Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD ntoskrnl.exe

18 Oct 2015   #21
axe0

Windows 10 Pro
 
 

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.
  1. Uninstall Daemon Tools
  2. Download the SPTD standalone installer and follow these steps:
    • Double click the executable to open it
    • Click on the button shown below



If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window.


There are multiple 0xF4(CRITICAL_OBJECT_TERMINATION) and a 0x7A(KERNEL_DATA_INPAGE_ERROR).
Both crashes have similar causes.


Please run a threat scan with Malwarebytes*, a full scan with your AV, scan your system with Adwcleaner, Kaspersky TTDSKiller and ESET Online Scanner
*(Uncheck trial version in the installation process)




BSOD ntoskrnl.exe Diagnostic Test BSOD ntoskrnl.exe
 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums

Note   Note


MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.



My System SpecsSystem Spec
.
18 Oct 2015   #22
dunliku

Windows 7 x64 Home Premium
 
 

I didn't run the memtest yet, I'll do that tonight, I ran malware bytes and nothing came up, I uninstalled Daemon tools and verified with the SPTD installer. Yet, I still get bluescreens and I feel as if the errors are all over the place.
My System SpecsSystem Spec
18 Oct 2015   #23
dunliku

Windows 7 x64 Home Premium
 
 

Here is the latest BSOD, I ran a short mem test with 4 passes, I know i have to run a memtest with 8 passes, which I will do tonight. These BSODs are happening all of the the place.
edit: how do I check if my computer is using RAID? I've googled the answer but I got unclear answers.
My System SpecsSystem Spec
.

19 Oct 2015   #24
axe0

Windows 10 Pro
 
 

Do you know what cable(s) you have and how the hard drives are connected?

It looks now like there is a problem with the setup of your hard drives, the cause is the same as the 3rd post
My System SpecsSystem Spec
19 Oct 2015   #25
dunliku

Windows 7 x64 Home Premium
 
 

My hard drives are all connected to the motherboard with SATA 3 cables. The last thing I can think of that is a problem related to the hard drive is the port on the motherboard that is connected to the SATA cable is bad, because I already swapped the SATA cable and the hard drive. If this does not work, I can only think of a software related problem, or something to do with RAID possibly.
I may end up sending my entire PC to a computer shop if i still get BSODs with the SATA port swapping.
My System SpecsSystem Spec
19 Oct 2015   #26
dunliku

Windows 7 x64 Home Premium
 
 

Also, I have preformed the memtest with 8 passes, no errors have occured.
My System SpecsSystem Spec
19 Oct 2015   #27
axe0

Windows 10 Pro
 
 

Please download, install and run CPU-Z.
When you have CPU-Z open, make screenshots of the tabs
  • CPU,
  • Mainboard,
  • Memory,
  • SPD (every slot),
  • Graphics
and post the screenshots.
My System SpecsSystem Spec
19 Oct 2015   #28
dunliku

Windows 7 x64 Home Premium
 
 

Here is everything.
CPU

Mainboard/Motherboard

Memory

Slot 1

Slot 2

Slot 3

Slot 4

Graphics


just an fyi, I know the my hyperx furies are at a higher frequency then my corsair vengance, so I set my motherboard to run the ram all the ram at a lower frequency, or else it would create BSODs.
My System SpecsSystem Spec
19 Oct 2015   #29
axe0

Windows 10 Pro
 
 

It looks fine to me, but I am no expert.

I'd like to try testing the drivers to see if that gives anything.
If it doesn't give anything, I'll ask the hardware expert for assistance as the hardware problem would be beyond my knowledge.




BSOD ntoskrnl.exe Diagnostic Test BSOD ntoskrnl.exe
 DRIVER VERIFIER

warning   Warning
Please make a backup of your important files and get your rescue media or create one.
Please create a restore point.

Please follow this tutorial to run driver verifier.

Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.

Note   Note
Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.
My System SpecsSystem Spec
19 Oct 2015   #30
dunliku

Windows 7 x64 Home Premium
 
 

Sadly, I got a bluescreen. My computer failed to start up windows, and attempted to restart. Then, my computer was able to get into windows desktop, but then had a bluescreen. At that point, I restarted the computer and went to safe mode to disable the verifier, but I accidently mistook the "Display existing settings" for "Delete the existing settings", and did not delete the settings at all. However, once I restarted the computer, I was able to get into the desktop without a BSOD. At that point, I disabled the verifier. Here is the zip.

edit: I think the problem has something to do with Intel Rapid Storage Technology. My computer was in use for roughly an hour to 2 hours without Intel Rapid Storage Technology, and I got a BSOD (not using verifier). I left my computer on with verifier with Intel Rapid Storage Technology installed (the latest version), as if I was actually using it, leaving a intense game on and a livestream, and it does not crash after 2+ hours.
My System SpecsSystem Spec
Reply

 BSOD ntoskrnl.exe




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD random most times ntoskrnl.exe+748c0 and ntoskrnl.exe+74ec0
BSOD random, probably under heavy load situations. I dont know how to do. DM log collector file attached many thanks
BSOD Help and Support
BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40)
Got my first blue screen of death tonight, had 2 firefox opened one watching youtube video another browsing internet. After bsod it restarted i login but just black screen with cursor, ctrl alt delete worked so i shut my computer down. Boot up normally after, check my minidump file, bsod cause...
BSOD Help and Support
Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0)
Hey guys so I've been getting some random BSOD errors every few days or so. I usually leave my computer on when I am at work or sleep and either when I come home or wake up my computer is off. So I turn it on and it says that the computer didn't shut down properly when I start up. I downloaded...
BSOD Help and Support
0x00000124 ntoskrnl.exe ntoskrnl.exe+4a63cc BSOD Error runninganygame
i keep getting BSOD when playing game new graphics i dont know where to start when its comes to BSOD stuff 110414-10576-01.dmp 11/4/2014 10:48:39 PM 0x00000124 00000000`00000000 fffffa80`0af318f8 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+4a63cc ...
BSOD Help and Support
BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys
Hi, to make things easier for you,below is the Bug Check String, Driver, and crash address SYSTEM_SERVICE_EXCEPTION___dxgmms1.sys___ntoskrnl.exe+75bc0 MEMORY_MANAGEMENT_______ntoskrnl.exe____ntoskrnl.exe+75bc0 SYSTEM_SERVICE_EXCEPTION___ntoskrnl.exe____ntoskrnl.exe+75bc0...
BSOD Help and Support
Random BSOD Reporting ntoskrnl.exe+75c40 & ntoskrnl.exe+7efc0
I'm getting random Blue Screens and can't figure out why. I'm not running any hardcore programs. I'm mostly just using Microsoft Office and Firefox. The BSOD's seem to happen when I'm in Outlook, Excel or Firefox. Haven't been able to determine exactly which at the time as I'm moving back and...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:26.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App