Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD using PCI device, 0x124

18 Jun 2016   #11
axe0

Windows 10 Pro
 
 

A thing to mention, if you get BSODs I need a new zip for analysis to see if there are any patterns or signs that can lead to a solution. We need a complete log, not just dump files, because the other logs may contain data that cannot be missed.

What was the temperature for the GPU when stress tested?


My System SpecsSystem Spec
.
18 Jun 2016   #12
atalanov

Windows 7 Enterprise x64
 
 

The BSODs are still present. Got one earlier today (June 18th) but again a minidump was not generated for some reason; the BSOD paused on initializing disk for crash dump and did not continue (see pic of BSOD). I have attached a new zip of the scan/log (I believe that is what you are referring to).

GPU temps were stable at about 80-81 degrees C, and reached a max of 82 degrees C.


Attached Thumbnails
BSOD using PCI device, 0x124-bsod-6-18-2016.jpg  
Attached Files
File Type: zip Computer-Sat_06_18_2016_150741_23.zip (1.61 MB, 1 views)
My System SpecsSystem Spec
18 Jun 2016   #13
axe0

Windows 10 Pro
 
 

I have a few thoughts with the given description, but it is difficult to confirm anything with a 0x124 even when we have a dump. 0x124 crashes do usually not provide much information other than a report of the error (the problem itself is a different thing from the cause).
  • The device is faulty, though that normally gives BSODs in a higher chance rate
  • The software is improperly communicating with the device

Please run following tests, SFC is for checking your file system to see if any corruption may be present preventing dumps from being written and Driver Verifier should cause a BSOD generating a dump, it is the only time we want a BSOD to happen. I suggest that you run first SFC and then driver verifier.




BSOD using PCI device, 0x124 Diagnostics Test BSOD using PCI device, 0x124
 System File Check

Please try following:
  • Open an admin command prompt
  • Copy/paste "sfc/scannow" (without quotes) and press enter
  • When it finished reboot your system
  • Open again an admin command prompt
  • Enter sfc/scannow again
If sfc/scannow says "Windows Resource Protection found corrupt files but was unable to fix some of them" after the second SFC, please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.

Make a photo of the result and post it.



BSOD using PCI device, 0x124 Diagnostic Test BSOD using PCI device, 0x124
 DRIVER VERIFIER

warning   Warning
Please make a backup of your important files and get your rescue media or create one.
Please create a restore point.

Please follow this tutorial to run driver verifier.

Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.

Note   Note
Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.
My System SpecsSystem Spec
.

22 Jun 2016   #14
atalanov

Windows 7 Enterprise x64
 
 

I ran sfc twice, with reboot in between. No errors.

Ran driver verifier for about 46 hours, no crashes.


Attached Images
BSOD using PCI device, 0x124-15-sfc-1.jpg BSOD using PCI device, 0x124-16-sfc-2.jpg 
My System SpecsSystem Spec
22 Jun 2016   #15
axe0

Windows 10 Pro
 
 

Test your system once again and keep me posted on how it goes
My System SpecsSystem Spec
23 Jun 2016   #16
atalanov

Windows 7 Enterprise x64
 
 

Did you mean test it to see if the BSOD still occurs, or to run the CPU, RAM, etc tests?

I just tested for the BSOD and it still occurs as before.
My System SpecsSystem Spec
23 Jun 2016   #17
axe0

Windows 10 Pro
 
 

Could you try to install the PCIE device on a different system and see if it crashes there.
My System SpecsSystem Spec
30 Jun 2016   #18
atalanov

Windows 7 Enterprise x64
 
 

I installed the PCI device via the PCI-PCIe interface to a PCIe slot on another system (not hand-built) running windows 10. The measurement software supplied with the device runs mostly fine. It ran several times for up to one hour at which point I terminated the software and restarted it. It then ran for about 36-48 hours before it froze, but it did not crash the computer (only the measurement software froze). I started it again and it has been running now for about 36-48 hours and the software is not frozen. Running this on the original computer, I would have gotten bluescreens of death several times by now, so it's definitely better on the other computer, but I need to run this on the original computer.
My System SpecsSystem Spec
30 Jun 2016   #19
axe0

Windows 10 Pro
 
 

That sounds like the slot on your pc is faulty.
My System SpecsSystem Spec
05 Jul 2016   #20
atalanov

Windows 7 Enterprise x64
 
 

Some updates on running it on another PC: the program froze twice, both times about approximately 40-48 hours (this seems somewhat consistent).

I attached the device back to the original PC, and this time to a different PCIe slot. Upon testing the device, the PC bluescreened on the first test and generated a minidump this time (previously it was not doing this). Since then, I have had no issues running the device continuously for several days.

Would you be able to look into this new bluescreen? I am unsure if it's still related to PCI device. I have attached another log.


Attached Files
File Type: zip COMPUTER-Tue_07_05_2016_131927_21.zip (1.49 MB, 1 views)
My System SpecsSystem Spec
Reply

 BSOD using PCI device, 0x124




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Bsod 0x124 please help
I keep getting Bsods Error code 0x124 Mostly when playing Gta san andreas or Rayman Origins I haveWindows 7 ultimate x86
BSOD Help and Support
BSOD 0x124
I have a HP Probook 4310 S, 4Gb RAM, Windows Ultimate 32 bit. Am experiencing BSOD 0x124 very frequently and randomly for the past 2 months. Also experiencing several other BSOD codes as well. I did a Hard Disk test from HP Diagnostics Tool. And it mentioned failed. Memory Test was...
BSOD Help and Support
BSOD 0x124 Hal.dll
Hey guys can you help me fix my computer?It's an insprion 580 with 8GB of ram,GT220,Recently added Thermal Cooling and 600 Watt PSU.Memtest passed all the tests.I read it could be the volts,I have no clue how do change this plus my i5 is manufacturer locked.It could be memory volts or clock speeds...
BSOD Help and Support
0x124 BSOD
I'm currently having problems with the infamous 0x124 BSOD. I started receiving this BSOD randomly about 6 days ago and the last few days its getting worse(to the point Windows won't boot without bringing up the BSOD). I tried booting into safe mode, but the BSOD still came up. To solve...
BSOD Help and Support
BSOD bug 0x124
I've recelntly started getting these annoying BSODs, I searched into it with no luck :(; after finally getting WinDbg to work :) i maneged to analyse minidumps, it indicated Bug codes 0x124 with process name = system, searching for this, it seems its a hardware issue :confused:, i've tested the RAM...
BSOD Help and Support
Trying to pin down a 0x124 BSOD
I am trying to pin down a 0x124 BSOD on the following system: AMD Phenom 9550 Quad-Core 2.20 GHz 8gb Corsair DDR2 Ram Windows 7 x64 3x WD 750gb+ HDD GeForce 9800 GT 1gb It has happened only twice, and only in the past 2 months -- the first time I thought it was a fluke, and then it...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:40.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App