hit, and the kernel tries to push a trap frame. Because there is no stack left, a stack overflow results, causing the double fault. If you think this overview has occurred, use the !thread debugger extension to determine the stack limits, and then use the kb (Display Stack Backtrace) debugger command with a large parameter (for example, kb 100) to display the full stack.
  • A hardware problem."
The above describes one of the types of errors you're getting. The best thing to do I suppose, is to check the mohterboard manufacturer's site for any bios and chipset updates. Apply them and see how it goes.
My System SpecsSystem Spec
01 Dec 2009   #6

Windows 7
 
 

I have recently upgraded from Windows Vista to Windows 7. When HP sent me the update disc, it contained a bios update, which I applied. Also, I installed the most update Intel chipset driver. I am still receiving the BSOD when I try to write to FAT32 devices.

What should I do next?
My System SpecsSystem Spec
02 Dec 2009   #7

7600.20510 x86
 
 

Covert the FAT32 drive to NTFS. Problem resolved and better too.
My System SpecsSystem Spec
02 Dec 2009   #8
Microsoft MVP

 
 

pvoegele - Your next step should be to start your own topic. That way your issue will get the attention that it deserves - and you won't detract from Rooie Rinus' issue
My System SpecsSystem Spec
Reply

 BSoD when writing to FAT32 storage





Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:58 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33