Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD without the BSOD cause I lose input to monitors

28 Jun 2016   #21
joey6000

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

That's the max it hits under constant 100% load when running for extended periods. When gaming I'm usually hovering around 81. Crashes outside of gaming when idling in the high 40s. Memtest running now. See anything else that's off so far?


My System SpecsSystem Spec
.
28 Jun 2016   #22
axe0

Windows 10 Pro
 
 

I would like to know what more you have of system specs

Please fill in your system specs
Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
The PSU, cooling and other stuff are NOT mentioned in the tool.
How to fill in your system specs:

My System SpecsSystem Spec
28 Jun 2016   #23
joey6000

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Ended memtest after 10 hours, 4 complete passes, no errors. I could not wait any longer, I'll run it again tonight.

I have updated my system specs completely.

I noticed in the HD Tune Health portion that C7 required attention, does that mean anything?

Thanks axe0
My System SpecsSystem Spec
.

29 Jun 2016   #24
axe0

Windows 10 Pro
 
 

The Interface CRC Error Count is the amount of communication errors between the drive, cable and mainboard connection. Not really something to worry about as it could be there from day 1, unless it substantially increases.
My System SpecsSystem Spec
29 Jun 2016   #25
joey6000

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Ran memtest for an additional 4 passes, still no errors. When I restarted to run it, I lost date and time settings again in the bios, could that be a symptom?
Any more tests to run?

Thanks
My System SpecsSystem Spec
29 Jun 2016   #26
axe0

Windows 10 Pro
 
 

When did the date & time issue happen for the last time?

It is a symptom towards the CMOS battery.

When you run MemTest86+ it is not that you complete 8 passes by doing
3 passes at day 1,
3 passes at day 2 and
2 passes at day 3
this way you test the same memory 3 times, but the rest of the memory is not tested.
MemTest86+ needs to be run for at least 8 straight completed passes.
My System SpecsSystem Spec
29 Jun 2016   #27
joey6000

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Yeah I know, It's just going to take a full 24 hours to run but I'm pretty confident it's not the ram, because I was running with 2 sticks at a time and crashes happened with both pairs. The latest clock issue was when I restarted about 12 hours ago to run memtest
My System SpecsSystem Spec
29 Jun 2016   #28
axe0

Windows 10 Pro
 
 

MemTest86+ can take a lot of time yes, but it is important to do so.

I just noticed your memory, a problem is that running mixed memory can cause problems because they haven't been tested to work together, mixed memory always have something different what may cause problems.
My System SpecsSystem Spec
29 Jun 2016   #29
joey6000

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Yeah I know it can cuase issues, but both pairs of ram have been working together without issue for well over a year. And the crash persists even when I'm only running one at a time.
My System SpecsSystem Spec
29 Jun 2016   #30
axe0

Windows 10 Pro
 
 

Time is not important, it can be an issue at the first period or after years of issues.

We need proper results of MemTest86+, of both pairs separated, to see if either of them may have errors.
My System SpecsSystem Spec
Reply

 BSOD without the BSOD cause I lose input to monitors




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD. USB ports seem to lose power.
Hello everyone, Since a few days, I'm encountering a rather annoying problem on my desktop PC. My keyboard (and other USB items) often does not work upon start-up. I can use it to go into BIOS, but it stops working when I have to sign into Windows. Note that these USB items work fine on my...
BSOD Help and Support
BSOD when switching to HTPC input
I've got a HTPC which is hooked up to my receiver/TV, and is on all the time even though the receiver is typically. Most of the time everything works perfectly, but occasionally when I want to watch XBMC, I'll use my remote to turn on the TV and receiver, and then the computer blue screens. It...
BSOD Help and Support
Optical Mouse Input causes BSOD
Hi everyone, I recently got a used Dell mouse from an old school auction of old PC parts that still work, but they don't need anymore. I picked up an old mouse, and when I tried to plug it into my PC, and let W7 install the drivers, the system works downloading and installing the drivers for a...
BSOD Help and Support
Issues on startup (occasional BSOD or 'No Input')
Hi all, I seem to get occasional issues on startup. Either I get no input with the PC seemingly doing it's thing but with no image on the monitor or a brief Blue Screen (which has some sort of screendump going on). I might also get a 'loading files' white bar along the bottom of the screen...
BSOD Help and Support
HD monitors DVI or HDMI input ?
I am about to purchase a new 24" full HD monitor. Some I am looking at just have DVI input whereas some others have HDMI also. My GPU supports both types but which will give the best quality, or is there nothing in it ?
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:33.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App