Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD on startup after initial 228 windows update

18 Feb 2016   #1
Cedhuntet

Windows 7 x64
 
 
BSOD on startup after initial 228 windows update

Hey guys, I just received my new gaming pc from a local electronics store. It was going really well and I was happy with it until I did the initial windows update. Aso of now every time my computer tries to configure the updates after installing them it crash and show the error code 0x0000124. I can't get it to even boot. I unplugged and plugged back every piecesingle in it and there's nothing happening it keeps on crashing during the boot. Help me


My System SpecsSystem Spec
.
19 Feb 2016   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

0x124 is mostly a hardware related issue. But any component involved into the environment of the computer may influce this error.

As you are pointing to windows updates, you may try to uninstall the updates and see how it goes.

Boot into Advanced Boot Options > Safe Mode with Command Prompt. Then, follow Windows Update - Uninstall from Console Level in the command prompt. See what happens.

If it problems in Safe Mode too, then be sure that it is a hardware level issue.
My System SpecsSystem Spec
19 Feb 2016   #3
Cedhuntet

Windows 7 x64
 
 

Thanks for the answer, I booted on a previous version (before all the update) and the pc runned fine. I did the update again and it does not crash anymore, so I don't really know what hapened, but thanks for the help.
My System SpecsSystem Spec
.

Reply

 BSOD on startup after initial 228 windows update




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Flicker on win7 initial startup screen
My first build has been problematic to say the least. (at least) one of my two Corsair CMV4GX3M2A1333C9 2GB memory sticks seems faulty as whenever it is in (in any slot - by itself or with the other 2GB stick) it is bsod'ing just after the login screen comes up. Only on cold boot though, when...
BSOD Help and Support
BSOD on initial startup every day.
Hello, I built a new computer in December. Ever since then my computer will Blue screen at a random time after starting for the first time each day. Once it has rebooted from the BSOD it will run fine. I suspect a driver or file is bad as I also have a hard time with some windows updates. ...
BSOD Help and Support
Windows balks on initial desktop startup
Recently I just started getting back into GTA IV. I installed the game on my mechanical drive and it was humming along. This is all assuming that I can actually get the game running. Sometimes it hangs up on the copyright verification. I think the disc is on its last leg aswell... So I installed...
General Discussion
Initial BSOD after powering down during Windows Update
Hi folks, hoping you might be able to help me out as this is causing some frustration. My problem started on the 17th after i inadvertently powered off the laptop during a windows update. I cannot remember if it had already shutdown and i turned off the power or if it was powering up and i...
BSOD Help and Support
BSOD upon initial startup, memory corruption
Hello, I just made a new computer last week and I have been getting BSODs when I first start up my computer. After the BSOD, the computer restarts and acts as normal. I believe it may have to do with me having my window files on an SSD while my users files on an HDD. I did this separation...
BSOD Help and Support
Windows 7 Startup Error Failure To Initial Environment (MFC)
When I start Windows 7 about 30 seconds after the login, I see an error message popping up that says: "Failed to initial environment". In the task bar I see the an icon that writes MFC, which is the program that gives the error message. I looked in my task manager under processes if I see MFC, but...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:29.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App