Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD 0x01E after a fresh install on win7 ulti 64-bit

25 Oct 2015   #1
LoneBear

Windows 8.1 64-bit
 
 
BSOD 0x01E after a fresh install on win7 ulti 64-bit

Hi all

My good lady has been having some problems with her computer. so i did a fresh install of windows 7 on her pc and a few days ago she got a BSOD. The pc rough specs are

AMD FX-8120 stock clock
8 gb of ram 1333Mhz
3 sata HDD - 2 x 120GB 5400rpm 1 x 120GB 7200rpm
evga 550 TI soc
gigabyte motherboard

all the drivers are up to date i believe. i thought that a fresh install would sort out all the problems but i guess not, witch got me thinking that it could be a hardware issue maybe but im not to sure and thats why i am here. i have used the DM Log Collector and attached the file to the post.

thanks for your time
i didnt no where else to go


My System SpecsSystem Spec
.
25 Oct 2015   #2
axe0

Windows 10 Pro
 
 

Hi LoneBear,

Welcome to the 7forums.

First of all, thank you for the excellent job with filling in your system specs

Please remove the Gigabyte software, the Gigabyte software is known for causing various of problems.
Please check the manufacturer of the motherboard (Gigabyte) for BIOS updates.

Unfortunately, after many tries I can't read the dump file properly what makes that its information cannot be trusted.
This could be due to hardware problems.
(Soon I will give it a few extra tries to read the dump file.)
Please follow instructions below for testing the hardware, if there are any questions please don't hesitate to ask them.




BSOD 0x01E after a fresh install on win7 ulti 64-bit Diagnostics Troubleshooting BSOD 0x01E after a fresh install on win7 ulti 64-bit
Read carefully before proceeding.


warning   Warning
If you're overclocking your system, revert back to stock clocks now.

Note   Note
Test the system once the overclock is removed before continuing with the steps outlined below.


Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test




BSOD 0x01E after a fresh install on win7 ulti 64-bit ONE BSOD 0x01E after a fresh install on win7 ulti 64-bit
 CPU TEST

Run Prime95 to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 7 Help Forums

warning   Warning
Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.





BSOD 0x01E after a fresh install on win7 ulti 64-bit TWO BSOD 0x01E after a fresh install on win7 ulti 64-bit
 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Help Forums

Note   Note


MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.





BSOD 0x01E after a fresh install on win7 ulti 64-bit THREE BSOD 0x01E after a fresh install on win7 ulti 64-bit
 HDD TEST

Run SeaTools to check the integrity of your HDD. SeaTools - HDD test - Windows 7 Help Forums

Note   Note
Do not run SeaTools on an SSD as the results will be invalid.


Run chkdsk Chkdsk - HDD Test - Windows 7 Help Forums




BSOD 0x01E after a fresh install on win7 ulti 64-bit FOUR BSOD 0x01E after a fresh install on win7 ulti 64-bit
 GPU TEST

Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 7 Help Forums

Note   Note
Run Furmark for around 30 minutes.

warning   Warning
Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.
My System SpecsSystem Spec
25 Oct 2015   #3
LoneBear

Windows 8.1 64-bit
 
 

thanks for your quick reply

i will start running the memory test tonight as i no that it will take a good bit of time and tomorrow i will post the result of all the tests. Also i will uninstall all the gigabyte bloatware. i only installed them in a just in case something went wrong. but i will do as you ask

i have my GFs mini dump file on its own on my pc witch i will attach just in case the one that you got was corrupt in anyway, i doubt it, but you never know :P

thanks again and ill get in touch with the results when i have them.


BTW the chkdsk link of the guide you gave is broken, thought id let you know.
My System SpecsSystem Spec
.

25 Oct 2015   #4
axe0

Windows 10 Pro
 
 

Thank you for reporting the broken link, I have fixed it
Also the link for chkdsk again just in case.

Unfortunately, the dump is the same as in the first uploaded zip file.
This is not due to problems with uploading if you might have thought it.
My System SpecsSystem Spec
26 Oct 2015   #5
LoneBear

Windows 8.1 64-bit
 
 

hello again

its results time, im still waiting for the CPU test to finish but everything seems to be good.

Ram - i ran the test over night like i said witch was about 12 hours with no errors, i was abit of a shock about that expecting the worse.
GPU - i done 3 tests on furmark and the 1st test BSOD with a stop code of 0x03B(mini dump attached) but i did do it again (custom test) and it worked fine getting a 80'c max temp. i did it again using the 720p preset and it came back fine scoring it at 1659 -27fps and a max temp of 80'c again.
HDD - i run the seatool and done all the tests running from short to advanced with no problems, also just finished doing the chkdsk on all 3 drives witched showed no errors. witch again shocked me as the hdds are about 10 years or so and still going strong.

i am in the process of testing the the CPU using prime 95 witch i doubt anything will show up, if anything it'll most likely be an over heat issue but i doubt it as shes running an Arctic freezer 7 Pro and not a stock fan, but ill update is anything changes.

the fact that the GPU test BSOD makes me believe that it could be problem but ill let you decide with the minidump.

is there anymore info or anything i can do to help please let me know.

thanks again for all your time.
My System SpecsSystem Spec
26 Oct 2015   #6
LoneBear

Windows 8.1 64-bit
 
 

just to add one thing i forgot to do was removing the bloatware from gigabyte witch i will do after the CPU start finishes

update:
worker 5 on prime states an error.
FATAL ERROR: Rounding was 0.5 expecting less then 0.4

any idea what that means?
My System SpecsSystem Spec
26 Oct 2015   #7
axe0

Windows 10 Pro
 
 

What it exactly means I am not sure, I am not quite of an expert with hardware but do know enough for troubleshooting.
What it basically means is that your CPU is causing trouble, if it is the only cause we cannot yet say.
My System SpecsSystem Spec
26 Oct 2015   #8
LoneBear

Windows 8.1 64-bit
 
 

ok so my gf cpu is on the blink. im guess that workers = cores? if im right she has a problem with core 5 and 7 after 3 hours core 7 had the same issue as core 5 with the FATAL ERROR: Rounding was 0.5 expecting less then 0.4.
after 6 hours of cpu testing 2 out of 8 cores failed.

by any chance is there away of making the cpu more stable? would you think that underclocking her cpu work better? or do you think its a total loss?
My System SpecsSystem Spec
26 Oct 2015   #9
axe0

Windows 10 Pro
 
 

Please do me a favor and check the site of Intel (again) for CPU driver updates.
Other then drivers, I cannot think of anything else that might help.
My System SpecsSystem Spec
26 Oct 2015   #10
LoneBear

Windows 8.1 64-bit
 
 

i will do but its for her AMD not my intel :P

but thanks again for all your help in the matter i didnt no what else to do as normally a fresh install works for me when my pc is having problems. but not i no where to start looking ill see what i can do from here.

keep up the good work and no doubt you will be seeing me here again soon.
My System SpecsSystem Spec
Reply

 BSOD 0x01E after a fresh install on win7 ulti 64-bit




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Still getting BSOD after fresh install of win7 on new ssd with new ram
Hi, I have been getting bsod for a while now and on a bit of research tried memtest86 and had errors on test 13 (corsair vengeance 8gb 2 X 4gb) so I went and got some new ram (corsair vengeance pro 16gb 2 X 8gb) and at the same time a new ssd for a fresh install of win 7 so fresh install of...
BSOD Help and Support
BSOD even after fresh install of Win7
Been getting this BSOD randomly. Thought was the vga card as computer would not wake up the next morning after being on all night. And computer would not POST once, only worked when took out vga card and used onboard video. I've since purchased and installed a new vga card. And reinstalled windows...
BSOD Help and Support
BSOD on a fresh install (win7 pro 64 bit)
I am getting plagued by BSoDs on a fresh (installed yesterday) install of windows 7 pro 64-bit. This is the second time that windows 7 was installed on this system. The first was also plagued by BSoDs any help would be greatly appreciated Is Windows 7 . . . - x86 (32-bit) or x64 ? ...
BSOD Help and Support
BSOD on fresh install of Win7
Well, I guess I wasn't as lucky as I thought. 5 days then boom. dump files attached. Dammit. :mad:
BSOD Help and Support
BSOD after fresh Win7 Install
I've been having random BSOD crashed for about a year now, since I assembled this machine. 3 or 4 different error codes, all of which pointed to memory issues from what I could find online. I performed a fresh install of Win7 a few nights ago, including a format of my HDD. 2 or 3 days later, the...
BSOD Help and Support
BSOD on fresh new install of Win7 Home x64
Hi, last night I had a BSOD coming out of nowhere. I left the PC idle for a couple of hours and when I came back I woke up my LCD screen (I deactivated all the sleep options except for the screen) and launched Chrome to go on facebook or something. As soon as I clicked on the FB favorite, I got...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:24.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App