Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Bsod 1-3 times a day,for years, usually when browsing or playing vids

13 Nov 2015   #1
Biostar

Win 7 Ultimate 32bit
 
 
Bsod 1-3 times a day,for years, usually when browsing or playing vids

I've tried everything to fix this motherboard/cpu over the years. Switched out every other piece of hardware in the box at one time or another. Tried different video cards, power supplies, Drives, updated Mboard bios, drivers, yada yada. Any help will be greatly appreciated. Thanks

attached is the zip file of log stuff

BiostarTA785
Athlon II X4 3.0 ghz
4GB microcenter ddr2 1066
ATI Radeon HD 4300/4500 Series

Win 7 Ultimate 32bit
Chrome/Firefox/AVG


My System SpecsSystem Spec
.
13 Nov 2015   #2
axe0

Windows 10 Pro
 
 

Requested to run the DM Log Collector tool again, there are some files missing.
Please check the content of the zip before uploading
It should at least contain
  • 18 .txt,
  • 1 .nfo files

If this is not the case after re-running the tool, try booting in safe mode and run the tool againn
My System SpecsSystem Spec
13 Nov 2015   #3
Biostar

Win 7 Ultimate 32bit
 
 
new DM log collector file here

Here is the correct files, hopefully.
My System SpecsSystem Spec
.

13 Nov 2015   #4
axe0

Windows 10 Pro
 
 

According to the dumps from this month: memory problems are most occuring, second are network drivers and last graphics drivers.
A 0xBE(ATTEMPTED_WRITE_TO_READONLY_MEMORY) is mostly caused by drivers or bad memory.
Same with 0x4E(PFN_LIST_CORRUPT)

As some others also show memory issues
This one shows a write error probably caused by NETIO.sys which points to the network drivers as it is the Network Input/Output System driver from Windows.
Code:
Probably caused by : NETIO.SYS
Processing initial command '!analyze -v; !thread; !sysinfo machineid; !sysinfo cpuspeed; .bugcheck; .time'
 ( NETIO!NsiEnumerateObjectsAllParametersEx+187 )

Followup: MachineOwner
---------

3: kd> !analyze -v; !thread; !sysinfo machineid; !sysinfo cpuspeed; .bugcheck; .time
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0501062f, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000001, bitfield :
	bit 0 : value 0 = read operation, 1 = write operation
	bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: 82eb6059, address which referenced memory
This one almost the same, except that it is a read error.
Code:
Probably caused by : NETIO.SYS ( NETIO!NsiEnumerateObjectsAllParametersEx+187 )

Followup: MachineOwner
---------

Processing initial command '!analyze -v; !thread; !sysinfo machineid; !sysinfo cpuspeed; .bugcheck; .time'
0: kd> !analyze -v; !thread; !sysinfo machineid; !sysinfo cpuspeed; .bugcheck; .time
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 00000008, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000000, bitfield :
	bit 0 : value 0 = read operation, 1 = write operation
	bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: 82ed9011, address which referenced memory
Then finally an ethernet driver being flagged, although due to a read error.
Code:
*** WARNING: Unable to verify timestamp for Rt86win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt86win7.sys
Probably caused by : Rt86win7.sys ( Rt86win7+ce8a )

Followup: Processing initial command '!analyze -v; !thread; !sysinfo machineid; !sysinfo cpuspeed; .bugcheck; .time'
MachineOwner
---------

3: kd> !analyze -v; !thread; !sysinfo machineid; !sysinfo cpuspeed; .bugcheck; .time
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 00000014, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000000, value 0 = read operation, 1 = write operation
Arg4: 8bee32bf, address which referenced memory

3: kd> lmvm Rt86win7
start    end        module name
91e60000 91e85000   Rt86win7 T (no symbols)           
    Loaded symbol image file: Rt86win7.sys
    Image path: \SystemRoot\system32\DRIVERS\Rt86win7.sys
    Image name: Rt86win7.sys
    Timestamp:        Thu Feb 26 10:04:22 2009 (49A65B16)
    CheckSum:         0002BDEF
    ImageSize:        00025000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Last there is a 0x119(VIDEO_SCHEDULER_INTERNAL_ERROR) which points to the graphics drivers as we can see
Code:
1: kd> k
ChildEBP RetAddr  
8d167c48 8c2d6276 nt!KeBugCheckEx+0x1e
8d167c70 9234095a watchdog!WdLogEvent5+0xc6
8d167c88 923409a1 dxgmms1!VidSchiCheckConditionDeviceCommand+0x7a
8d167ca4 92344d3f dxgmms1!VidSchiCheckPendingDeviceCommand+0x33
8d167cf0 92344d77 dxgmms1!VidSchiProcessCompletedQueuePacketInternal+0x485
8d167cfc 9236a329 dxgmms1!VidSchiProcessCompletedQueuePacket+0xd
8d167d18 9236b2c7 dxgmms1!VidSchiSubmitDeviceCommand+0x45
8d167d28 9236b516 dxgmms1!VidSchiSubmitQueueCommand+0xaf
8d167d3c 9236b5bd dxgmms1!VidSchiRun_PriorityTable+0x24
8d167d50 8301dfdf dxgmms1!VidSchiWorkerThread+0x7f
8d167d90 82ec4699 nt!PspSystemThreadStartup+0x9e
00000000 00000000 nt!KiThreadStartup+0x19
1: kd> lmvm atikmpag
start    end        module name
92235000 92281000   atikmpag   (deferred)             
    Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
    Image name: atikmpag.sys
    Timestamp:        Tue Apr 30 04:47:51 2013 (517F30D7)
    CheckSum:         000546A3
    ImageSize:        0004C000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
My suggestions:
Run MemTest86+ to test the memory, update the network drivers and update AMD drivers.
Please follow instructions below.

Please update your Realtek ethernet driver
Driver Reference Table - Rt86win7.sys

Please uninstall everything of AMD using Display Driver Uninstaller and install new drivers from AMD. Please ONLY install the drivers, via custom/advanced options.




Bsod 1-3 times a day,for years, usually when browsing or playing vids Diagnostic Test Bsod 1-3 times a day,for years, usually when browsing or playing vids
 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums

Note   Note


MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
My System SpecsSystem Spec
Reply

 Bsod 1-3 times a day,for years, usually when browsing or playing vids




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD playing SWTOR and watching vids
Hello there. Yesterday for the first time I got the BSOD and have been scrabbling to find a solution. I cam across this forum and followed the instructions for the posting info. I hope that someone will be able to give me a hand. It started with me playing the SWTOR. all of a sudden the screen...
BSOD Help and Support
bsod at various times browsing or playing games
Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1033 Additional information about the problem: BCCode: 1e BCP1: FFFFFFFFC0000005 BCP2: FFFFF80002E7EAC5 BCP3: 0000000000000000 BCP4: FFFFFFFFFFFFFFFF
BSOD Help and Support
BSOD random times (more frequent when browsing playing music)
Hello I hope you can help me solving this problem. + Win Updates can't be found anymore
BSOD Help and Support
BSOD at seemingly random times. Often when web browsing/playing games.
Hi, I'm new to the forums as a poster, but often find solutions here (thank you). I've been having issues with my computer for a while now, it crashes at unpredictable times. I believe the crashes started about the same time I installed my current video card. Any advice would be much appreciated.
BSOD Help and Support
BSOD at all times watching vids browsing the internet
I have been having this problem for some time but lately it is getting worse crashing 4-5 times a day and 3 times in the last hour. i hope i have uploaded the right files. Thanks for your help.
BSOD Help and Support
Random BSOD's, most prominently when browsing internet & playing vids
Hello i have been experiencing BSOD's now for about a month maybe more, As per the instructions, heres all i know: Windows 7 (64 bit) Original OEM OS installed Hardware age September 2010 OS Installed September 2010 *Note: i tried to follow this thread...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:46.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App