Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: First Custom Build....BSOD errors and flickering screen

19 Nov 2015   #51
cannoncd

Windows 7 - x64
 
 

Here's the malware scan results:

Adwcleaner and Kaspersky TTDSKiller came up clean.

ESET Online Scanner results attached.
SuperAntiSpyware found a LOT of tracking cookies, but that's it.


GPU test forthcoming


My System SpecsSystem Spec
.
19 Nov 2015   #52
cannoncd

Windows 7 - x64
 
 

Not sure if it's related, but my machine froze about 17m into the GPU stress test.
My System SpecsSystem Spec
19 Nov 2015   #53
cannoncd

Windows 7 - x64
 
 

The second test resulted in a BSOD at about the 25m mark.
My System SpecsSystem Spec
.

19 Nov 2015   #54
cannoncd

Windows 7 - x64
 
 

Ran the test successfully for 30 min. Is there supposed to be some kind of report available?
My System SpecsSystem Spec
19 Nov 2015   #55
axe0

Windows 10 Pro
 
 

Only important things are the temps and possible artifacts.
My System SpecsSystem Spec
19 Nov 2015   #56
cannoncd

Windows 7 - x64
 
 

The temp got to about 52 degrees and leveled off. I didn't notice any artifacts, but I also didn't sit there and stare the entire 30 min :-)
My System SpecsSystem Spec
19 Nov 2015   #57
cannoncd

Windows 7 - x64
 
 

Also, interesting enough, dropping down to two monitors did not fix the flickering issue.
My System SpecsSystem Spec
19 Nov 2015   #58
cannoncd

Windows 7 - x64
 
 

Attaching another DM log since the minidumps are starting to pile up.
My System SpecsSystem Spec
20 Nov 2015   #59
axe0

Windows 10 Pro
 
 

Hvae you done something with DriverMax setup?
I don't think so, because ESET probably would have deleted more if you did, but I'd like confirmation you haven't
Code:
C:\Users\Chris\Google Drive\Computer Backup\Downloads\Driver Stuff\DriverMax_7_Setup.exe	a variant of Win32/OpenCandy.A potentially unsafe application	cleaned by deleting - quarantined
How is it with only 1 monitor?
Code:
fffff880`02f8d538  fffff880`04170e2cUnable to load image atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
 atikmpag+0x42e2c
Please update this Samsung RAPID Mode Disk Filter driver from Samsung
Driver Reference Table - samsungrapiddiskfltr.sys
Code:
fffff880`02f1b948  fffff880`017aa1eeUnable to load image SamsungRapidDiskFltr.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SamsungRapidDiskFltr.sys
*** ERROR: Module load completed but symbols could not be loaded for SamsungRapidDiskFltr.sys
 SamsungRapidDiskFltr+0x161ee
1: kd> lmvm SamsungRapidDiskFltr
start             end                 module name
fffff880`01794000 fffff880`017d9000   SamsungRapidDiskFltr T (no symbols)           
    Loaded symbol image file: SamsungRapidDiskFltr.sys
    Image path: SamsungRapidDiskFltr.sys
    Image name: SamsungRapidDiskFltr.sys
    Timestamp:        Tue Sep 16 10:53:25 2014 (5417FA85)
    CheckSum:         000514E5
    ImageSize:        00045000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
This has come up a few times in different dumps.
The tcpip.sys driver is a driver related to the networking, this means that the network drivers or 3rd party drivers are trying to access the internet.
I suggest to update the network driver
Driver Reference Table - L1C62x64.sys
Code:
fffff880`02fff2d8  fffff880`01687b18 tcpip!TcpProcessExpiredTcbTimers+0xa8

1: kd> lmvm l1c62x64
start             end                 module name
fffff880`04353000 fffff880`04375000   L1C62x64   (deferred)             
    Image path: L1C62x64.sys
    Image name: L1C62x64.sys
    Timestamp:        Tue Jul 16 08:56:44 2013 (51E4EEAC)
    CheckSum:         0002912C
    ImageSize:        00022000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
My System SpecsSystem Spec
20 Nov 2015   #60
Pauly

Win7 Ultimate X64
 
 

People often misunderstand what furmark is supposed to look like, google the picture furmark renders and note the orangey red effect and the wave shapes in the blue background if yours is not identical then the picture is not rendering properly.

Heres an example of a good one

Attachment 376389


and heres what its not supposed to look like

Attachment 376390
My System SpecsSystem Spec
Reply

 First Custom Build....BSOD errors and flickering screen




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Getting many different BSOD errors on new custom pc build
Hello folks, I am having issues with custom gaming rig I built not too long ago. It started basically after I finally got everything installed and happens randomly throughout gaming or even just my wife doing online school. Even the BSOD crash errors are random not showing any particular...
BSOD Help and Support
Random BSOD errors, new custom build system, tried reformat.
I recently built a new system with my father and he has been having random BSODs with always a different error from day one. Unfortunately he tried to re-install so all I have is one .dmp file since the re-install. 0x7E dxgmms1.sys was the last one he encountered, I have an email with the...
BSOD Help and Support
BSOD Issue Custom Build PC, Screen and Sound go Haywire
Hello I've been having a BSOD issue that started last month. It has happened 7 times and i've ran memtest and checked my hard drives and they appear to running smoothly. The issue occurs when my computer has been left on for a while and often begins with the screen blurring and sound going...
BSOD Help and Support
Custom APU build, but has several windows update errors after instal
Hello, I just built a low cost PC for my parents, but I'm having trouble with several updates after I installed windows 7 Pro x64. I've tried going through the "get help with this error" link, but with no luck/confusing instructions. Code 800B0100 Code 800F0902 Code 9C57
Windows Updates & Activation
Various BSOD errors occurring seemingly randomly. Custom build.
My OS is Windows 7 Professional x64 These seem to happen erratically, at apparently random times, regardless of how heavily my system resources are being used. I've gone weeks without any errors, and I've faced several errors on the same day, even under the same computer usage patterns. I...
BSOD Help and Support
Constant BSOD on new custom build - Various Minidump Errors 0x0000003b
Hi Guys, This is my first attempt at building my own computer so I am not a pro by any means. I've been having issues with blue screens ever since I put the thing together. All the parts are new out of the box. When I first put the machine together I did some troubleshooting on my own and...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:50.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App