Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Recently reimaged computer - NTFS_FILE_SYSTEM BSOD

01 Sep 2016   #11
User16457

Windows 7 Professional x64
 
 

DM Log Collector Zip: https://www.dropbox.com/s/87ks14xg6l...20_05.zip?dl=0


My System SpecsSystem Spec
.
01 Sep 2016   #12
axe0

Windows 10 Pro
 
 

Run following command in an admin command prompt, it'll create a few files on the desktop, zip these up and upload the zip please.
My System SpecsSystem Spec
01 Sep 2016   #13
User16457

Windows 7 Professional x64
 
 

Attached are the two files that were created:

info.zip


My System SpecsSystem Spec
.

02 Sep 2016   #14
axe0

Windows 10 Pro
 
 

Apologies for the trouble, a few errors were present in the previous code, please try this code:
Code:
msinfo32 /nfo "%USERPROFILE%\Desktop\SFdebugFiles\msinfo32.nfo"&reg export HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall
"%USERPROFILE%\Desktop\uninstall.txt"&reg export "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Active Setup\Installed Components" "%USERPROFILE%\Desktop\installed.txt"
It should create 3 files on the desktop
1. msinfo32.nfo
2. uninstall.txt
3. installed.txt
zip these up and upload the zip.
My System SpecsSystem Spec
02 Sep 2016   #15
User16457

Windows 7 Professional x64
 
 

Thanks,

I tried the new code and it looked like it was collecting some information, but there was a notification of a syntax error. Looks like no files were produced.

The error said: "ERROR: Invalid syntax. Type "REG EXPORT /?" for usage."
My System SpecsSystem Spec
02 Sep 2016   #16
axe0

Windows 10 Pro
 
 

Again a few errors...
I've tested the commands separately on my system, they work successfully.
If it doesn't work this time we'll have to do it without them.

Please run following code in an admin command prompt, it should create the 3 files mentioned in post #14
Code:
msinfo32 /nfo "%USERPROFILE%\Desktop\msinfo32.nfo"&reg export HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall "%USERPROFILE%\Desktop\uninstall.txt"&reg export HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Active Setup\Installed Components "%USERPROFILE%\Desktop\installed.txt"
My System SpecsSystem Spec
02 Sep 2016   #17
User16457

Windows 7 Professional x64
 
 

Got two of the files this time, but there was still an error.

Here are two of the three: msinfo32+uninstall.zip


My System SpecsSystem Spec
02 Sep 2016   #18
axe0

Windows 10 Pro
 
 

I cannot find the 0xC1 crash from the picture you posted in the previous page, but I did find a 0xA crash with verifier enabled which is the last from yesterday, 1:05 PM. Were the Windows drivers still checked in the driver verifier settings at that time?
My System SpecsSystem Spec
02 Sep 2016   #19
User16457

Windows 7 Professional x64
 
 

At the time of the IRQL_NOT_LESS_OR_EQUAL crash at 1:05 yesterday, only the non-Microsoft drivers were selected.
My System SpecsSystem Spec
02 Sep 2016   #20
axe0

Windows 10 Pro
 
 

Indicative to hardware problems or other problems, at least not a driver issue!




Recently reimaged computer - NTFS_FILE_SYSTEM BSOD Diagnostic Test Recently reimaged computer - NTFS_FILE_SYSTEM BSOD
 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums

Note   Note


MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


Make a photo of the result and post it.

Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.
My System SpecsSystem Spec
Reply

 Recently reimaged computer - NTFS_FILE_SYSTEM BSOD




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD, Computer Restarting, Began Recently
The BSOD just began recently and the computer restarts. I did see an error related to Microsoft Security Essentials, so I uninstalled that. Not long later, the computer restarted again. I updated and ran Malwarebytes and nothing was found. Also ran CCleaner and let that do its thing. Ran the...
BSOD Help and Support
Ntfs_file_system bsod
The ZIP file contains errors from long ago that can be ignored. On the 3rd I installed windows updates, along with running scannow, chkdsk and windows memory diagnostics. In addition I have reinstalled the graphic card drivers. Something else that was interesting was that after the BSOD on the...
BSOD Help and Support
BSOD with NTFS_FILE_SYSTEM Bugstring
Sorry I don't know very much about computers. I don't know what's the problem in my PC, I think its a hardware thing. My computer is randomly showing BSOD (sometimes within an hour etc). But there is one day wherein it does not go into BSOD. Also some applications like google chrome or vlc...
BSOD Help and Support
Recently built my computer, have a few BSOD
I'm running Windows 8.1 64 bit, I've had "irql_not_less_or_equal" BSOD and "paged fault in nonpaged area" BSOD. Specs- Motherboard- ASUS MAXIMUS VI HERO LGA 1150 Intel CPU- Intel Core i5-4570 Haswell Quad-Core 3.2GHz Ram- G.SKILL Ripjaws X Series 4GB (2 x 2GB) 240-Pin DDR3 Graphics- PNY...
BSOD Help and Support
Had my computer for awhile recently started getting BSOD
Since Ive had an issue with hardware on an old computer I just reformatted it everytime this would come up. Now that I built my custom PC but about a month or so ago I've started to get BSOD and I'm not quite sure how to fix it. No idea how to get the error reports or anything, my computer usually...
BSOD Help and Support
BSOD on recently build computer when starting up, error 0x000000f4
Hello, I registered in this forum because of this BSOD problem. It's my first home-made PC and I am a bit concerned bacause of all the BSOD's I'm having. Here's the problem: I start up the pc every morning, I log in on Windows and everything's perfect. I start doing things (openening files,...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:48.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App