Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Unrelenting BSOD calms after A/C's are on ... ?

22 Jul 2016   #31
Tousdae

Windows 7 Professional 64 bit
 
 

Ok. Well, today I haven't had any problems booting up and remaining stable ... but, I don't know if I can trust that yet. I had a nice 4 days before asking for help. I thought it was a heating problem. In those 4 days the a/c was on and I didn't get a bsod or any other problems. I hope it's fixed, but can't get my hopes up yet. Also, Windows is still scanning for updates. It's been about 2 hours now. Roy said to keep it going all night.

Do you think this has anything to do with my reformat? Maybe I did something wrong or maybe it installed screwed up?????


My System SpecsSystem Spec
.
23 Jul 2016   #32
Tousdae

Windows 7 Professional 64 bit
 
 

No good. On my first try I grabbed coffee. When I came back it was giving me a choice to boot up in safe mode or normally. I did safe mode and rebooted. Then when my desktop was back I got a bsod. Also, windows never left me update.
My System SpecsSystem Spec
23 Jul 2016   #33
axe0

Windows 10 Pro
 
 

A BSOD in safe mode would be the result of hardware problems, rarely a bad Windows installation.
If you've performed either of the suggested tests, please run them again per the instructions provided.





Unrelenting BSOD calms after A/C's are on ... ? Diagnostics Troubleshooting Unrelenting BSOD calms after A/C's are on ... ?
Read carefully before proceeding.


warning   Warning
If you're overclocking your system, revert back to stock clocks now.

Note   Note
Test the system once the overclock is removed before continuing with the steps outlined below.


Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test




Unrelenting BSOD calms after A/C's are on ... ? ONE Unrelenting BSOD calms after A/C's are on ... ?
 CPU TEST

Run Prime95 and/or IntelBurnTest to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums & CPU - Stress Test Using IntelBurnTest

warning   Warning
Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.

Make a photo of the result and post it.




Unrelenting BSOD calms after A/C's are on ... ? TWO Unrelenting BSOD calms after A/C's are on ... ?
 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Help Forums

Note   Note


MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Make a photo of the result and post it please.

Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.




Unrelenting BSOD calms after A/C's are on ... ? THREE Unrelenting BSOD calms after A/C's are on ... ?
 HDD TEST

Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run the long test.
Note   Note
Do not run SeaTools on an SSD as the results will be invalid.

Make a photo of the result and post it.

Run chkdsk
Disk Check - Windows 7 Help Forums
Use option TWO
Upload the chkdsk log :arrow: Chkdsk Log in Event Viewer - Read in Windows 10 - Windows 10 Forums

Run HDTune to
  • scan for errors, no quick scan but full scan
  • check the health,
  • benchmark.
It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following
  • the error scan,
  • the health,
  • the benchmark incl. following
    • transfer rate,
    • access time,
    • burst rate,
    • cpu usage.




Unrelenting BSOD calms after A/C's are on ... ? FOUR Unrelenting BSOD calms after A/C's are on ... ?
 GPU TEST

Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 7 Help Forums

Note   Note
Run Furmark for around 30 minutes.

warning   Warning
Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.

Make a photo of the result and post it.
My System SpecsSystem Spec
.

24 Jul 2016   #34
Tousdae

Windows 7 Professional 64 bit
 
 

After this morning I'm about ready to just go buy another F computer!! I'll get to the tests above, but I need to chill out first! I'm sooooo sick of this!
My System SpecsSystem Spec
24 Jul 2016   #35
Tousdae

Windows 7 Professional 64 bit
 
 

+This is supposed to be the cpu stress test. I don't know how to proceed.


Attached Thumbnails
Unrelenting BSOD calms after A/C's are on ... ?-untitled.jpg  
My System SpecsSystem Spec
24 Jul 2016   #36
Tousdae

Windows 7 Professional 64 bit
 
 

I see things happening. Never mind.
My System SpecsSystem Spec
24 Jul 2016   #37
Tousdae

Windows 7 Professional 64 bit
 
 

This cpu stress test is still working after 2 hours. Is this typical? When do I know it's done?
My System SpecsSystem Spec
24 Jul 2016   #38
Tousdae

Windows 7 Professional 64 bit
 
 

Someone a friend knows is going to look at my pc. Thank you very much for your time.
My System SpecsSystem Spec
Reply

 Unrelenting BSOD calms after A/C's are on ... ?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
faint lines when in full screen games. using d3doverider calms it alot
horizontal faint lines when in full screen games. using d3doverider(bundled with rivatuner) calms it alot and makes it dissapear in alot of games. I upgraded from my 5870 which was fine to my new ATI 6990. tested it on several screens and it makes no difference. So V-Sync and triple buffer has a...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:00.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App