Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD going to hibernating, etc.

06 Feb 2016   #1
denden

Windows 7 Home Premium 64bit
 
 
BSOD going to hibernating, etc.

Laptop started having BSOD when I try and go into hibernation mode, etc. I think it read something along the lines of "Internal_power_error".

Not sure if i got any dump files complete, as most of the time it would reach 80%+ then turn off on it's own. If you point me in the right direction, I'll try and get a dump file, if someone can help me out. Maybe drivers went out of date, haven't had a problem for years, till now on this laptop. Thanks!


My System SpecsSystem Spec
.
06 Feb 2016   #2
denden

Windows 7 Home Premium 64bit
 
 

Found some dump files that were created when BSOD happened I guess.


Attached Files
File Type: rar dump files.rar (41.4 KB, 3 views)
My System SpecsSystem Spec
07 Feb 2016   #3
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Code:
INTERNAL_POWER_ERROR (a0)
The power policy manager experienced a fatal error.
Arguments:
Arg1: 0000000000000009, A fatal error occured while preparing the hibernate file.
Arg2: ffffffffc000009c, Status code
Arg3: 0000000000000001, Mirroring phase
Arg4: 0000000000000000
Code:
Error code: (NTSTATUS) 0xc000009c (3221225628) - STATUS_DEVICE_DATA_ERROR
Some device is causing a fatal error during hibernation, but the supplied information is not sufficient to infer what that device may be. Please follow the Blue Screen of Death (BSOD) Posting Instructions and post the resulting zip file in your reply post.
My System SpecsSystem Spec
.

07 Feb 2016   #4
denden

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by Arc View Post
Code:
INTERNAL_POWER_ERROR (a0)
The power policy manager experienced a fatal error.
Arguments:
Arg1: 0000000000000009, A fatal error occured while preparing the hibernate file.
Arg2: ffffffffc000009c, Status code
Arg3: 0000000000000001, Mirroring phase
Arg4: 0000000000000000
Code:
Error code: (NTSTATUS) 0xc000009c (3221225628) - STATUS_DEVICE_DATA_ERROR
Some device is causing a fatal error during hibernation, but the supplied information is not sufficient to infer what that device may be. Please follow the Blue Screen of Death (BSOD) Posting Instructions and post the resulting zip file in your reply post.
My bad, haven't been here in a while, I knew i missed something, my bad. Here it is


Attached Files
File Type: zip DENDEN-PC-Sun_02_07_2016__93347_36.zip (1.91 MB, 5 views)
My System SpecsSystem Spec
07 Feb 2016   #5
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features. Then Uninstall the driver from device manager.
  1. Right click on "my computer" icon and click "manage" on the context menu.
  2. It will open the "computer management" window.
  3. Select "Device Manager" in the left pane, It will list all the existing devices up.
  4. Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
  5. Select one Intel device item under it, right click, uninstall.
  6. Continue the process for all Intel items under "IDE ATA/ATAPI controllers"
  7. Now restart the computer. At restart, windows will auto configure the appropriate native system driver.
Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
  1. Click on the Start button
  2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
  3. Select the “Startup” tab.
  4. Deselect all items other than the antivirus.
  5. Apply > OK
  6. Accept then restart.
And, if there is any issue (it seems that there is, but cannot be said with certainty in a remote assistance) with MBAM, resolve it. As the user, you know how to resolve it.
My System SpecsSystem Spec
07 Feb 2016   #6
denden

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by Arc View Post
Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features. Then Uninstall the driver from device manager.
  1. Right click on "my computer" icon and click "manage" on the context menu.
  2. It will open the "computer management" window.
  3. Select "Device Manager" in the left pane, It will list all the existing devices up.
  4. Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
  5. Select one Intel device item under it, right click, uninstall.
  6. Continue the process for all Intel items under "IDE ATA/ATAPI controllers"
  7. Now restart the computer. At restart, windows will auto configure the appropriate native system driver.
Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
  1. Click on the Start button
  2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
  3. Select the “Startup” tab.
  4. Deselect all items other than the antivirus.
  5. Apply > OK
  6. Accept then restart.
And, if there is any issue (it seems that there is, but cannot be said with certainty in a remote assistance) with MBAM, resolve it. As the user, you know how to resolve it.
You think Intel rapid storage driver might be causing BSOD? Haven't had problems with anything up to now. Maybe i need certain drivers to be updated? Also, would uninstalling intel rapid storage affect my pc running correctly?
My System SpecsSystem Spec
08 Feb 2016   #7
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by denden View Post
You think Intel rapid storage driver might be causing BSOD?
The only device driver that failed to load in the dumps is the IRST driver. So there is a fair chance.

Quote   Quote: Originally Posted by denden View Post
Haven't had problems with anything up to now.
Problems start to cause from a particular point of time.

Quote   Quote: Originally Posted by denden View Post
Maybe i need certain drivers to be updated? Also, would uninstalling intel rapid storage affect my pc running correctly?
In AHCI mode, system native driver is more stabler than IRST. Some people say that there might be some performance drop; but I tried it myself and never have seen any visible or noticeable performance drop.
My System SpecsSystem Spec
08 Feb 2016   #8
denden

Windows 7 Home Premium 64bit
 
 

Looks like intel rapid storage was removed form contorl panel, and device manager, and cleared up start up. Will let you know if BSOD still happens. Heard from my bro that it crashed again yesterday, but no minidump of it. Not sure what he did, but looks like the laptop went into hibernation or w.e cuz the laptop looked like it was off, no buttons(power, etc) was on, the fan was on full blast spinning like crazy, then had to turn it off push and hold power button.
My System SpecsSystem Spec
14 Feb 2016   #9
denden

Windows 7 Home Premium 64bit
 
 

Got another BSOD today again. New Dump file is attached. Looking for more solutions.


Attached Files
File Type: zip DENDEN-PC-Sun_02_14_2016_191724_81.zip (1.87 MB, 1 views)
My System SpecsSystem Spec
15 Feb 2016   #10
cluberti

Windows 10 Pro x64
 
 

This one is a directx race condition bug with Intel video chipsets (and your Acer Aspire 4830T is indeed running an Intel video chip), it appears, fixed by KB2870102:
Code:
// Stop 0xA - IRQL_NOT_LESS_OR_EQUAL
// Something tried to access an invalid memory address at IRQL 2 or higher (insta-bugcheck):
0: kd> .bugcheck
Bugcheck code 0000000A
Arguments 00000000`00000000 00000000`00000002 00000000`00000000 fffff800`03091822

// Trap frame showing the site of the bugcheck in the stack:
0: kd> .trap 0xfffff880073968c0
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000002 rbx=0000000000000000 rcx=fffff80003209e80
rdx=fffffa8005cd0d80 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80003091822 rsp=fffff88007396a50 rbp=0000000000000000
 r8=0000000000000000  r9=fffffa80082c8c40 r10=fffffa80082c8c40
r11=fffff88007396ae0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz ac po cy
nt!KiSignalSynchronizationObject+0x42:
fffff800`03091822 488b3f          mov     rdi,qword ptr [rdi] ds:00000000`00000000=????????????????

// Here's where the pagefault occurred (again, page fault in kernel at IRQL2 or higher is insta-bugcheck):
0: kd> k
  *** Stack trace for last set context - .thread/.cxr resets it
 # Child-SP          RetAddr           Call Site
00 fffff880`07396a50 fffff800`0308fbd6 nt!KiSignalSynchronizationObject+0x42
01 fffff880`07396aa0 fffff880`0436347f nt!KeSetEvent+0x106
02 fffff880`07396b10 fffff880`043812e9 dxgmms1!VidMmiProcessTerminationCommand+0x5f
03 fffff880`07396b60 fffff880`04380574 dxgmms1!VidSchiSubmitDeviceCommand+0x39
04 fffff880`07396b90 fffff880`04380012 dxgmms1!VidSchiSubmitQueueCommand+0xb0
05 fffff880`07396bc0 fffff800`03324456 dxgmms1!VidSchiWorkerThread+0xd6
06 fffff880`07396c00 fffff800`0307c2c6 nt!PspSystemThreadStartup+0x5a
07 fffff880`07396c40 00000000`00000000 nt!KxStartSystemThread+0x16

// Running old DirectX binaries for Windows 7 (non-hotfixed):
0: kd> lmvm Dxgkrnl
start             end                 module name
fffff880`04253000 fffff880`04348000   dxgkrnl    (deferred)             
    Mapped memory image file: C:\ProgramData\dbg\sym\dxgkrnl.sys\539E411Cf5000\dxgkrnl.sys
    Image path: \SystemRoot\System32\drivers\dxgkrnl.sys
    Image name: dxgkrnl.sys
    Timestamp:        Sun Jun 15 17:58:04 2014 (539E411C)
    CheckSum:         000FF01E
    ImageSize:        000F5000
    File version:     6.1.7601.18510
    Product version:  6.1.7601.18510
    File flags:       0 (Mask 3F)
    File OS:          40004 NT Win32
    File type:        3.7 Driver
    File date:        00000000.00000000
    Translations:     0409.04b0
    CompanyName:      Microsoft Corporation
    ProductName:      Microsoft® Windows® Operating System
    InternalName:     dxgkrnl.sys
    OriginalFilename: dxgkrnl.sys
    ProductVersion:   6.1.7601.18510
    FileVersion:      6.1.7601.18510 (win7sp1_gdr.140615-1511)
    FileDescription:  DirectX Graphics Kernel
    LegalCopyright:   © Microsoft Corporation. All rights reserved.
Get the hotfix on the box and at least this issue will go away. Can't say much for the other issue you started this thread for, as this seems unrelated.
My System SpecsSystem Spec
Reply

 BSOD going to hibernating, etc.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD when hibernating
Hi all, I got BSOD when hibernating my laptop. It doesn't occur every time though. Around once in every 5-6 times of hibernation. Would be grateful if anyone can help me to debug. :D
BSOD Help and Support
BSOD on hibernating in Windows 7
Hello, I run Windows 7 Home Premium x64 and I'm having BSODs when I put the machine in hibernation or in sleep mode with hybrid sleep activated (the latter means hibernation takes place along with sleep). Mind you I haven't had any other problems with my setup and I can use the sleep function...
BSOD Help and Support
BSOD occasionally when hibernating
Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Additional information about the problem: BCCode: 9f BCP1: 0000000000000003 BCP2: FFFFFA80043C2140 BCP3: FFFFF800046CF4D8
BSOD Help and Support
BSOD when hibernating
Hi, my computer frequently restarts when going into hibernation. I think it may be some sort of driver issue, but honestly I'm just guessing. I hope that you can give me hints on how to fix the problem. Here's the last error: Windows 7 is . . . - x64 - the original installed OS on...
BSOD Help and Support
BSOD (well black) when Hibernating sometimes
Hi Everyone... I often put my computer in Hibernate mode. But sometimes (1 out of 10) it will go “blue screen (well black) of death” instead of hibernate. When I boot it back up (after having to hold down the power button), the "System did not shut down properly" screen comes up. I just select...
BSOD Help and Support
BSOD While computer is Hibernating
I just upgraded my father's computer from Vista 32 to Win7 64 about a week ago. The computer always stays on, so I enabled hibernation. On two occasions now, I have gotten a BSOD while the computer is hibernating; these instances were about 3 days apart. After I got the first BSOD, I made sure...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 17:38.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App