Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD 0x009f driver_power_state_failure on sleep/resume

30 Sep 2015   #1
Simon1957

Windows 7 Ultimate x64
 
 
BSOD 0x009f driver_power_state_failure on sleep/resume

Hi Forum

I see this crops up from time to time and usually ends up being a driver issue.
So, can anyone help me to identify which driver is the culprit here?
Thanks in hopeful anticipation.

Simon


My System SpecsSystem Spec
.
30 Sep 2015   #2
axe0

Windows 10 Pro
 
 

Hi Simon1957,

Please remove items from the startup
How to remove items from startup - Windows 7 Help Forums
These programs could interfere with the boot process giving you trouble.

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.
  1. Uninstall Daemon Tools
  2. Download the SPTD standalone installer and follow these steps:
    • Double click the executable to open it
    • Click on the button shown below



If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window
My System SpecsSystem Spec
30 Sep 2015   #3
Simon1957

Windows 7 Ultimate x64
 
 

Thanks for the quick and helpful reply.
I've been using DT for years and never had a problem with it before.
I don't use SPTD and it isn't installed on my system.
Admittedly, this is a new computer, but most of the software I have was loaded on my old machine with no problems either.
I might try uninstalling DT for a while to test your theory while waiting to see if anyone can actually tell from the dumps which driver, if it is a driver, has actually caused the problem.
My System SpecsSystem Spec
.

30 Sep 2015   #4
axe0

Windows 10 Pro
 
 

There are a couple of causes.

The ASmedia USB 3.0 driver
The Windows Anti-Malware protection system driver
The Intel Ethernet Connection driver
The Malwarebytes Web Acces Control driver
The Nvidia Video driver


1.
Please check here for driver updates
Code:
*** WARNING: Unable to verify timestamp for asmthub3.sys
*** ERROR: Module load completed but symbols could not be loaded for asmthub3.sys

0: kd> lmvm asmthub3
start             end                 module name
fffff880`0948c000 fffff880`094b2000   asmthub3 T (no symbols)           
    Loaded symbol image file: asmthub3.sys
    Image path: \SystemRoot\system32\DRIVERS\asmthub3.sys
    Image name: asmthub3.sys
    Timestamp:        Thu Feb 12 07:57:05 2015 (54DC4EC1)
    CheckSum:         0002569A
    ImageSize:        00026000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

2.
Please do the following:
  • Open an admin command prompt
  • Copy/paste "sfc/scannow" (without quotes) and press enter
  • When it finished reboot your system
  • Open again an admin command prompt
  • Enter sfc/scannow again
If sfc/scannow does NOT say "Windows Resource Protection did not find any integrity violation", please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.


3.
Please check here for driver updates
Code:
*** WARNING: Unable to verify timestamp for e1d62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1d62x64.sys

0: kd> lmvm e1d62x64
start             end                 module name
fffff880`0496d000 fffff880`049eb000   e1d62x64   (deferred)             
    Image path: \SystemRoot\system32\DRIVERS\e1d62x64.sys
    Image name: e1d62x64.sys
    Timestamp:        Thu Jun 18 18:49:38 2015 (5582F6A2)
    CheckSum:         0007B97E
    ImageSize:        0007E000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

4.
Please uninstall Malwarebytes using the uninstall instructions
Code:
*** WARNING: Unable to verify timestamp for mwac.sys
*** ERROR: Module load completed but symbols could not be loaded for mwac.sys

0: kd> lmvm mwac
start             end                 module name
fffff880`129a9000 fffff880`129bb000   mwac       (deferred)             
    Image path: \??\C:\Windows\system32\drivers\mwac.sys
    Image name: mwac.sys
    Timestamp:        Wed Jun 18 04:06:34 2014 (53A0F42A)
    CheckSum:         00014607
    ImageSize:        00012000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4


5.
Please uninstall everything of Nvidia using Display Driver Uninstaller and install new drivers from here
Code:
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys

0: kd> lmvm nvlddmkm
start             end                 module name
fffff880`086ec000 fffff880`091cb000   nvlddmkm   (deferred)             
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp:        Sun Sep 13 23:06:55 2015 (55F5E56F)
    CheckSum:         00AA0D02
    ImageSize:        00ADF000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
My System SpecsSystem Spec
Reply

 BSOD 0x009f driver_power_state_failure on sleep/resume




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD when resume from sleep (+1 hour)
Hello, I have the problem with my new setup that it gives me a bluescreen when i wake it up from Sleep mode that's approximately +1 hour long sleep mode. When i set the pc to sleep and almost immediately wake it up by keyboard I get no bluescreen. I can't get it fixed. Mayby someone can get...
BSOD Help and Support
BSOD on resume from sleep
Hello, I'm having some problems whenever i resume from sleep. Typically, I'll resume and I'll get a message stating that the display driver failed to respond and has recovered. Sometimes, I'll resume and get a black screen, so I'll reboot and then I'll get the BSOD pointing to nvlddmkm.sys I...
BSOD Help and Support
BSOD with sleep/resume
Hello, first post, need some help debugging a homebuilt system. Since built have had trouble with sleep/resume crashes. Tried updating drivers, several settings in device manager, and BIOS changes to no avail. In the end, I nuked the hard drive and did a complete re-install from the ground up. ...
BSOD Help and Support
BSOD when S3/reboot resume, DRIVER_POWER_STATE_FAILURE error 0x9f
Dears, We use Intel Cedar trail platform. When we run S3/reboot long time test, system occurs BSOD issue. The error message is DRIVER_POWER_STATE_FAILURE, and error code is 0x9f. The detail information is in attachment. Any suggestion for us? Thanks for your help.
BSOD Help and Support
BSOD on resume from sleep
Specs New install of windows 7 ultimate x64, reformat, old os was a linux variant older hardware, dual core amd 4200, nvidia gt2 250, 2 gig ram Besides the windows 7 drivers, I had to install a realtek ac 97 audio driver, which works. I installed nvidia's latest drivers. Computer seems to...
BSOD Help and Support
BSOD after resume from sleep
Hi, I'm hoping to get some help. About a month ago my pc started going to BSOD while trying to resume after being put to sleep. PC is 16 months old. I read the forums, etc and updated the ATI radeon display driver and the Realtek network driver but the problem persisted. I also rolled back...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:55.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App