Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Error

22 Aug 2016   #21
axe0

Windows 10 Pro
 
 

That is difficult to say, but I would think that if you would do nothing in some months your hard drive may become unbootable.
It is difficult to say, because it is for everyone different. For one it is a week before the drive is unbootable, others can go maybe a year before the hard drive becomes unbootable.


My System SpecsSystem Spec
.
22 Aug 2016   #22
superstar

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

ok will take care of it. Thank you so much for helping me out.
My System SpecsSystem Spec
22 Aug 2016   #23
axe0

Windows 10 Pro
 
 

You're welcome
My System SpecsSystem Spec
.

24 Aug 2016   #24
superstar

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

hey when BSOD occurs its showing Kernel data inpage error . I recently observed does that mean anything?
My System SpecsSystem Spec
24 Aug 2016   #25
axe0

Windows 10 Pro
 
 

Its meaning depends on what the second parameter is.
My System SpecsSystem Spec
24 Aug 2016   #26
superstar

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I clicked this while back when it crashed. can you please check if its any of help. sorry for the bad pic


Attached Thumbnails
BSOD Error-img_20160820_135251.jpg  
My System SpecsSystem Spec
24 Aug 2016   #27
axe0

Windows 10 Pro
 
 

I'll clear a few things up about the meaning of the parameter
If the parameter is either of the following (excluding the F's), it usually means that a I/O error has occured.
  • 0xC000000E,
  • 0xC000009C,
  • 0xC000009D,
  • 0xC0000185
An I/O error is caused by certain things, for example
  • 0xC000009C > A bad block on the hard drive usually
  • 0xC000009D > A bad or loose cable or the disk is not detected by the controller, check the BIOS to see if the disk is present in case of the controller issue
  • 0xC0000185 > A bad cable or 2 devices that are trying to use the same IRQ
  • 0xC000016A > A bad block on the hard drive

As it is a 0xC0000185 with a Dell laptop, the IRQ issue can be ruled out because a Dell laptop has not enough options in the BIOS to configure IRQ's.
My System SpecsSystem Spec
24 Aug 2016   #28
superstar

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

So i still need to change the hard drive, is that what you are saying? Or is there a way we can work with this? I heard that we can separate those bad sectors and we can leave them unused and we can still have a healthy hard disk
My System SpecsSystem Spec
24 Aug 2016   #29
axe0

Windows 10 Pro
 
 

In your situation bad sectors isn't the issue. It is the hard drive itself that is failing, a short drive self test failing says that a hard drive is failing.
My System SpecsSystem Spec
24 Aug 2016   #30
superstar

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Oh thansk again mate
My System SpecsSystem Spec
Reply

 BSOD Error




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Kernel_data_inpage_error Or Fatal Error bsod error
Hello, First of all, thank you very much for helping the members. However, I've a problem with my pc. Almost daily I get a BSOD Error from a very long-time Kernel_data_inpage_error BSOD, last bsod I got yesterday it was a fatal error. It changes sometimes and not getting the bsod...
BSOD Help and Support
BSOD Unsure of Error Code but says Display Driver Error
I keep getting a display driver error and then the computer crashes with the BSOD. It happens quite often but I can't get the error message. I checked my display drivers and according to the device manager, the drivers are up to date. I believe I have a AMD Radeon HD 7570 I don't know...
BSOD Help and Support
BSOD Memory Management Error, didn't catch error code.
Hello again, BSOD Forum, I've been free of frequent BSODs since earlier this year. Recently I must have installed some software or something else must have gone wrong, because the blue screens are back. Here is what happened earlier this year, in case anyone needs any further context: ...
BSOD Help and Support
KSOD error before Login Screen then BSOD, error 0x0000007A
Hi 2 days ago I turned my computer on and I was logging in as normal. It finished doing the 'starting windows sequence' and then the screen turned black, with a cursor. I waited then the BSOD came up. ALSO the KSOD comes up in the Safe Mode as well.I spam f8 and I have tried everything.The most...
BSOD Help and Support
BSOD error.. Restarts, but power button stays on, graphics card error?
Hey guys, i want to thank you ahead of time for helping me. This BSOD is a pain in the butt. Intel Pentium 2.8GHZ RAM 3.5 32 bit OS Intel GG965 Express Chipset Family I have already reinstalled the operating system multiple times, i think its a faulty graphics card, but i want to be...
BSOD Help and Support
BSOD. error Custom built computer. error unknown between 0 or 1077...
Well I built this computer in september of 2011 everything was running great no problems at all until today. I left it on and went to the store came back and BSOD. My computer restarted before I could write down any information "Error code" system restore said it was a "unknown error" which...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:13.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App