Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD New installation - windows updates

21 Nov 2015   #21
axe0

Windows 10 Pro
 
 

Here is how I would install them
  • Create a restore point prior to installing any of them,
  • Run SFC,
  • If SFC gives the message that there is no problem, install 1 update,
  • Run SFC,
  • If SFC gives the message that there is no problem, install 1 update,
  • Run SFC,
  • If SFC gives the message that there is no problem, install 1 update,
  • etc.




BSOD New installation - windows updates Diagnostics Test BSOD New installation - windows updates
 System File Check

Please try following:
  • Open an admin command prompt
  • Copy/paste "sfc/scannow" (without quotes) and press enter
  • When it finished reboot your system
  • Open again an admin command prompt
  • Enter sfc/scannow again
If sfc/scannow does NOT say "Windows Resource Protection did not find any integrity violation", please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.


My System SpecsSystem Spec
.
24 Nov 2015   #22
No mo

Windows 7 Home Premium 32bit
 
 

Another bsod occurred while i was attempting to watch a video on youtube. The video seemed to encounter an error and then the computer blue screened.
My System SpecsSystem Spec
24 Nov 2015   #23
correra

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 
To; No Mo

Hi,

Like you I am a newbe here ,so I don't claim to be a techie .However , after suffering with BSOD s every 2 to 3 minutes for 3 months ,and spending hundreds of dollars and hundreds of hours trying to find a solution and just about ready to spend up to $1000 on a new desktop computer , a kind soul in this forum made a simple suggestion that took only 4 clicks on my browser that solved my problem immediately.

This may not work for you ,but you really have only 5 minutes of your time to lose.In my case I explained that I could play HD Video on my hard drive (HD fullscreen 285MB for 36 minutes ) without any problem but through the internet ,I got the constant BSOD's.He suggested the following:

" What ever browser you're using disable hardware acceleration in it "


Through a Google search ,I found the following and bingo !!!!

Try it and let me know if it worked for you.

========================================

Let me fix it myself

To disable hardware acceleration, follow these steps:
  1. Click Start, and then click Internet Explorer or other browser.
  2. Click the Tools icon in the upper-right corner, and then click Internet Options.
  3. Click the Advanced tab, and then under Accelerated graphics, select the Use software rendering instead of GPU rendering check box.

  4. Click Apply, and then click OK.
  5. Close Internet Explorer and then restart it so that the change takes effect.
To enable hardware acceleration again, follow the previous steps, but in step 3, clear the Use software rendering instead of GPU rendering check box.

Did this fix the problem?,,,hope so!!
My System SpecsSystem Spec
.

25 Nov 2015   #24
No mo

Windows 7 Home Premium 32bit
 
 

I already disable hardware acc for firefox but thanks for the advice.
My System SpecsSystem Spec
25 Nov 2015   #25
axe0

Windows 10 Pro
 
 

Code:
KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in.  Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: c04902f8, lock type that was held (value 1,2,3, or PTE address)
Arg2: c000009c, error status (normally i/o status code)
Arg3: 3e53f820, current process (virtual address for lock type 3, or PTE)
Arg4: 9205f056, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)



BSOD New installation - windows updates Diagnostics Test BSOD New installation - windows updates
 HDD TEST

Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use

Note   Note
Do not run SeaTools on an SSD as the results will be invalid.


Run chkdsk Disk Check

Run HDTune to scan for errors, health and benchmark.
Let me know what the results are, prefered screenshots.
My System SpecsSystem Spec
26 Nov 2015   #26
No mo

Windows 7 Home Premium 32bit
 
 

Seems to be hard drive failure

Log Name: Application
Source: Microsoft-Windows-Wininit
Date: 2015/11/26 06:54:31 AM
Event ID: 1001
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: L22-PC
Description:


Checking file system on C:
The type of the file system is NTFS.

A disk check has been scheduled.
Windows will now check the disk.

CHKDSK is verifying files (stage 1 of 5)...
351744 file records processed.

File verification completed.
889 large file records processed.

0 bad file records processed.

0 EA records processed.

94 reparse records processed.

CHKDSK is verifying indexes (stage 2 of 5)...
430936 index entries processed.

Index verification completed.
0 unindexed files scanned.

0 unindexed files recovered.

CHKDSK is verifying security descriptors (stage 3 of 5)...
351744 file SDs/SIDs processed.

Cleaning up 2062 unused index entries from index $SII of file 0x9.
Cleaning up 2062 unused index entries from index $SDH of file 0x9.
Cleaning up 2062 unused security descriptors.
Security descriptor verification completed.
39597 data files processed.

CHKDSK is verifying Usn Journal...
36125008 USN bytes processed.

Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
Read failure with status 0xc000009c at offset 0x78d1fa8000 for 0x10000 bytes.
Read failure with status 0xc000009c at offset 0x78d1fb5000 for 0x1000 bytes.
Windows replaced bad clusters in file 168848
of name \Windows\System32\config\software.
351728 files processed.

File data verification completed.
CHKDSK is verifying free space (stage 5 of 5)...
223579285 free clusters processed.

Free space verification is complete.
Adding 268 bad clusters to the Bad Clusters File.
CHKDSK discovered free space marked as allocated in the
master file table (MFT) bitmap.
CHKDSK discovered free space marked as allocated in the volume bitmap.
Windows has made corrections to the file system.

976760000 KB total disk space.
81785452 KB in 237839 files.
170928 KB in 39598 indexes.
1072 KB in bad sectors.
486472 KB in use by the system.
65536 KB occupied by the log file.
894316076 KB available on disk.

4096 bytes in each allocation unit.
244190000 total allocation units on disk.
223579019 allocation units available on disk.

Internal Info:
00 5e 05 00 c9 3b 04 00 26 39 08 00 00 00 00 00 .^...;..&9......
64 07 00 00 5e 00 00 00 00 00 00 00 00 00 00 00 d...^...........
48 5c 23 00 50 01 21 00 00 1a 21 00 00 00 21 00 H\#.P.!...!...!.

Windows has finished checking your disk.
Please wait while your computer restarts.

Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Wininit" Guid="{206f6dea-d3c5-4d10-bc72-989f03c8b84b}" EventSourceName="Wininit" />
<EventID Qualifiers="16384">1001</EventID>
<Version>0</Version>
<Level>4</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-11-26T04:54:31.000000000Z" />
<EventRecordID>3805</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>L22-PC</Computer>
<Security />
</System>
<EventData>
<Data>

Checking file system on C:
The type of the file system is NTFS.

A disk check has been scheduled.
Windows will now check the disk.

CHKDSK is verifying files (stage 1 of 5)...
351744 file records processed.

File verification completed.
889 large file records processed.

0 bad file records processed.

0 EA records processed.

94 reparse records processed.

CHKDSK is verifying indexes (stage 2 of 5)...
430936 index entries processed.

Index verification completed.
0 unindexed files scanned.

0 unindexed files recovered.

CHKDSK is verifying security descriptors (stage 3 of 5)...
351744 file SDs/SIDs processed.

Cleaning up 2062 unused index entries from index $SII of file 0x9.
Cleaning up 2062 unused index entries from index $SDH of file 0x9.
Cleaning up 2062 unused security descriptors.
Security descriptor verification completed.
39597 data files processed.

CHKDSK is verifying Usn Journal...
36125008 USN bytes processed.

Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
Read failure with status 0xc000009c at offset 0x78d1fa8000 for 0x10000 bytes.
Read failure with status 0xc000009c at offset 0x78d1fb5000 for 0x1000 bytes.
Windows replaced bad clusters in file 168848
of name \Windows\System32\config\software.
351728 files processed.

File data verification completed.
CHKDSK is verifying free space (stage 5 of 5)...
223579285 free clusters processed.

Free space verification is complete.
Adding 268 bad clusters to the Bad Clusters File.
CHKDSK discovered free space marked as allocated in the
master file table (MFT) bitmap.
CHKDSK discovered free space marked as allocated in the volume bitmap.
Windows has made corrections to the file system.

976760000 KB total disk space.
81785452 KB in 237839 files.
170928 KB in 39598 indexes.
1072 KB in bad sectors.
486472 KB in use by the system.
65536 KB occupied by the log file.
894316076 KB available on disk.

4096 bytes in each allocation unit.
244190000 total allocation units on disk.
223579019 allocation units available on disk.

Internal Info:
00 5e 05 00 c9 3b 04 00 26 39 08 00 00 00 00 00 .^...;..&amp;9......
64 07 00 00 5e 00 00 00 00 00 00 00 00 00 00 00 d...^...........
48 5c 23 00 50 01 21 00 00 1a 21 00 00 00 21 00 H\#.P.!...!...!.

Windows has finished checking your disk.
Please wait while your computer restarts.
</Data>
</EventData>
</Event>
My System SpecsSystem Spec
26 Nov 2015   #27
axe0

Windows 10 Pro
 
 

Backup your data a.s.a.p. and replace the hard drive.
My System SpecsSystem Spec
Reply

 BSOD New installation - windows updates




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Are Fault Buckets normal during Windows Updates installation?
I just reinstalled Windows 7 Pro (x64) and installed over 200 Windows Updates. I installed the Windows Updates by category, when possible, (SP1 Update 1st, Security Updates 2nd, Windows 7 Updates 3rd, etc.), maybe 20 at a time. I wanted to install them by Release Date order, but I had trouble...
Windows Updates & Activation
Windows Check for updates keeps running-all installation/updates fail
I have never posted on a forum before so apologies if I am doing this wrong. The problem started when I tried to plug in my (new) iphone to my Dell pc. The device was not detected so I tried to update my itunes software - update failed and I received a Windows 7 error. After searching through...
Windows Updates & Activation
Add more windows updates to a windows installation disc
Is it possible to update the updates that are on a windows 7 installation disk? I am asking because everytime i reinstall it using that disk i have to install +400 updates which are about 3gb,and with a not very fast internet its a very long process. If it is possible,how?
Windows Updates & Activation
Three Windows Security Updates continue to fail installation
I recently had to rebuild the Window 7 Home Premium X64 on my Gateway NV59 laptop. I used the recovery CDs from Gateway to do this. So all I currently have is the OS and applications that were reinstalled from these CDs except the Norton Antivirus which I uninstalled since I use McAfee. I have...
Windows Updates & Activation
Windows 7 64B installation stuck on "Installing updates"
I installed an ocz vertex 4 ssd (256g model) into my msi gt70 laptop. A product key came with the laptop, and I've burned windows 7 to a disc. I made sure the ssd has priority in the BIOS too. When I start up the installation, it gets to the "Installing updates" step, but doesn't progress any...
Installation & Setup
Windows 7 Home: Stop automatic installation of updates on shut down
Windows XP used to give you the option to shut down your PC without installing Windows updates or to choose to shut it down and install updates,but this feature seems to be missing in Windows 7. One of my PC's runs Windows 7 Professional and it also comes with the Group policy Editor...
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:29.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App