Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSoD on startup

27 Mar 2016   #21
crunchie

Windows 7 Pro 64bit
 
 

I have a printer and also a blue tooth head set.


My System SpecsSystem Spec
.
28 Mar 2016   #22
axe0

Windows 10 Pro
 
 

Disable them both while troubleshooting.
My System SpecsSystem Spec
29 Mar 2016   #23
crunchie

Windows 7 Pro 64bit
 
 

Had a BSoD late yesterday.

All startups were disabled (except security programs) and services disabled.

I still had the blue tooth headset and the printer connected though, so they are now disabled.

I also noticed that Samsung Magician was still starting and could not find where to disable it from startup, so that is now uninstalled.
My System SpecsSystem Spec
.

29 Mar 2016   #24
axe0

Windows 10 Pro
 
 

Didn't you realise I meant to disable everything when I asked for disabling all USB devices?
My System SpecsSystem Spec
29 Mar 2016   #25
crunchie

Windows 7 Pro 64bit
 
 

I'm a little slow at times axe0 .

Nothing deliberate, just old age.
My System SpecsSystem Spec
29 Mar 2016   #26
crunchie

Windows 7 Pro 64bit
 
 

Got another crash this morning. PC running about 10 minutes. Only had browser open.

No peripherals other than mouse & keyboard. Services and programs disabled in msconfig, other than security.


Attached Files
File Type: zip STRIX970-Wed_30_03_2016__42318_75.zip (2.50 MB, 2 views)
My System SpecsSystem Spec
29 Mar 2016   #27
axe0

Windows 10 Pro
 
 

Please check in your BIOS the voltage, speed and latency of the memory and let me know what they are.
Please run a memtest and driver verifier afterwards.



BSoD on startup Diagnostic Test BSoD on startup
 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums

Note   Note


MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.



BSoD on startup Diagnostic Test BSoD on startup
 DRIVER VERIFIER

warning   Warning
Please make a backup of your important files and get your rescue media or create one.
Please create a restore point.

Please follow this tutorial to run driver verifier.

Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.

Note   Note
Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.
My System SpecsSystem Spec
29 Mar 2016   #28
crunchie

Windows 7 Pro 64bit
 
 

I have memtest already. Is it just a matter of letting it run? Off to work now, so will do this tonight.

Thanks axe0
My System SpecsSystem Spec
30 Mar 2016   #29
axe0

Windows 10 Pro
 
 

It is just a matter of letting it run, when it is finished make a photo and post it so I can see the result
My System SpecsSystem Spec
30 Mar 2016   #30
crunchie

Windows 7 Pro 64bit
 
 

BIOS info attached.

When you say 'when it (memtest) has finished' I assume you mean after it has done a minimum of 8 passes?


Attached Thumbnails
BSoD on startup-img_0497.jpg   BSoD on startup-img_0498.jpg  
My System SpecsSystem Spec
Reply

 BSoD on startup




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD during windows startup; can't safe mode; startup repair can't fix
Consistent BSOD during Windows startup for both normal mode and safe mode. BSOD problem started shortly after buggy installations of Microsoft Visual C++ 2005 x64, Microsoft .Net Framework 1.1, and AMD Catalyst Drivers 13.9; and turning off Microsoft .Net Framework 3.5.1. Startup Repair is...
BSOD Help and Support
Brief BSOD on Startup, Startup Recovery Hangs
I have Win 7 Home and in the last couple of days I have been trying to do a backup onto an external drive. The problem comes in when I attempt to start my laptop so that I can begin the backup process, the screen flickers a BSOD, says startup failed and do I want to run Startup Recovery. If I say...
BSOD Help and Support
BSOD on startup, unknown error, startup repair running too long
As the title suggests, my Acer Aspire has been running startup repair for over 20 hours following a BSOD yesterday. I'm not sure if it's worth the wait so maybe you all can shed some light. Yesterday I was stressfully trying to search for something (using Chrome) and the website I was on froze;...
BSOD Help and Support
BSOD on Startup - Startup Reapir not working
On Startup, after POST, I get this BSOD: STOP: c000021a {Fatal System Error} The verification of a knownDLL failed. system process terminated unexpectedly with a status of 0xc000012f (0x00360bf0 0x00000000). The system has shut down. Upon Reboot, I am advised to go to the startup repair....
BSOD Help and Support
BSOD at startup, cant repair startup
i had a bsod 3 days ago with no reason when its at Welcome screen and my startup items are not loaded at all(all drivers programs etc.). i tried to reboot and my pc gone wild. it cant even see welcome screen cuz of bsods. also i am having black screens when booting up. sometimes its just freezes...
BSOD Help and Support
BSOD on startup , error 0x000000f4 . startup takes half an hour
so everything was fine when my laptop started to become very slow and i used to get the BSOD very often so i decided to recover the system to the initial state . i did that and everything was fine , then i updated the windows 7 service pack 1 and finished the installation and rebooted my computer ,...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:40.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App