Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Fresh Install BSOD TCpip.sys error

07 Jul 2016   #1
khrisx

Windows 7 Home Premium x64
 
 
Fresh Install BSOD TCpip.sys error

Good morning everyone,

so I've had this computer coming on 5-6 years now. but for the past year and a half its been giving me issues. I've taken it to computer repair shops left it there for months on end to receive a PC that still ISNT working..

so finally i have a coworker whos husband actually works on computers as a side gig with his son who goes to college for computer tech stuff. awesome... so they worked on my computer reinstalled windows 7 had it running no problem. but every time they would go to update the PC to windows 10 it would hardlock * by hard lock i mean it would hard freeze the whole PC and stay stuck being nonresponsive to anything you did.. IE pressing scroll lock caps lock moving the mouse etc*

Ok no big deal i didn't care much for win10. so anyways i received my PC back after it was fully updated and plugged it in. 5 minutes later after downloading Chrome (to get off of Internet explorer) & Steam. i receive a BSOD saying TCPip.sys data (insert #s here) . woo awesome.. so then talked to some of my friends who said it was the internet driver itself. which makes no sense because the guy told me it ran fine on his internet no crashing or nothing. so i unplugged my Ethernet cord from my PC and let it run all night expecting BSoD. surprising it ran for 12 hours no BSoD. no hard freeze, nothing.

so i ask. can someone please give me some ideas how how to fix this. cause I've pumped 250$ already into buying new hardware for the PC for it to still give me issues.

if anything else is required please let me know.




Attached Files
File Type: rar mycomputer.rar (57.6 KB, 4 views)
My System SpecsSystem Spec
.
08 Jul 2016   #2
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Hello and welcome Khris mate could you follow these please as I cannot open RAR files
Dump Files - Configure Windows to Create on BSOD
&
Blue Screen of Death (BSOD) Posting Instructions

That error TCpip.sys I have seen a couple of references to the network card and wifi drivers being not right and I think you could for starters reinstall the drivers for those. However from just knowing what you have in your specs I/we only know it is an Asrock Z77 Extreme and I am not getting any hits for drivers for that board on their site - have you tried the site yourself ASRock > Support you may have more luck there.

By the by the i7 are you overclocking that?? and I see you are not running any AV - any reason??
My System SpecsSystem Spec
09 Jul 2016   #3
khrisx

Windows 7 Home Premium x64
 
 

hi ICIT2LOL sorry for the late reply. here is a new upload of what you asked for.


reason why i have no AV personally is because i never know which one to get Norton always slowed down my computers when i was younger & all i am going to do on this pc is play videogames on steam / MMORPGs. any recommendations would be appreciated!


Attached Files
File Type: zip CHRIS-PC-Sat_07_09_2016_225943_06.zip (794.0 KB, 3 views)
My System SpecsSystem Spec
.

10 Jul 2016   #4
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Ok Khris now there is one dump file I am not familiar with and to be honest I am not as good as some of the others in decyphering them but in the following there seems to be a fault with your Broadcom LAN driver I am assuming.
Now I have seen this same board very recently and had great difficulty in finding drivers for it maybe you can do better than me because the other instance someone referenced the drivers but I cannot fidn that particular thread.
Code:
MODULE_NAME: k57nd60a

IMAGE_NAME:  k57nd60a.sys

BUCKET_ID:  WRONG_SYMBOLS

FAILURE_BUCKET_ID:  WRONG_SYMBOLS
My System SpecsSystem Spec
10 Jul 2016   #5
khrisx

Windows 7 Home Premium x64
 
 

Hey ICIT2LOL ! So is it a network driver error? You wouldn't happen to know anything I can use to find the "correct" driver ? Everything I've tried hasn't worked out correctly
My System SpecsSystem Spec
11 Jul 2016   #6
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Quote   Quote: Originally Posted by khrisx View Post
Hey ICIT2LOL ! So is it a network driver error? You wouldn't happen to know anything I can use to find the "correct" driver ? Everything I've tried hasn't worked out correctly
I am saying t could be mate I am not 100% sure the driver you might try the AsRock support site and see if you can find the driver it as I cannot make sense out it simply because it doesn't list drivers for the board gear.

If we could find the actual network device then the driver might be better accessed via the manufacturers site.

Now to find that use PART B: from this
Using HW Info
PART A:
You can test the volts on the PSU with HW Info HWiNFO, HWiNFO32/64 - Download < download the right bit version and close the right hand window select Sensors and scroll down to the power section where you will see what the volts are doing see my pic. In my pic the section (Nuvoton) with VBATT as a dead give away you are in the section for the rail voltages. There are other section titles and one that pops up often is ITE (sometimes the usual one for Gigabyte boards)
Now the voltage on the different rails have to be within 5% =+/- of what is required or the machine will not work properly if at all.
Limits +/-
12v = 11.4 12.6v
5v = 4.74 5.25v
3.3v = 3.135 3.465v
The Power good signal voltage at pin 8 on the 24 pin plug (grey cable) should be the same as the 5v rail reading/s
See this for the rail voltage info
PSUs 101: A Detailed Look Into Power Supplies (Section 2.)
The original right hand window shows the machine running and is handy for that but for looking at the components in some detail close it and use the main left hand side panel
FOR OTHER COMPONENTS
PART B:
Open each small square with + in it on the section the components are in and then click on the individual component/s (it will highlight in blue) - in the right hand side will appear all sorts of details including brands speeds and other essential info that particular device. See pic for example.


Attached Thumbnails
Fresh Install BSOD TCpip.sys error-network.png  
My System SpecsSystem Spec
Reply

 Fresh Install BSOD TCpip.sys error




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD after fresh install of Windows 7. Error 0x00000050.
I recently reinstalled Windows 7 on my computer after it stopped being able to boot normally. I managed to get it installed, but I won't be able to get into safe mode as it won't let me set up Windows. Every time I try to boot it normally, it creates this BSOD. I have a picture of the BSOD. ...
BSOD Help and Support
BSOD after a fresh install, error 0x0000007A
Hi. I recently managed to get a malware on my computer, the one that locks the computer up demanding payment before it unlocks your files. i just did a fresh install as my files werent very important but my computer while in idel downloading some steam games blue screened. im not sure on how to...
BSOD Help and Support
BSOD Random error messages 2nd fresh install
It would seem to be hardware since this is a 2nd install with the problem and randomized BSOD they like to come with video games but have happened when nothing other then itunes is running. Im getting to my wits end with this thing I hope i posted the info correctly I really don't know im...
BSOD Help and Support
Random BSOD(different error). Fresh install!
Hi, Operating System: Win7 Home Basic (when it was bought it had a Windows 7 home basic installed) - Tried all from Win7 Starter to Win7 Ultimate => x32-x64. - Installation date: Few hours ago. - PC(aspire 7551G) age: 2/5 years 1st BSOD => few minutes after install
BSOD Help and Support
BSOD on fresh install when install updates, misc error codes
My system info is in my profile, installing Windows 7 x64 Ultimate Retail. Attached is all of the report info. I have no idea what is going on. Whenever I try to install all of the Windows updates it blue screens. Then it will reboot, try to apply the updates, and blue screen again. I've run...
BSOD Help and Support
BSOD's after adding RAM [ tcpip.sys ] [ error:tcpip+7a6cc ]
Bsod's started since i added a 4gb ddr3 RAM(1333MHZ ddr3 corsair single stick) to my board which already has 2 more sticks of 2gb each(1333MHZ, ddr3 , kingston) They happen every few hours... I reinstalled(removed and installed) network driver thrice.(didnt reboot the system though) I...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:30.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App