Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD when using WMC during TV Setup during "Examining TV signal"

26 Feb 2016   #1
CrazyBum

Windows 7 Professional 64-Bit
 
 
BSOD when using WMC during TV Setup during "Examining TV signal"

This has been an ongoing issue when I try to setup my cable cards in Windows Media Center. It downloads the local guide data, then it goes into the "Examining TV Signals" portion of the setup. Sometimes it will just freeze the PC and more commonly, I get a BSOD.

I have two different cards.
1. Hauppauge WinTV HVR‑2255
2. Unsure... Hardware ID: PCI\VEN_1002&DEV_AC00&SUBSYS_B3591002&REV_00

Please help as I am at a total loss.




Attached Files
File Type: zip WARD-64-Fri_02_26_2016_114449_15.zip (1.60 MB, 1 views)
My System SpecsSystem Spec
.
26 Feb 2016   #2
pbcopter

Windows 7 Ultimate x64 SP1, Windows 8.1 Pro x64, Windows 10 Pro x64
 
 

Hi and welcome.

Usually this type of problem is caused by a driver. Do you have the latest drivers installed for your TV cards?
My System SpecsSystem Spec
26 Feb 2016   #3
BorisTheAnimal

Windows 7 Home Premium
 
 

Hi CB,

just as pbcopter said it's usually due to outdated drivers, I looked through your files and your graphic card drivers were quite old, it seems there hasn't been an update done on them since 2013, but no worries here are the latest ones for your card:

Drivers | GeForce

Cheers, Boris
My System SpecsSystem Spec
.

26 Feb 2016   #4
CrazyBum

Windows 7 Professional 64-Bit
 
 

Thanks pbcopter & Borris... I'm not sure which driver update resolved it, but I did both... Thanks for your input!
My System SpecsSystem Spec
26 Feb 2016   #5
pbcopter

Windows 7 Ultimate x64 SP1, Windows 8.1 Pro x64, Windows 10 Pro x64
 
 

You're welcome. Glad to here it was resolved.
My System SpecsSystem Spec
26 Feb 2016   #6
BorisTheAnimal

Windows 7 Home Premium
 
 

No problem mate and you are most welcome, nice to hear you got the problems sorted out!
My System SpecsSystem Spec
Reply

 BSOD when using WMC during TV Setup during "Examining TV signal"




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows 7 Setup Stuck at "Setup is starting..."
last week, my windows 10 upgraded laptop always gets not responding, then i decided to format my laptop and reinstall windows 7, when i was copying my important files to data d, suddenly it crashed then stucks at the start up loading, then i tried to do the automatic repair and just reset it, then...
Installation & Setup
WINDOWS 7 Setup stuck at "setup is starting"
WINDOWS 7 Setup stuck at "setup is starting" in my acer aspire...........and waited for 1 hour and finally went to partition drivers ........ i pressed next and i am stuck at Copying Windows Files (0%)........and finally after half an hour...it came.................."Windows could not format...
Installation & Setup
wireless periodically "No Internet Access", 5 bars EXCELLENT signal
Hello there, I've been having this problem for awhile now, my wireless connection periodically goes :warn: and reads "No Internet Access", despite still be "connected" to my connection, with 5 bars "Excellent" signal. The only quick"fix" I've found helps is "renewing my IP"(ipconfig /renew), and...
Network & Sharing
BSOD after "No HDMI signal"
Hello, first of all i ask you sorry for my bad english. I got a problem while I was gaming and listening some music: monitor got "No HDMI signals" (music keep listening). So I did reset and after some minutes i got a bluescreen (i didn't read it because it disappeared very quickly), then i...
BSOD Help and Support
Wifi signal fine, but getting ( "!" ) error msg and lost connection.
My wifi signal is fine, but I've been getting a yellow ( "!" ) error msg over the wifi icon and losing connection every 5 minutes or so. Some quick background....... (Recently upgraded my dsl speed from ISP provider. Same modem and wifi router, but I did reset them a couple of weeks ago, but the...
Network & Sharing
BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"
Hi everyone! Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:50.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App