Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Getting many different BSOD errors on new custom pc build

04 Nov 2015   #1
Rednick

Windows 7 Home Prem SP 1 64 bit
 
 
Getting many different BSOD errors on new custom pc build

Hello folks,

I am having issues with custom gaming rig I built not too long ago. It started basically after I finally got everything installed and happens randomly throughout gaming or even just my wife doing online school. Even the BSOD crash errors are random not showing any particular pattern at least not to my eyes.

On to the troubleshooting I have done. I have ran sfc \scannow, dxdiag, chkdsk \r, and memtest86. All of these come back with no issues except SFC says there are corrupted files that windows could not fix. I have ran full scans using Windows Security Essentials which did kill some Trojans. I also have ran Malwarebytes Anti-Malware free edition (yes with rootkits) which killed a lot of PUP optionals as well as a few malware infections and a couple more Trojans. After both killing these I have run these scans again with no threats found.

The Blue screens seem to happen when the PC is left alone for a while I stopped sleep mode thinking that might be it but even when the monitor goes to sleep and the PC is running normally if I come back to it an hour or so later it will be sluggish then BSOD as soon as you do anything that wasn't already on. It will also happen after gaming for more than a few hours.

Any help I could get sorting this out would be appreciated! I have attached what the Batch file did to this post.

Thanks for your time,


Nick


My System SpecsSystem Spec
.
04 Nov 2015   #2
axe0

Windows 10 Pro
 
 

Hi Rednick,

Welcome to the 7forums.

Please remove Gigabyte software, it is known for causing BSOD's.

There are a few crashes consistent, the 0x24, 0x4E and 0x1A.
The 0x4E and 0x1A are related to the memory and the 0x24 to the hard drive.
I suggest you run a few tests to determine if the problems are hardware.
I am aware you have performed some already, but please run them again according to the instructions below.

With SSD, only run chkdsk.
With HDD and SeaTools, prefered at least SMART, short generic and long generic tests.



Getting many different BSOD errors on new custom pc build Diagnostics Test Getting many different BSOD errors on new custom pc build
 HDD TEST

Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use

Note   Note
Do not run SeaTools on an SSD as the results will be invalid.


Run chkdsk Disk Check



Getting many different BSOD errors on new custom pc build Diagnostic Test Getting many different BSOD errors on new custom pc build
 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums

Note   Note


MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
My System SpecsSystem Spec
04 Nov 2015   #3
Rednick

Windows 7 Home Prem SP 1 64 bit
 
 

Thanks for the response.

I have one question regarding the Gigabyte software. ET6 is what is currently making my cpu cooling fans operate. Is there another way to control the fan power through the actual BIOS? also does this include HWMonitor? I will check back in once I am home and have performed your tests.
My System SpecsSystem Spec
.

04 Nov 2015   #4
axe0

Windows 10 Pro
 
 

I am sorry, but I can't tell you what other way you could control the fans. My BIOS is extremely basic with my laptop and I don't need any software for the fans.
My System SpecsSystem Spec
05 Nov 2015   #5
Rednick

Windows 7 Home Prem SP 1 64 bit
 
 

Update:

Haven't finished Memtest yet but Seatools SMART, Short Generic, and Long Generic tests all passed. I have also removed all Gigabyte software.
My System SpecsSystem Spec
07 Nov 2015   #6
Rednick

Windows 7 Home Prem SP 1 64 bit
 
 

Okay over 24 hours later memtest is finished. 9 pass no errors. Any other thoughts?
My System SpecsSystem Spec
07 Nov 2015   #7
axe0

Windows 10 Pro
 
 

Have there been new crashes?
My System SpecsSystem Spec
08 Nov 2015   #8
Rednick

Windows 7 Home Prem SP 1 64 bit
 
 

so far no BSOD but internet browsers are crashing now...
My System SpecsSystem Spec
08 Nov 2015   #9
axe0

Windows 10 Pro
 
 

Crashes that give no messages you mean?
My System SpecsSystem Spec
08 Nov 2015   #10
Rednick

Windows 7 Home Prem SP 1 64 bit
 
 

Yes says internet explorer stopped working. Also had another BSOD today.
My System SpecsSystem Spec
Reply

 Getting many different BSOD errors on new custom pc build




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD errors, new custom build system, tried reformat.
I recently built a new system with my father and he has been having random BSODs with always a different error from day one. Unfortunately he tried to re-install so all I have is one .dmp file since the re-install. 0x7E dxgmms1.sys was the last one he encountered, I have an email with the...
BSOD Help and Support
Custom APU build, but has several windows update errors after instal
Hello, I just built a low cost PC for my parents, but I'm having trouble with several updates after I installed windows 7 Pro x64. I've tried going through the "get help with this error" link, but with no luck/confusing instructions. Code 800B0100 Code 800F0902 Code 9C57
Windows Updates & Activation
New Custom Build Please help BSOD
Am new here. And I too am suffering from random BSODs. Had faulty RAMs, and have replaced them. And still BSOD I seriously need help guys.
BSOD Help and Support
Various BSOD errors occurring seemingly randomly. Custom build.
My OS is Windows 7 Professional x64 These seem to happen erratically, at apparently random times, regardless of how heavily my system resources are being used. I've gone weeks without any errors, and I've faced several errors on the same day, even under the same computer usage patterns. I...
BSOD Help and Support
Constant BSOD on new custom build - Various Minidump Errors 0x0000003b
Hi Guys, This is my first attempt at building my own computer so I am not a pro by any means. I've been having issues with blue screens ever since I put the thing together. All the parts are new out of the box. When I first put the machine together I did some troubleshooting on my own and...
BSOD Help and Support
BSoD on Custom Build
Hello, I've been having persistent BSoD problems on a custom rig. It happens mostly when I'm away. Of the few times I have been at my computer at the time of crash, I saw no warning signs. Basic system info: Windows 7 Professional (x64) retail Fresh installation in March onto SSD...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:56.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App