Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD with all parameters

13 Jan 2016   #1
johnyb98

Windows 7 Ultimate 32bit
 
 
BSOD with all parameters

Good evening.

I have a Windows 7 system, that cannot reach desktop.
After the Windows 7 flag is created from the four colors coming from depth, then a blank black screen as it is normal, and then, as I wait for the desktop, here comes the hot restart. And this cycle restart again, and again, and again, etc. etc.

System has two identical WD SATA 500GB each, in a RAID 1 row (mirroring).

Have tried from F8 make the repair:no result
Have tried chkdsk /r:no result

Error on BSOD is:
UNMOUNTABLE_BOOT_VOLUME
0x000000ED (0xFFFFFA8004 98DCD0, 0xFFFFFFFFC00000C0, 0x0000000000000000, 0x0000000000000000)

Could you please help me?

Thank you!


My System SpecsSystem Spec
.
13 Jan 2016   #2
BorisTheAnimal

Windows 7 Home Premium
 
 

Hi there johny.

I would recommend that you run memtest86+:
RAM - Test with Memtest86+

It seems that it might help you resolve the issue!

*Update

Found this:

AMI BIOS:
1 beep - System boot successfull
*1beep - Refresh failure - (NO VIDEO) memory refresh failure (bad memory)
2 beeps - Parity error - bad memory

So you will definitely have to check the ram.

Cheerio /Boris
My System SpecsSystem Spec
14 Jan 2016   #3
johnyb98

Windows 7 Ultimate 32bit
 
 

You are totally right, Boris. In this desktop, the last six months, many times NO VIDEO in screen at start up. So, tried with turn on and off screen, to have image. I thought of all possibilities:
screen itself
screen cable
VGA to DVI adapter
VGA card

But never thought of RAM. If I have understood well enough, maybe a failure RAM is the NO VIDEO result. Right?

So, now I have started checking RAM. And I will upload results when finish.
Something strange, now. Something that I have never seen in other Memtest86+ checking I have made before is as follows:when Memtest86+ starts, I hear two short beeps:beep-beep. But, no errors in error column. Maybe because it has two modules A-DATA and two Transcened. Each one of 1024MB. So, 4GB of total RAM.
What about all that?

Thanks!
My System SpecsSystem Spec
.

14 Jan 2016   #4
Pauly

Win7 Ultimate X64
 
 

An 0xED BSOD as you mention is an unmountable boot volume which can be very problematic to diagnose as you cannot access windows to retrieve dump/diagnostic files, one of our top BSOD guys has done a thread for just this type of scenario have a read through it will give you some ideas of things you can do/things to try but as you are running a raid setup that will complicate things

Troubleshooting stop 0x7B and stop 0xED.
My System SpecsSystem Spec
14 Jan 2016   #5
BorisTheAnimal

Windows 7 Home Premium
 
 

Well johny just like Pauly said because of that you cannot get into Windows will make solving this problem more tedious than normally.

Would you be able to get some information on your hardware? Like if we can get the motherboard model we can check the QVL if any of your sticks are actually supported, if either of them aren't well then.
My System SpecsSystem Spec
14 Jan 2016   #6
johnyb98

Windows 7 Ultimate 32bit
 
 

Well, motherboard is a GIGABYTE GA-890XA-UD3.
My System SpecsSystem Spec
14 Jan 2016   #7
BorisTheAnimal

Windows 7 Home Premium
 
 

Quote   Quote: Originally Posted by johnyb98 View Post
Well, motherboard is a GIGABYTE GA-890XA-UD3.
Have you tried taking out both Transcend sticks and vice versa and try booting?
My System SpecsSystem Spec
14 Jan 2016   #8
johnyb98

Windows 7 Ultimate 32bit
 
 

No. I haven't. Do you suggest so? Do you believe this could solve 0xED problem?

I believe that, even if Transcened or A-DATA RAM is defective, even by letting on motherboard only healthy modules, is too late. Because now, some or many necessary Windows boot files are destroyed. Something that will not be fixed with just healthy modules on motherboard.

What do you think about that?
My System SpecsSystem Spec
14 Jan 2016   #9
BorisTheAnimal

Windows 7 Home Premium
 
 

Well I would then suggest that you do option number 6 in the thread that Pauly mentioned.

My thinking of the memory was just a thought.

Like I said without anything to go on this problem could be caused by really whatever.
My System SpecsSystem Spec
15 Jan 2016   #10
Pauly

Win7 Ultimate X64
 
 

I would start with a HDD diagnostic check using Seagate seatools software or similar, you can make a bootable flash drive to run it off so windows will not come into it.
If drive checks out ok then you can start looking at boot files etc
My System SpecsSystem Spec
Reply

 BSOD with all parameters




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Persistent BSOD, Varying Parameters Usually During Gaming Applications
Hi All, I've gotten random BSOD for nearly a month now, and I've tried many of the usual suspects with no resolution. I come now to the collective seeking wisdom. Things I've tried thus far with no success (not necessarily in this order); 1. Memtest86. No errors 2. Chkdsk /F No errors 3....
BSOD Help and Support
BSOD 0c4, parameters 0x91, 0x02, x fffff800`03011c40, 0x00 ntoskrnl.ex
Hi there, I have tried for 2 days to troubleshoot this bugger and i am about 100% defeated Ive made a fresh install of OS, installed chipset and all the drivers, updated windows I have tried Driver verifier for advanced troubleshooting, but it simply wont make the dumpfile with verifier on,...
BSOD Help and Support
BSOD after login, Unknow BugcheckL Bugcheck be. Parameters~~
Hi, lately I have been having BSOD every after logins, but never occurs again when i restart it immediately every after having the BSOD. The BSOD only occurs after I login like in a long time like after school or after work. I didnt install Anything aside games, legally acquired games. But one...
BSOD Help and Support
Invalid Parameters
Hmmm, ran CMD.exe as administrator, copied and pasted "powercfg -lastwake" after C:\Users\bert> and got an immediate "Invalid Parameters -- try "/?" for help. Didn't even get a chance to hit the enter key after lastwake. Tried it a few more times. Nothing. Typing /? gets me '/?' is not...
Performance & Maintenance
Incorrect parameters, please try again later
I just bought a TOSHIBA L-500 (it was my birthday :P ) And i install the updates, but when i want to go to Youtube i get this error '' Incorrect parameters, please try again later'' whats the problem My bit system is x64 (sorry if in wrong section :'( )
Browsers & Mail
Unable to set network parameters
Hello everyone, I have a weird problem when I want to enter my IPs parameters. In the "Network Lan Properties" of my network card, when I select "Internet Protocol Version 4 (TCP/IPV4)" the button "Properties" is disable thus I can't enter the IP address, Netmask and Gateway. I tried to...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:21.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App