For some time i have had problems with Bsod's.
recently it has gotten worse, and i get them multiple times a day.
A few days ago i installed some windows updates, and it changed the error code from 0x0000007A to 0x000000F4.
I have not been able to get a minidump file as it fails every time.
I have some screenshots attached, with the old and new bsod, but i am clueless to what is causing them.
Any help is appreciated.
Here it is. Are you looking for something specific?
You haven't enabled dumps, please do.
Dump Files - Configure Windows to Create on BSOD
Also snap a picture of the BSOD when it occurs.
I am pretty sure i have enabled minidumps
There are a few things that could cause no dump to be produced, 2 of them are below.
Diagnostic Test
RAM TEST
Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums
Note
MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
Diagnostics Test
HDD TEST
Run following tests
- Short Drive Self Test
- Short generic
- Long generic
If the short generic fails, no need for the long generic.
NoteDo not run SeaTools on an SSD as the results will be invalid.
Disk Check - Windows 7 Help Forums
- scan for errors, no quick scan but full scan
- check the health,
- benchmark.
It may take some time, but please take the time you need to perform it properly.
Let me know what the results are
- of the error scan,
- make a screenshot of the health of every hard drive and post the screenshots,
- post screenshots with the benchmark of the
- transfer rate,
- access time,
- burst rate,
- cpu usage.
Quote