Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Crash after 1st boot then okay upon restart

15 Nov 2009   #1
pbradley

Microsoft Windows 7 Home Premium
 
 
Crash after 1st boot then okay upon restart

My system crashes after the first startup of the day, usually less than 15 minutes of running. It can crash in three different ways, system freeze, system just shuts down or BSOD memory dump. The wrinkle here is that, after I boot it back up, I have no further problems. The system runs fine. So far, I cannot narrow it down to any application, or driver. I did update my mouse driver, but the system can crash if it just sits there. If I walk away it will die in a short while. I had the same problem when running Vista Home Premium and it followed me when I upgraded through the HP upgrade offer. I don't get a lot from event viewer, but here is the one thing I could find. I've attached my system info; thanks for your time.

Log Name: Application
Source: Microsoft-Windows-WMI
Date: 11/15/2009 11:05:31 AM
Event ID: 10
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: The_Beast
Description:
Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WMI" Guid="{1edeee53-0afe-4609-b846-d8c0b2075b1f}" EventSourceName="WinMgmt" />
<EventID Qualifiers="49152">10</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-11-15T16:05:31.000000000Z" />
<EventRecordID>7321</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>The_Beast</Computer>
<Security />
</System>
<EventData>
<Data>//./root/CIMV2</Data>
<Data>SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage &gt; 99</Data>
<Data>0x80041003</Data>
</EventData>
</Event>


My System SpecsSystem Spec
15 Nov 2009   #2
smackheadz

windows 7 home premium 64bit
 
 

Quote   Quote: Originally Posted by pbradley View Post
My system crashes after the first startup of the day, usually less than 15 minutes of running. It can crash in three different ways, system freeze, system just shuts down or BSOD memory dump. The wrinkle here is that, after I boot it back up, I have no further problems. The system runs fine. So far, I cannot narrow it down to any application, or driver. I did update my mouse driver, but the system can crash if it just sits there. If I walk away it will die in a short while. I had the same problem when running Vista Home Premium and it followed me when I upgraded through the HP upgrade offer. I don't get a lot from event viewer, but here is the one thing I could find. I've attached my system info; thanks for your time.

Log Name: Application
Source: Microsoft-Windows-WMI
Date: 11/15/2009 11:05:31 AM
Event ID: 10
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: The_Beast
Description:
Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WMI" Guid="{1edeee53-0afe-4609-b846-d8c0b2075b1f}" EventSourceName="WinMgmt" />
<EventID Qualifiers="49152">10</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-11-15T16:05:31.000000000Z" />
<EventRecordID>7321</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>The_Beast</Computer>
<Security />
</System>
<EventData>
<Data>//./root/CIMV2</Data>
<Data>SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage &gt; 99</Data>
<Data>0x80041003</Data>
</EventData>
</Event>
Open a command prompt as an admin and enter the following pressing the enter key after each line:

net stop winmgmt
DEL C:\Windows\System32\wbem\Repository\*.*

Now reboot and let the system idle for a few minutes. There will be a couple of WMI warnings in the event log, but thats alright for the moment. Reboot one more time and the error and warning will hopefully be resolved
My System SpecsSystem Spec
08 Jul 2010   #3
Martin64bit

windows 7 64bit
 
 

Did it help?

I have the very same problem. First boot crashes and the reboot works perfect.

Martin
My System SpecsSystem Spec
10 Jul 2010   #4
pbradley

Microsoft Windows 7 Home Premium
 
 

Thanks for your replies. Basically, the problem is the hardware. I have an HP Pavillion e9180t which has a serious flaw in the build. Most likely, the crashes, BSOD and freezes are all due to a cheap motherboard, from Pegatron. HP says they are looking into it, but all the posts on HP's forum are full of grim reports on this machine. Thousands of customers have been caught by this problem. I have sent my machine back once for a repair and I've rebuilt the operating system from the recovery disks, twice. Until HP can come up with a solution, and who knows when that will be, the best work around is to boot the machine cold, let it come up and after a few minutes do a warm boot, restart.

regards,
My System SpecsSystem Spec
10 Jul 2010   #5
CarlTR6

Windows 7 Ultimate 32 bit
 
 

Thank you for posting this information. It may well help other users.
My System SpecsSystem Spec
Reply

 Crash after 1st boot then okay upon restart




Thread Tools





Similar help and support threads
Thread Forum
Please help with crash and restart
Hei,My name degger from indonesia. I have a problem with crash windows here the code : Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033 Additional information about the problem: BCCode: 34
BSOD Help and Support
BSOD and Crash restart
Gonna past what i got from event viewer. Crashing/restarting randomly watching netflix or playing BattleField bad company 2. BLAH wth Please help Log Name: System Source: Microsoft-Windows-WER-SystemErrorReporting Date: 5/28/2011 2:20:49 AM Event ID: 1001 Task...
BSOD Help and Support
Help! i update and then crash after restart!
Hi! i have all messed up i have three OS in my laptop just for this moment, because i know how windows is, thos ghost form windows 98 xp still there quiet in windows 7 waiting the right moment to crew all the system.... everything its so screw up, that i tryed using the install cd of windows 7...
BSOD Help and Support
Random Crash and Restart
Hi, i just upgraded my system to windows 7 ultimate and increased my screen resolution to 1600 x 900 my monitors recommended resolution. Ever since i upgraded it, my computer will randomly shut down and when it starts back up I get the windows has recovered from an unexpected shut down screen...
BSOD Help and Support
Doesn't crash after restart
With the help of my brother, I built my new system from parts. It seemed to work OK at first, but started having random blue screen crashes on desktop or running browsers (Opera or IE). It seemed to happen mostly when it was idle. Running games worked flawlessly. The crashes came more and more...
BSOD Help and Support
Constant Crash and Restart
Immediately after windows started, which show the desktop, it will crashes that prompt a restart.. some time can see that the ATI CCC cannnot start, also the logitech mouse keyboard setpoint480 cannot start.. using window 7 64 bit, power color 5850, asus P43TD pro... just build the rig.. ...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:48.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App