Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD when connecting SD card from trail cam

26 Dec 2015   #1
Markus2015

Win 7 pro x64
 
 
BSOD when connecting SD card from trail cam

Hi W7 forum people,

Here is my story,
I was connecting my sd card from new trail camera and the disk would now connect or at least the explorer would not recognize it. I use a Lexar card reader. I tried to restart computer but it just got stuck with the timer wheel circling. The computer would not shut down after several minutes so I decided to hold the power button down.

When it restarted I got the BSOD, but didn't catch the code, only that it was shutting off to prevent damage to computer components. I trying a couples times to restart but there was no bios or anything, just a blank screen at this point. I didn't know if the whole computer failed or what. I put this computer together with the support of a friend. I decided to use my startup repair software, I did a restore. Everything checked out successful and all error codes shown were 0x0. I shut down computer again to connect the remaining devices.

I would like to know what to do now since I checked and ran Startup Repair software? Is there some log file to check to see why I got the BSOD. If so, where might it be located? I also use or installed XP mode, not sure if that matters.

Thank you for your help.
Regards Mark H. U.


My System SpecsSystem Spec
.
26 Dec 2015   #2
Baddog22556

Windows 7
 
 

You can probably find it in the Event Viewer. (What information appears in event logs.)
At Windows 7 start menu type in event viewer and execute. Or like it says in link above.
My System SpecsSystem Spec
27 Dec 2015   #3
Markus2015

Win 7 pro x64
 
 

Hello Baddog22556,
Thanks for pointing me to the EV.
The windows system logs show several warnings on Dec 24 related to wpad.gateway.mts.net timed out, NtpClient was unable to set a manual peer to use as a time source because of DNS resolution error.

On the 26th there were a few errors such as Service Control Manager 7023 None "The Intel(R) HD Graphics Control Panel Service service terminated with the following error: %%-2147467259" & The Garmin Core Update Service service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion."

And one Critical Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Probably me shutting down.

I dont see anything that is really bad but I dont have any experience here.

What do you think?

regards Mark H. U.
My System SpecsSystem Spec
.

28 Dec 2015   #4
axe0

Windows 10 Pro
 
 

My System SpecsSystem Spec
29 Dec 2015   #5
Markus2015

Win 7 pro x64
 
 

Hi
I got your message and ran the bsod posting instructions, here is the zip file. I hope it can help.
Thanx for your help (Bedankt voor je hulp).
Mark
My System SpecsSystem Spec
29 Dec 2015   #6
axe0

Windows 10 Pro
 
 

The last BSOD was 4 months back, you're sure you had a BSOD?
My System SpecsSystem Spec
29 Dec 2015   #7
Markus2015

Win 7 pro x64
 
 
BSOD error

Hi ,
Well what I got was blue screen with text on and the computer said some thing about shutting down as to not damage components or something like that.
I was unable to make note of it and then it was gone.

If you said maybe it wasn't , thats ok too as I have no experience in this area.
What file did you find your info in?

regards Mark
My System SpecsSystem Spec
29 Dec 2015   #8
axe0

Windows 10 Pro
 
 

eventlogs.txt, the file that contains the logs of the system.

Please keep your phone or camera close to it and try to make a picture of the crash whenever it occurs.
Make sure the dump settings are proper for you to get a photo of it.
Dump Files - Configure Windows to Create on BSOD
In the startup and recovery, uncheck 'Automatically restart'
My System SpecsSystem Spec
30 Dec 2015   #9
Markus2015

Win 7 pro x64
 
 

Hi,
I set up as you suggested and set the area under "Write debugging info" to Small memory dump.
Is that ok? as the link had a number of selections.

Also, would it also be a good idea to set up Elevated Command Prompt Shortcut?

regards Mark.
My System SpecsSystem Spec
30 Dec 2015   #10
axe0

Windows 10 Pro
 
 

I only wanted you to uncheck the 'Automatically restart' option, the rest is with the tutorial.
Is that option unchecked?

For what would you want to create an command prompt shortcut?
My System SpecsSystem Spec
Reply

 BSOD when connecting SD card from trail cam




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Wireless Card Not Connecting on HP All In One PC.
Hi guys, I have a problem with my HP All-In-One 200 Computer. I can't seem to access my WiFi at home around 2 days ago. Before this problem, i still can access the wifi. So... I went to the device manager to find my wifi card. But there isn't any card listed there, just one for the cable....
Network & Sharing
Built a desktop, monitor isn't connecting to video card
I just finished putting together a new desktop, specs: Intel Core i5-3570K Cooler Master Hyper 212 Plus ASRock Z77 Pro4 ATX LGA1155 Kingston Blu 8GB (2x4GB) DDR3-1600 Seagate Barracuda 1TB 3.5″ 7200RPM XFX Radeon HD 7870 2GB and the monitor (LG Flatron E2442TC) is not connecting to the...
Hardware & Devices
Connecting Front Panel Audio to Sound Card
I have a front audio panel and a CMI 8738-6ch sound card. The front audio does not work and has a wire coming directly from the back of it with this plug on the end of it... https://lh6.googleusercontent.com/-qn5Chte32nY/T3C78xg6Q9I/AAAAAAAAAIw/Kf0MPEnaTp8/s512/20120326_194826.jpg There are...
Sound & Audio
BSOD on connecting to data card internet
I have a relatively new laptop. But from the last few days I have got the blue screen at least once a day. Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.768.2 Locale ID: 16393 Additional information about the problem: BCCode: 1000007e ...
BSOD Help and Support
Connecting Monitor To Card
I just got my first graphics card and i have to ask a really nooby question... The card didn't come with a dvi vga adapter and do i need one to use the graphics card with the monitor?
Graphic Cards
Mouse Trail?
anyone know how make mouse trails ? maybe in photoshop ? ( : i would like to have a kind of fire trail after where my mouse have been. or maybe just website? i have been looking for a couple of hours now .. and didn find anything ( :
Themes and Styles


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:24.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App