Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD while working on PC

24 Oct 2015   #1
Hella737

Windows 7 Ultimate x64
 
 
Random BSOD while working on PC

Hi,
My system was built in September on a ASUS X99-WS/IPMI motherboard and Geforce GTX 980 Ti.
System is primarily used for high end video and graphic projects.
In the beginning there were frequent instances of freezing up just as the Windows 7 flash screen came up. After a few restarts the system would come up and seem to work. System was at the shop and came back after replacing a memory module.
A week or so later the BSODs started happen in random and it has continued without giving any clue other than:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1044

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000007
BCP2: FFFFFA801A082AE8
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\102315-15475-01.dmp
C:\Users\Hella\AppData\Local\Temp\WER-134582-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
_________________________________________________________________________
The only thing part from memory and GPU installed is a PCIe Hauppage Collussus 2 Video Capture card.
There are a number of hard drives installed and also I use a 10 TB NAS server for storage of projects.

Attached is a zip file with the information gathered from the system.

Any assistance would be greatley appreciated.
Thank you in advance,
Helge Larsen


My System SpecsSystem Spec
.
24 Oct 2015   #2
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Hello Hella,

An interesting 0x124. Usually these generic STOP codes give us no indication of what the problematic piece of hardware is, however in your case we're in luck. If we run !errrec on the address of the WHEA_ERROR_RECORD structure we can see that it verifies your issue being prevalent at boot.
Code:
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000007, BOOT Error
Arg2: fffffa8019ed46a8, Address of the WHEA_ERROR_RECORD structure.
Arg3: 0000000000000000
Arg4: 0000000000000000

11: kd> !errrec fffffa8019ed46a8
===============================================================================
Common Platform Error Record @ fffffa8019ed46a8
-------------------------------------------------------------------------------
Record Id     : 01d10075b87daa45
Severity      : Fatal (1)
Length        : 1304
Creator       : Microsoft
Notify Type   : BOOT Error Record
Timestamp     : 10/6/2015 20:29:41 (UTC)
Flags         : 0x00000002 PreviousError
Looking further down the readout we see a PCI Express root port is being blamed. This is where we're in luck as it gives us a VenID and a DevID for the problematic device.
Code:
===============================================================================
Section 0     : PCI Express
-------------------------------------------------------------------------------
Descriptor    @ fffffa8019ed4728
Section       @ fffffa8019ed4770
Offset        : 200
Length        : 208
Flags         : 0x00000001 Primary
Severity      : Fatal

Port Type     : Root Port
Version       : 1.16
Command/Status: 0x0010/0x0000
Device Id     :
  VenId:DevId : 8086:2f08
  Class code  : 000604
  Function No : 0x00
  Device No   : 0x03
  Segment     : 0x0000
  Primary Bus : 0x00
  Second. Bus : 0x00
  Slot        : 0x0000
Sec. Status   : 0x0000
Bridge Ctl.   : 0x0000
Express Capability Information @ fffffa8019ed47a4
  Device Caps : 00000000 Role-Based Error Reporting: 0
  Device Ctl  : 0000 ur fe nf ce
  Dev Status  : 0000 ur fe nf ce
   Root Ctl   : 0000 fs nfs cs

AER Information @ fffffa8019ed47e0
  Uncorrectable Error Status    : 00000000 ur ecrc mtlp rof uc ca cto fcp ptlp sd dlp und
  Uncorrectable Error Mask      : 00000000 ur ecrc mtlp rof uc ca cto fcp ptlp sd dlp und
  Uncorrectable Error Severity  : 00062030 ur ecrc MTLP ROF uc ca cto FCP ptlp SD DLP und
  Correctable Error Status      : 00000000 adv rtto rnro dllp tlp re
  Correctable Error Mask        : 00002000 ADV rtto rnro dllp tlp re
  Caps & Control                : 00000000 ecrcchken ecrcchkcap ecrcgenen ecrcgencap fep
  Header Log                    : 00000000 00000000 00000000 00000000
  Root Error Command            : 00000000 fen nfen cen
  Root Error Status             : 00000000 MSG# 00 fer nfer fuf mur ur mcr cer
  Correctable Error Source ID   : 00,00,00
  Correctable Error Source ID   : 00,00,00
Chasing through your hardware we can see that it's your Intel Xeon E5 v3/Core i7 PCI Express Root Port 3:
Code:
Memory Address 0xFA500000-0xFA507FFF    
ASMedia XHCI 1.0 Controller    
Memory Address 0xFA500000-0xFA507FFF    
Intel(R) Xeon(R) E5 v3/Core i7 PCI Express Root Port 3 - 2F08
As this shares a memory address with your ASMedia XHCI Controller I've looked at the driver date and it does appear to be old. Check your motherboard vendor for an updated version to see if this cures the issue, it may not as this is just a hunch but it's worth a try for the first round of troubleshooting.
Code:
asmtxhci     ASMEDIA XHCI Service   25.07.2014 04:15:34
This is also a strange one, seemingly blaming Sysinternals NotMyFault. Isn't that a book?
Code:
BugCheck D1, {fffff8a011379010, 2, 0, fffff8800ea0c385}

*** WARNING: Unable to verify timestamp for myfault.sys
*** ERROR: Module load completed but symbols could not be loaded for myfault.sys
Probably caused by : myfault.sys ( myfault+1385 )
My System SpecsSystem Spec
24 Oct 2015   #3
axe0

Windows 10 Pro
 
 

Boozad, the 0x124 usually doesn't reveal enough when it is an Authentic error
Code:
STACK_COMMAND:  kb

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: GenuineIntel

IMAGE_NAME:  GenuineIntel

DEBUG_FLR_IMAGE_TIMESTAMP:  0
As you have noticed, it is a big difference


Few months later found out this is incorrect
My System SpecsSystem Spec
.

24 Oct 2015   #4
Pauly

Win7 Ultimate X64
 
 

sysinternals have a tool to generate a blue screen and to my knowledge the output of that would indicate myfault.sys

Not sure about this either
Attachment 374337
My System SpecsSystem Spec
24 Oct 2015   #5
Hella737

Windows 7 Ultimate x64
 
 

Thank you so much for your express response to my problem.
I did find an updated driver ASMEDIA XHCI Service dated new date is 02.12.2015 v. 116240.
In the middle of installing the driver I had new BSOD, but it did not generate a DUMP file.
So, I made a new dump file with "Not My Fault" trigger. I have attached this file in the new zip file, 102415-13182-01.dmp.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1044

Additional information about the problem:
BCCode: d1
BCP1: FFFFF8A012079800
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF8800F40B385
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\102415-13182-01.dmp
C:\Users\Hella\AppData\Local\Temp\WER-25272-0.sysdata.xml

After rebooting I reinstalled the new driver and so far it all looks good....
Funny thing is that the boot "freezes" for 2-3 seconds during the W7 flash screen and keyboard wired to USB 3 goes dead until the OS is loaded.
This is not new, but I was hoping a newer driver would fix that issue.
From your posting it seems logical to me that the new driver may fix my BSOD issue. But, I will wait a few days before I close the post, just in case.

Again, thank you for great support!!
My System SpecsSystem Spec
24 Oct 2015   #6
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

The NotMyFault crashes are not really of an use (thanks to Pauly for pointing that out) so no need run that again. I'd also take Pauly's advice and uninstall TweakBit, it's not going to be doing any good.

Test the system by using as normal and upload new logs if you experience any more BSODs. Hopefully that driver has sorted things out, if not we'll look at what you have installed in your PCI-e slots.
My System SpecsSystem Spec
27 Oct 2015   #7
Hella737

Windows 7 Ultimate x64
 
 

I had another BSOD this morning. The PC was idle from my side, but running a cloud backup Acronis.
I also had reverted back to BIOS version 701 because that was one of the things I had upgraded to 803 at the time the BSODs started.
I have a Hauppauge Colossus 2 videocapture card in slot 1 and Gigabyte Geforce GTX 980 Ti in slot 3.
No other changes have been made since the last BSOD I sent in.
Attached is a new zip file from this morning.
If there is any other information needed, please let me know.
Thank you.
My System SpecsSystem Spec
27 Oct 2015   #8
Hella737

Windows 7 Ultimate x64
 
 

I forgot to copy in the on-screen information, but here it is:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1044

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA801A13B028
BCP3: 00000000BA000000
BCP4: 0000000081000402
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\102715-12402-01.dmp
C:\Users\Hella\AppData\Local\Temp\WER-28735-0.sysdata.xml
My System SpecsSystem Spec
27 Oct 2015   #9
Hella737

Windows 7 Ultimate x64
 
 

Some additional information.
I installed Core Temp to see real-time temperatures because it was suggested on some other board.
Then I started p95 to load up to 100 %.
CPU Temps went high and it triggered another BSOD at about 95 DegC.
In BIOS I set max allowable temp to 100 and in the Corsair PSU Monitor I set it to high fan speed at 75 C.
Now idle temp is around 55-60 and at 100 & load CPU is at 65-75 DegC.
Can this have been the BSOD issue I have had all the time?


Again, thank you.

I hope this was it....
My System SpecsSystem Spec
27 Oct 2015   #10
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Both 0x124s again, this time they're not pointing towards anything though. Given that the first batch of dumps were pointing towards a PCI-e issue I'd recommend removing the Hauppauge Colossus card and testing the system under normal usage.
My System SpecsSystem Spec
Reply

 Random BSOD while working on PC




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD while working with Desktop
Hi guys, I know someone can help me within this forum and would greatly appreciate your wisdom about this matter. I keep on getting an error about DRIVER_IRQL_NOT_LESS_OR_EQUAL which is I am not sure if being caused by rdyboost.sys or ntoskrnl.exe. I made sure that my system is fully...
BSOD Help and Support
Random BSOD - Mostly when working with windows explorer
Hey! For years I never had blue screen problems and I don't know how to handle them by myself. So I hope you can help me :) I checked the "BSOD - Posting Instructions" but there is no hint what type of dump I should create? So for now, I just have created the SF Debug Tool zip. Hope that...
BSOD Help and Support
Repeated, random BSOD. Will keep restarting until working.
So, I've got a ticking time bomb here...trying to get help as soon as I can. Display driver reset and timeout failed, something like that. On occasion I can't even get to windows before the system crashes. Tried last known good config, windows memory diagnostics, startup repair finds stuff...
BSOD Help and Support
Random BSOD on longterm working pc
I have had this pc running fine for over a year now. No hardware changes, no software upgrades or anything lately. Only a windows update a few days ago. A few days ago when it was very hot (my pc is upstairs where it gets extremely hot, been on for days downloading but has the side cover off with...
BSOD Help and Support
Multi BSOD when i start up and random while working.
************** Exception Text ************** System.UnauthorizedAccessException: Access to the path 'C:\Windows\Minidump' is denied. at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.Directory.InternalGetFileDirectoryNames(String path, String...
BSOD Help and Support
Random BSOD - Need help working out why
Hi Iv been getting random BSOD for a while new, iv updated drivers. Ran memtest86+ (only one pass) every thing was ok. But my motherboard biostar ta790gx 128m hasa side port of DDR2 memory for the graphics & im not sure if memtest can test that or not I keep getting different error's &...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:24.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App