BSOD 7a done everything that was written on every thread


  1. Posts : 4
    windows 7 ultimate 64 bit service pack 1
       #1

    BSOD 7a done everything that was written on every thread


    sometimes its f4 happens every tie i boot the computer

    done every test
    no errors
    new pc just bought
    i have ssd 120 gb and hdd 500 gb

    dump files attached plz help
    Last edited by blade1234; 18 Jan 2016 at 08:07.
      My Computer


  2. Posts : 1,436
    Windows 7 Home Premium
       #2

    Hi blade and welcome to Sevenforums! :)

    First things first, please update your Specs. Please follow this tutorial as it might be the easiest way:
    System Info - See Your System Specs

    Filling out your system specs will help us narrow down your error, for example on your profile it says that your motherboard is an Asus but looking at the info from the dmp files tells us it is a Gigabyte B85M-Gaming 3.

    There is an update for your BIOS I would recommend that you visit Gigabyte Support (<- click the text) and download and install it as it might help with your issue.

    BSOD 0x7A KERNEL_DATA_INPAGE_ERROR is storage related. What this error means, system having difficulty to read or write to the Pagefile located on the hard drive. Failing HDD, defective cabling, outdated storage controller driver etc are the main reason behind this BSOD. Although not common, Rootkit infections are also known to cause this BSOD.

    Please try the below steps.

    1. Change SATA data cable and reset the power cable.



    Make sure the cable you are using is a high quality SATA 6GB/s one. Standard 3Gb/s cable may create problem with SSD drives.

    2. If that didn't helps, switch the SATA port used to connect the SSD.

    I would also suggest doing a full surface test using the trial version of HDTunePro.

    HD Tune website




    3. Additionally scan for any Rootkits in the system using the below tools.

    Kaspersky TDSS Killer : TDSSKiller Download

    Malwarebytes Antirootkit : Malwarebytes Anti-Rootkit Download

    You might need to disable AVG when either above run.

    Cheers! /Boris :)
      My Computer


  3. Posts : 4
    windows 7 ultimate 64 bit service pack 1
    Thread Starter
       #3

    how to reset power cable?
    in health section of hd tune pro there is an error in ssd:
    sata downshift error count :failed
    so whats that
    thx
      My Computer


  4. Posts : 7,050
    Windows 10 Pro
       #4

    Please post a screenshot of the health section.

    Sata downshift error count is an important attribute of S.M.A.R.T. as it indicates the total number of data blocks with detected, uncorrectable errors encountered during normal operation
      My Computer


  5. Posts : 4
    windows 7 ultimate 64 bit service pack 1
    Thread Starter
       #5

    done.
      My Computer


  6. Posts : 19,383
    Windows 10 Pro x64 ; Xubuntu x64
       #6

    0x7A and 0xF4 combinations are usually indicative of a failing disk. Together with the HDTune assessment, I'd say its time to replace it.
      My Computer


  7. Posts : 4
    windows 7 ultimate 64 bit service pack 1
    Thread Starter
       #7

    but i just bought it 1 0r 2 week back
      My Computer


  8. Posts : 7,050
    Windows 10 Pro
       #8

    RMA it, it is faulty.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 22:07.
Find Us