Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Getting many different BSOD errors on new custom pc build

09 Nov 2015   #11
axe0

Windows 10 Pro
 
 

When you have another BSOD, just run the BSOD tool and upload the new zip


My System SpecsSystem Spec
.
10 Nov 2015   #12
Rednick

Windows 7 Home Prem SP 1 64 bit
 
 

Here is the new zip. Thoughts?
My System SpecsSystem Spec
10 Nov 2015   #13
axe0

Windows 10 Pro
 
 

Read the instructions for driver verifier carefully!




Getting many different BSOD errors on new custom pc build Diagnostic Test Getting many different BSOD errors on new custom pc build
 DRIVER VERIFIER

warning   Warning
Please make a backup of your important files and get your rescue media or create one.
Please create a restore point.

Please follow this tutorial to run driver verifier.

Some windows drivers are blamed in a few crashes, but that usually means that a 3rd party driver is actually the cause.
Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.

Note   Note
Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.
My System SpecsSystem Spec
.

11 Nov 2015   #14
Rednick

Windows 7 Home Prem SP 1 64 bit
 
 

Ran the driver verifier over night got on this morning and windows explorer crashed and the display crashed no BSOD just locked up no display just lines of color with a mouse cursor that would not move. I did the BSOD ZIP just in case you want something from it.
My System SpecsSystem Spec
11 Nov 2015   #15
axe0

Windows 10 Pro
 
 

The crash would be from the performance.
I can search until I am sick of it, but I doubt I would find something useful.
My System SpecsSystem Spec
11 Nov 2015   #16
Rednick

Windows 7 Home Prem SP 1 64 bit
 
 

Okay what should the next step be?
My System SpecsSystem Spec
11 Nov 2015   #17
axe0

Windows 10 Pro
 
 

Just keep driver verifier running for a max of 48 hours, or when you have a bluescreen, whatever comes first.

Please keep the performance issue in your mind.
My System SpecsSystem Spec
14 Nov 2015   #18
Rednick

Windows 7 Home Prem SP 1 64 bit
 
 

so no BSOD over 48 hours although I did have another graphics crash.
My System SpecsSystem Spec
15 Nov 2015   #19
axe0

Windows 10 Pro
 
 

And this graphics crash succesfully recovered?
Any moment noticed when it happens?
My System SpecsSystem Spec
16 Nov 2015   #20
Rednick

Windows 7 Home Prem SP 1 64 bit
 
 

No the graphics crash and pc locks up have to force reboot machine and tell windows start normally. With verifier running for at least 12 hours if I get on the PC (say after running through he night) PC freezes then graphics crash and will not recover by itself no matter how much time goes by(gave it a work day so 9 hours).
My System SpecsSystem Spec
Reply

 Getting many different BSOD errors on new custom pc build




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD errors, new custom build system, tried reformat.
I recently built a new system with my father and he has been having random BSODs with always a different error from day one. Unfortunately he tried to re-install so all I have is one .dmp file since the re-install. 0x7E dxgmms1.sys was the last one he encountered, I have an email with the...
BSOD Help and Support
Custom APU build, but has several windows update errors after instal
Hello, I just built a low cost PC for my parents, but I'm having trouble with several updates after I installed windows 7 Pro x64. I've tried going through the "get help with this error" link, but with no luck/confusing instructions. Code 800B0100 Code 800F0902 Code 9C57
Windows Updates & Activation
New Custom Build Please help BSOD
Am new here. And I too am suffering from random BSODs. Had faulty RAMs, and have replaced them. And still BSOD I seriously need help guys.
BSOD Help and Support
Various BSOD errors occurring seemingly randomly. Custom build.
My OS is Windows 7 Professional x64 These seem to happen erratically, at apparently random times, regardless of how heavily my system resources are being used. I've gone weeks without any errors, and I've faced several errors on the same day, even under the same computer usage patterns. I...
BSOD Help and Support
Constant BSOD on new custom build - Various Minidump Errors 0x0000003b
Hi Guys, This is my first attempt at building my own computer so I am not a pro by any means. I've been having issues with blue screens ever since I put the thing together. All the parts are new out of the box. When I first put the machine together I did some troubleshooting on my own and...
BSOD Help and Support
BSoD on Custom Build
Hello, I've been having persistent BSoD problems on a custom rig. It happens mostly when I'm away. Of the few times I have been at my computer at the time of crash, I saw no warning signs. Basic system info: Windows 7 Professional (x64) retail Fresh installation in March onto SSD...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:32.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App