Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD, Kernel_Data_Inpage_Error, error 0x0000007A, parameter 2 c0000185

28 Oct 2015   #1
xtorch

Windows 7 Ultimate x64
 
 
BSOD, Kernel_Data_Inpage_Error, error 0x0000007A, parameter 2 c0000185

Hi,

My Dell Latitude E6410 notebook started to give frequent BSOD errors since last weekend.
First one came after I tried to copy some folders into flash drive, I guess it was on 25th October.
After that OS started to freeze after starting.
I cleaned and fixed some registries using JV16 and Spybot tools. Now the OS starts without freezing, but still getting BSOD form time to time, mainly when copying files.

Files are attached.

Any help will be appreciated.

Regards,
Khachatur


My System SpecsSystem Spec
.
28 Oct 2015   #2
axe0

Windows 10 Pro
 
 

Hi xtorch,

Welcome to the 7forums.

The 0x7A errors is one I have only seen with Input/Output errors, also this time.
This means that there are problems with reading the data from your hard drive.
To confirm the hard drive has problems, please run chkdsk and SeaTools and perform the short generic, long generic and SMART tests perfered in that order in SeaTools. If wanted you could always perform the other tests too in SeaTools.




BSOD, Kernel_Data_Inpage_Error, error 0x0000007A, parameter 2 c0000185 Diagnostics Test BSOD, Kernel_Data_Inpage_Error, error 0x0000007A, parameter 2 c0000185
 HDD TEST

Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use

Note   Note
Do not run SeaTools on an SSD as the results will be invalid.


Run chkdsk Disk Check
Code:
KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in.  Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: fffff6fc4000a928, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc0000185, error status (normally i/o status code)
Arg3: 00000000aee59860, current process (virtual address for lock type 3, or PTE)
Arg4: fffff8800152511c, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)

Debugging Details:
------------------

ERROR_CODE: (NTSTATUS) 0xc0000185 - The I/O device reported an I/O error.

DISK_HARDWARE_ERROR: There was error with disk hardware

BUGCHECK_STR:  0x7a_c0000185

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  CODE_CORRUPTION
Note   Note
Please run the DM Log Collector tool again and upload the zip file, there are quite some important files missing
My System SpecsSystem Spec
28 Oct 2015   #3
xtorch

Windows 7 Ultimate x64
 
 

Hi axe0,

Thanks for your reply.
I have used the SeaTools as you mentioned.
It passed short generic test and failed the long generic test.

Also tried WD Data Lifeguard Diagnostic Quick test:
Test Option: QUICK TEST
Model Number: WDC WD3200BEKT-75PVMT0
Unit Serial Number: WD-WXK1AB0P2561
Firmware Number: 01.01A01
Capacity: 320.07 GB
SMART Status: PASS
Test Result: FAIL
Test Error Code: 06-Quick Test on drive 1 did not complete! Status code = 07 (Failed read test element), Failure Checkpoint = 97 (Unknown Test) SMART self-test did not complete on drive 1!
Test Time: 00:48:33, October 29, 2015

Also tried Dell SystemAssist:
SMART Status Test
Test Started 10/29/2015 12:53:36 AM
Test Finished: Passed 10/29/2015 12:53:38 AM
SMART Thresholds Test
Test Started 10/29/2015 12:53:38 AM
Test Finished: Passed 10/29/2015 12:53:40 AM
Targeted Read Test
Test Started 10/29/2015 12:53:40 AM
Error Message: Error while reading sector 180390632. 10/29/2015 12:54:08 AM
Error Message: Error while reading sector 180368249. 10/29/2015 12:54:28 AM
Error Message: There was an error reading sectors 180369210 through 180369273. 10/29/2015 12:54:54 AM
Error Message: There was an error reading sectors 180384552 through 180384615. 10/29/2015 12:55:19 AM
Error Message: There was an error reading sectors 180389608 through 180389671. 10/29/2015 12:55:45 AM
Error Message: The test has encountered its limit of 5 sector errors. Testing will not continue. 10/29/2015 12:55:45 AM
Test Finished: Failed (Error code: WHD20-KD8)

SMART Conveyance Self Test
Test Started 10/29/2015 12:59:32 AM
Error Message: The device reported the following status: The previous self-test completed having the read element of the test failed. 10/29/2015 1:00:33 AM
Error Message: The first failing LBA value is 180368249 and the failure occurred after the device had been operating for 13099 power-on hours. 10/29/2015 1:00:33 AM
Test Finished: Failed (Error code: WHD12-JPR) 10/29/2015 1:00:36 AM
My System SpecsSystem Spec
.

28 Oct 2015   #4
axe0

Windows 10 Pro
 
 

It means your hard drive is failing/faulty.

If you have warranty, let your manufacturer replace the hard drive.
Else, you still need to contact your manufacturer for the hard drive replacement.
My System SpecsSystem Spec
Reply

 BSOD, Kernel_Data_Inpage_Error, error 0x0000007A, parameter 2 c0000185




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD - KERNEL_DATA_INPAGE_ERROR, STOP: 0x0000007A
Hello guys, This is my first post here. I keep on getting BSOD when I play Youtube. Can someone help? Thanks in advance!
BSOD Help and Support
How to fix BSOD KERNEL_DATA_INPAGE_ERROR 0x0000007A?
Good day, I've been experiencing BSOD KERNEL_DATA_INPAGE_ERROR 0x0000007A in my Sony Vaio netbook a several times. I noticed that this is occurring every time the netbook goes into a sleep mode. When I try to use again the netbook that went to a sleep mode, the BSOD KERNEL_DATA_INPAGE_ERROR...
BSOD Help and Support
BSOD with STOP 0x0000007A: KERNEL_DATA_INPAGE_ERROR
Hey guys, I started getting this error last night and my computer has been unstable since. I had some old dump files but along the way have formatted my SSD and the last BSOD didn't generate one for some reason... After this BSOD the comp reboots and says, "Reboot and select proper boot...
BSOD Help and Support
Getting random bsod's with error 0x0000007a (Kernel_Data_Inpage_Error)
Hello everyone, (First of all, I'm using a laptop MSI gt780-205fr bought in October 2011 so it is no longer under warranty.) A few months ago, I got a lot of random Bsod with error 0x0000007a and kernel_data_inpage_error. Also, my laptop couldn't create minidumps as it showed the error :...
BSOD Help and Support
BSOD while browsing w/Chrome, KERNEL_DATA_INPAGE_ERROR, bcc 0x0000007a
Parameter 1 0xc0418480 Parameter 2 0xc0000185 Parameter 3 0x021a3860 Parameter 4 0x8309050b caused by driver ntkrnlpa.exe Tried to find the solution online myself, but got too confused. From the description above, what seems to be the problem? A driver? Disk problem? Software? Windows...
BSOD Help and Support
BSOD, Kernel_Data_Inpage_Error, 0x000000F4 and 0x0000007A
Hi! I have problem with my computer i get BSOD randomly. - What is the age of system (hardware)? 2 Years. - What is the age of OS installation? Just re-installed. Some Computer info: OS-navn Microsoft Windows 7 Ultimate Versjon 6.1.7601 Service Pack 1 Build 7601 Systemnavn ...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:03.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App