Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD. USB ports seem to lose power.

30 Oct 2015   #1
jensdev

Windows 7 Ultimate x64
 
 
BSOD. USB ports seem to lose power.

Hello everyone,

Since a few days, I'm encountering a rather annoying problem on my desktop PC. My keyboard (and other USB items) often does not work upon start-up. I can use it to go into BIOS, but it stops working when I have to sign into Windows. Note that these USB items work fine on my laptop. Sometimes they do work upon start-up, but lose power after an hour or so. Trying to restart takes forever ('shutting down' screen takes about 15 minutes before generating a BSOD - DRIVER_POWER_STATE_FAILURE - details in ZIP).

I've also uploaded a printscreen of device manager (sorry for the Dutch). No exclamation marks for USB, however I do see one exclamation mark next to video controller. Not sure what this is. It says the drivers are not installed (Code 28). I'm not even sure what hardware device this concerns.

Further info: the USB legacy option in BIOS is enabled.
My next and final attempt would be to reinstall Windows, as nothing else has worked so far and I'm not quite that IT savvy. In other words, you guys are my last hope (:


My System SpecsSystem Spec
.
30 Oct 2015   #2
axe0

Windows 10 Pro
 
 

Hi jensdev,

You are running an ASUS Product ID on an ASRock board.
This makes your installation counterfeit.
Troubleshooting a counterfeit installation is useless as it is not known what has been modified to your system.
A counterfeit installation contains heavily modified code which causes the system to behave in unexpected ways.
For this reason, analyzing counterfeit systems is unreliable and most analysts won't try it.
Code:
Fabrikant van besturingssysteem:     Microsoft Corporation
Configuratie van besturingssysteem:  Zelfstandig werkstation
Type build:                          Multiprocessor Free
Geregistreerde eigenaar:             xxxx
Geregistreerde organisatie:          
Product-id:                          00426-OEM-8992662-00173 <-- ASUS PID on ASRock board
Oorspronkelijke installatiedatum:    18/08/2013, 21:01:35
Systeemopstarttijd:                  30/10/2015, 15:12:15
I recommend to install a genuine copy of Windows.
If, after you have installed a genuine copy of Windows, you still get BSOD's we'll be happy to assist you.
My System SpecsSystem Spec
30 Oct 2015   #3
jensdev

Windows 7 Ultimate x64
 
 

Hello axe0, thank you for your response.
I bought this desktop 2nd hand and it came with a clean Windows copy. I never bothered to reinstall a fresh copy of my own, nor did I ever receive any notification that my Windows was not genuine. I should still have a genuine Windows 7 copy though, which I'll install.
My System SpecsSystem Spec
.

10 Nov 2015   #4
jensdev

Windows 7 Ultimate x64
 
 

Hello everyone,
I've installed a fresh copy of Windows 7 but sadly, the problem as described in my initial post has not been resolved. I've attached a new ZIP file to my first post. Does anyone have any suggestions?
My System SpecsSystem Spec
10 Nov 2015   #5
axe0

Windows 10 Pro
 
 

There are no logs from any BSOD.
Please check {windows partition}\windows\minidump and check if there are any dump files saved.
Please make sure your pc is configured for small dump files How to configure minidump | Windows 7 tutorial

If daemon tools is installed, looking at the startup programs
Quote:
Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.
  1. Uninstall Daemon Tools
  2. Download the SPTD standalone installer and follow these steps:
    • Double click the executable to open it
    • Click on the button shown below



If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window
My System SpecsSystem Spec
10 Nov 2015   #6
jensdev

Windows 7 Ultimate x64
 
 

Hello Axe,
I created a new ZIP with minidump files. Strange they weren't in that folder automatically because I wrote this post right after I got a new BSOD. All system settings for creating minidumps are also correct.

I've gotten rid of Daemon Tools. It's been on my computer forever and never created any problems.
Maybe your trained eye can see something in the new ZIP file? I don't know if it's worth noticing, but the exclamation mark next to video controller in the device manager is also still there after clean Windows install.
My System SpecsSystem Spec
10 Nov 2015   #7
axe0

Windows 10 Pro
 
 

Daemon tools doesn't only use sptd.sys driver, but also uses its own poorly coded drivers that are known for causing BSOD's in Windows 7.

From the 2 dumps, these drivers have been flagged
Citrix USB driver
Driver Reference Table - ctxusbm.sys
Code:
fffff880`02524688  fffff880`0331f000Unable to load image \SystemRoot\system32\DRIVERS\ctxusbm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ctxusbm.sys
*** ERROR: Module load completed but symbols could not be loaded for ctxusbm.sys
 ctxusbm
Nvidia Video driver
Please uninstall everything of Nvidia using Display Driver Uninstaller and install new drivers from Nvidia. Be sure the clean install box is checked and only install the Graphics driver and the PhysX driver.
Code:
fffff880`03708838  fffff880`05d1b020Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
 nvlddmkm+0x230020
My System SpecsSystem Spec
10 Nov 2015   #8
jensdev

Windows 7 Ultimate x64
 
 

Citrix Receiver is software I actually need on a daily basis to connect to the server of my workplace. I can't use it anymore? Something wrong with the software itself or my installation?

I will reinstall Nvidia and report back if I still have issues. I've actually been having some issues with display drivers after reinstalling Windows, as sometimes my screen just blacks out on booting right when Windows is supposed to kick in.

Thanks for your help so far!
My System SpecsSystem Spec
10 Nov 2015   #9
axe0

Windows 10 Pro
 
 

Simply check the software for updates or re-install it.
My System SpecsSystem Spec
Reply

 BSOD. USB ports seem to lose power.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
All USB devices lose power when loading recovery media
Hey there! I actually have an open ticket with two companies, whom of which are having an issue figuring this out. Basically, if I use a USB or DVD/CD and load up recovery media software (regardless of whether I actually perform a recovery) OR even just loading Windows installation media, once I...
Hardware & Devices
Solid-state drives lose data if left without power for just a few days
Read more: Solid-state drives lose data if left without power for just a few days | ZDNet
News
USB Ports Not Providing Enough Power For Peripherals?
I have a custom built PC and a long time ago my mouse died. I thought it was due to the mouse just being faulty but I tried it with another PC and it worked perfectly. I was confused and tried the mouse in the bios settings of my computer and it worked perfectly again. However when I booted into...
Hardware & Devices
No power in the USB ports or possible burn out
I recently started using a USB fan(such as this but not exactly this http://www.cdrking.com/apanel/modules/products/images/large/1325_1.jpg ) to cool my laptop because I found it more efficient than a cooling pad. After a few days, the fan started to have problems such as dead LEDs and some...
Hardware & Devices
No power to USB Ports
HI I have a HP G7 1365DX laptop. One day was using my logitech mouse and next thing i know it stops working. Pluged the USB mouse into my desktop and it works fine. I have reinstalled my OS, Uninstalled my USB Host conroller and reinstall, same thing to USB Root hub, updated my boose and yes...
Hardware & Devices
BSOD Drive Power State Failure, ntoskrnl.exe, USB ports not working
Hi, I have a 2 week old HP Envy 14, running Windows 7 Home Premium 64bit, 4GB Ram, and an ATI Radeon HD 5650 Graphics card. Initially for the first few days the notebook worked well, no problems. This week, I encountered the dreaded BSOD. The notebook had trouble shutting down or restarting,...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:05.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App