Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 x64 BSOD display driver nvlddmkm.sys Stop code: 0x116

25 Oct 2015   #1
zoghrob

Windows 7 Ultimate x64
 
 
Windows 7 x64 BSOD display driver nvlddmkm.sys Stop code: 0x116

Hi.
I'm using windows 7 ultimate x64.
For about 10 days now I've been encountering BSOD stating that display driver timed out with stop:0x00000116 and nvlddmkm.sys. ..
I tried the usual BSOD stuff but to no avail. ..

I uninstalled the display driver then installed the latest driver. ..
I uninstalled the display driver, deleted old files then clean installed the latest driver. ..
I noticed that the cpu temp is around 45c idle and 60 to 68 working... so I changed the cpu fan with a new one and the cpu temp now is around 39 idle and 58 to 60 working. ...
I even rigged a fan for my gpu card...

All done with no effect except delaying the BSOD.... but when it happens it recurs quickly after restart (hard resef)...

My system consists of

Cpu Core 2 duo E7400 2.8 GHz
GA EP45UD3R
Point of view 9400 GT 1GB ram
4GB RAM as 2 modules

Please help me.

I'm frustrated as I can't use my computer.
I'm sending this from my smart phone. ..

Is the display card faulty ???


My System SpecsSystem Spec
.
25 Oct 2015   #2
axe0

Windows 10 Pro
 
 

Hi zoghrob,

Welcome to the 7forums.

Please re-run the tool and upload the new zip file, there are some files missing.
My System SpecsSystem Spec
25 Oct 2015   #3
zoghrob

Windows 7 Ultimate x64
 
 

Here's the new file.
I hope it's complete this time as I had a hard time trying to run the tool as the BSOD surfaced every now and then.
Thanks for your time and effort.
My System SpecsSystem Spec
.

26 Oct 2015   #4
axe0

Windows 10 Pro
 
 

Please try to run the tool in safe mode
My System SpecsSystem Spec
26 Oct 2015   #5
zoghrob

Windows 7 Ultimate x64
 
 

Ok.
Here is the file from running the tool in safe mode.
Hope it helps to shed some light on the BSOD problem.
Thanks.
My System SpecsSystem Spec
26 Oct 2015   #6
axe0

Windows 10 Pro
 
 

You are running an ACER Product ID on a Gigabyte board.
This makes your installation counterfeit
Troubleshooting a counterfeit installation is useless as it is not known what has been modified to your system.
Code:
OS Manufacturer:           Microsoft Corporation
OS Configuration:          Standalone Workstation
OS Build Type:             Multiprocessor Free
Registered Owner:          xxxx
Registered Organization:   
Product ID:                00426-OEM-8992662-00006 <-- ACER PID on Gigabyte board.
Original Install Date:     12/01/12, 11:23:46 PM
System Boot Time:          26/10/15, 3:11:53 PM
System Manufacturer:       Gigabyte Technology Co., Ltd.
Install a genuine copy of Windows, if you still need help with BSOD's after installing a genuine Windows copy I'll gladly help.
My System SpecsSystem Spec
26 Oct 2015   #7
zoghrob

Windows 7 Ultimate x64
 
 

You mean this windows copy is not genuine. ..??
I haven't changed it as I got it installed on my pc when I bought it 5 years ago. . Besides, windows update is working normally and if I remember correctly, it passed the Microsoft genuine product test as I tried it when I got my pc back then to make sure it's original product. ..

However. ..this way we can't determine the cause of BSOD..

If so.. how will I ever install a new genuine version with the BSOD occurring every now and then? ??
Also. . Is there a way to install a new genuine windows without losing my fikes or is it possible to pay for this windowstto be genuine...

Sorry for asking many questions but what you told me is quite shocking to me as it never crossed my mind.

Thanks.
My System SpecsSystem Spec
26 Oct 2015   #8
axe0

Windows 10 Pro
 
 

This Product ID is one I have seen a lot, exactly the same.

The first step now is to install a genuine copy of Windows, prefered to install it clean to remove the modifications.
To prevent your data to be lost, you should backup them on different locations.
My System SpecsSystem Spec
26 Oct 2015   #9
zoghrob

Windows 7 Ultimate x64
 
 

Thank you for your help.
I'll try the safe mode to see if I can backup my data then try a fresh windows installation.
Hopefully the BSOD won't pop up during the installation. .
I've been using my phone in this thread as my pc didn't giveme any chance of writing thread rather than uploading files.
My System SpecsSystem Spec
Reply

 Windows 7 x64 BSOD display driver nvlddmkm.sys Stop code: 0x116




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD nvlddmkm.sys Bugcheck code: 0x116
Crash dumps are enabled on your computer. On Fri 23/10/2015 9:10:36 πμ GMT your computer crashed crash dump file: C:\Windows\Minidump\102315-31075-01.dmp This was probably caused by the following module: nvlddmkm.sys (nvlddmkm+0x833128) Bugcheck code: 0x116 (0xFFFFFA801299D4E0,...
BSOD Help and Support
Display driver and 2 types of BSOD nvlddmkm.sys & ntoskrnl.exe
EDIT : Added file extension to download. So after 1 and a half years I've had like 7 BSOD's, and most of them were ntoskrnl.exe which I would like to know how to solve, now I get nvidia display driver kernel stopped working and has recovered, followed by a black screen then recovering. So...
BSOD Help and Support
BSOD 0x116 & nvlddmkm.sys in GTX460
hi guys ------- My system ----------- CPU : Intel i5-2500k Main : Asus P8p67 rev3.0 Ram : 2x2gb gskill ddr3 1600mhz Graphic : gainward GTX460 2gb Hard : wd 500gb black series
BSOD Help and Support
BSOD playing games error 0x116, nvlddmkm.sys (display driver timeout)
Have been having this problem for a while now. From reading the forums I figured it must've been a faulty VGA. Tech support has replaced it for a brand new and have also given me a new PSU/Power Brick. Whenever I tried to do anything that was VGA-demanding, it would blue screen on me, even after...
BSOD Help and Support
display driver nvlddmkm stopped loop untill bsod after sli enable
after i enable sli in the nvidia control panel this is what happens. display driver nvlddmkm stopped responding and has successfully recovered multiple black screen flash loop until bsod then i have to boot into safe mode and uninstall the drivers. heres my System Information ------------------...
Graphic Cards
BSOD nvlddmkm.sys Attempt to reset the display driver failed
Hello people, I'm getting BSOD when trying to play games, or trying run 3DMark06. I've gotten serveral of different error messages, depending on which drivers i've tried to update. Now I've updated the latest Nvidia graphic driver(from nvidia website), sound card driver and the newest BIOS...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:25.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App