Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: STOP 50/0A/D1/3B/FC/1A in a few days.

28 Nov 2015   #11
mrnyne

Win 7 64 bit
 
 

I called Dell/Alienware about a recovery DVD and he recommended that I do this first. Never heard about this program. It runs from the BIOS


My System SpecsSystem Spec
.
28 Nov 2015   #12
Laith

Windows 10 Professional x64
 
 

Yes do run that on all harddrives.
My System SpecsSystem Spec
28 Nov 2015   #13
mrnyne

Win 7 64 bit
 
 

Hmmm my PC had 2 blue screens today as well.. what is happening. Can you check what it might be...
My System SpecsSystem Spec
.

29 Nov 2015   #14
Laith

Windows 10 Professional x64
 
 

Have you run the test?
Code:
BugCheck D1, {8d38000, 2, 1, fffff88004a7e454}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : hardware ( nvlddmkm+20a454 )
This one blames it on the graphics driver.

Run Display Driver Uninstaller(DDU)
Make sure you tick the Uninstall C:/AMD and C:/NIVIDA folders while you are in DDU when you are done running DDU install your graphics driver again. This is the guide for DDU: Display Driver Uninstaller: How to use
My System SpecsSystem Spec
29 Nov 2015   #15
mrnyne

Win 7 64 bit
 
 

I will try that, my friend is away for the weekend. He will try the hardware test again tomorrow
My System SpecsSystem Spec
29 Nov 2015   #16
mrnyne

Win 7 64 bit
 
 

I ran the test and it gave me no errors. Have you heard about a program called ioBit driver booster. It says I have 62 outdated system drivers. Should I update them or just leave it alone? Stumbled on this program while cleaning registry using advanced systemcare 9.
My System SpecsSystem Spec
29 Nov 2015   #17
axe0

Windows 10 Pro
 
 

warning   Warning
Programs that claim to update your drivers install either the wrong or corrupted drivers.
If you install any driver with such programs, it'll only cause harm!
My System SpecsSystem Spec
30 Nov 2015   #18
mrnyne

Win 7 64 bit
 
 

Gonna reinstall win 7 and maybe upgrade to win 10... Wish me luck.
My System SpecsSystem Spec
30 Nov 2015   #19
mrnyne

Win 7 64 bit
 
 

ok I had another BSOD after starating my PC. Can you have a look at it. Just wanna be sure it's not hardware related before reinstalling. Only thing I can remember changing is that I got a new mouse. Can it be that? I have gotten a Razer naga Hex mouse and my friend has the same. I uninstalled all Razer software though already. Read somewhere that Rzer softtware can give BSOD sometimes.
My System SpecsSystem Spec
01 Dec 2015   #20
axe0

Windows 10 Pro
 
 

Before we proceed, you need to cleanup your system of bypasses/cracks.
Any bypass/crack is against the rules and makes troubleshooting difficult.

Code:
127.0.0.1 lmlicenses.wip4.adobe.com
127.0.0.1 lm.licenses.adobe.com
127.0.0.1 na1r.services.adobe.com
127.0.0.1 hlrcv.stage.adobe.com
127.0.0.1 practivate.adobe.com 
127.0.0.1 activate.adobe.com
Forum rules
Quote:
4) No piracy or discussion of piracy allowed at all. Such as software, music, videos and other intellectual property violations (e.g. downloading youtube videos locally etc).
My System SpecsSystem Spec
Reply

 STOP 50/0A/D1/3B/FC/1A in a few days.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Troubleshooting stop 0x7B and stop 0xED.
As Carrona.org says: STOP 0x0000007B: INACCESSIBLE_BOOT_DEVICE Usual causes: Hard drive, File system, Boot sequence errors, Device driver, and Virus infection (in particular check the MBR) STOP 0x000000ED: UNMOUNTABLE_BOOT_VOLUME Usual causes: Hard drive problem, File system...
Crash and lockup debug 'How To'
BSOD Stop 0x00000101 and Stop 0x0000009c
I have been getting some pretty bad blue screens lately the first one started out as the "Stop 0x00000101 "A clock interrupt was not received on a secondary processor within the allocated time interval" BSOD but then I stopped receiving those and started getting "machine_check_exception__Stop:...
BSOD Help and Support
BSOD random stop : stop 0x0000007A
I have bluescreen with that stop 0x0000007A (0x0000000000000020, 0xFFFFFFFFc000009D, 0xFFFFFFFFA8007CEF7C8, 0x0000000000000000) It happens randomly after sometime half an hour one hour whatever i'm doing on my computer. Do you have any solution to solve this problem. Thanks windows7 64 bit...
BSOD Help and Support
BSOD randomly STOP: 0x0000003B & STOP: 0X00000024
Hello i have had 2 BSOD's or more recently. I dont know why, i only saw 2 of them, but ive had around 3 - 4, the other 1 - 2 were seen by family members but they just turned the pc off and back on... anyhow here are some pictures ...
BSOD Help and Support
BSOD STOP: 0x3B atikmdag.sys/STOP: 0x7E dxgmms1.sys
Guys I'm at a loss I'm getting BSOD's all the time I really don't know what to do with it, and I'm not computer heavy so. If someone here could help me that would be appreciated. I've included a Dxdiag file with the rest.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:06.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App