Blue Screen

Page 2 of 2 FirstFirst 12

  1. zungul
    Posts : 176
    Windows 7 Ultimate x64
    Thread Starter
       New #11

    Button F8:

    Safe Mode - the same BSOD
    Safe Mode with Networking - the same BSOD
    Safe Mode with Command Prompt - the same BSOD
    Enable Boot Logging
    Enable Low-Resolution Video     - the same BSOD
    Last Known Good Configuration (advanced) - the same BSOD
    Directory Services Restore Mode
    Debugging Mode
    Disable automatic restart on system failure
    Disable Driver Signature Enforcement
    Start Windows Normally - the same BSOD
      My Computer
    Quote Quote

  3. axe0
    Posts : 7,050
    Windows 10 Pro
       New #12

    Ok, no diagnostics

    Please run MemTest86+ again, but this time 8 passes at least



    Diagnostic Test

     RAM TEST


    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums

       Note


    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
      My Computer
    Quote Quote

  4. zungul
    Posts : 176
    Windows 7 Ultimate x64
    Thread Starter
       New #13

    I can repeat it, but I've done this before. During 8 hours tested with Memtest86+ and everything was OK.
      My Computer
    Quote Quote

  6. axe0
    Posts : 7,050
    Windows 10 Pro
       New #14

    zungul said:
    The "Last Known Good Configuration" nothing Changed - still BSOD
    The Memtest86+ to Test RAM - Passed 6x
    The HD Diagnostic - Passed
    The full Disk Check (chkdsk /f) - I didn't see that it fix anything but after restart I get stuck in the Verifying DMI Pool Message.

    What I'm supposed to do to pass farther?
    You have done this, but I only see 6 passes, 2 passes too short.
      My Computer
    Quote Quote

  7. zungul
    Posts : 176
    Windows 7 Ultimate x64
    Thread Starter
       New #15

    OK, I'm going to do this test again.
      My Computer
    Quote Quote

  8. zungul
    Posts : 176
    Windows 7 Ultimate x64
    Thread Starter
       New #16

    Nothing
      My Computer
    Quote Quote

  10. axe0
    Posts : 7,050
    Windows 10 Pro
       New #17

    I would undo the overclock of the frequency and set it to DDR2-800 (400)
      My Computer
    Quote Quote

 
Page 2 of 2 FirstFirst 12

  Related Discussions
Hello, My laptop will not boot. I end up with an empty black screen or a blue screen with no icons, just a cursor. I get choices for 'normal startup' or ' repair' but not safe mode. Any help appreciated.
Today I booted my computer up to be promoted with a black screen, I gave it a good half an hour before forcing it to shutdown, to which when I booted it back up. Was then promoted with a blue screen about the video card not being able to lead, that happened twice. I then booted it into safe...
While using my laptop, usually when trying to open some "windows" application such as task manager, wireless networks, documents, media player, windows updater etc. my laptop freezes or doesn't allow me to click on anything except the minus button on all my windows and the start button. I'll try to...
Well i had my computer on all day since i woke up @ 8 in the morning gaming and what not. It had finally crashed on me while i was playing dirt 2 a couple of mins ago. I had fixed all my previouse blue screen problems by not using any AMD OverDrive Settings for my Radeon HD 4850. My specs...
Hello, I have an HP Pavilion g series laptop (running win7) that is in a continuous restarting loop. This happened after the computer auto updated (windows update). I do not know what was updated, but now every time the laptop starts up it seems to be in a continuous rebooting loop after the...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 10:49.
Find Us