Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Various BSOD's just after startup

07 Oct 2016   #1
LaserChild9

Windows 7 Professional 64
 
 
Various BSOD's just after startup

Hi all,

So I started getting BSOD's about a month ago, starting with Bad_Pool_Caller. I installed WhoCrashed which confirmed what I suspected, the crashes were caused by a ramdisk driver that my motherboard had recently installed. I uninstalled this software and the BSOD's stopped, for a few days at least. I have started getting Page Fault BSOD's regularly now and they only ever happen just after startup and only once, never during extended use. When I try to check what is causing them with WhoCrashed I get a message saying that crash dumps are enabled but no valid crash dumps are on my computer.

I have been trying to solve this with the folks over @ Toms Hardware but they recommended that I come here so I will detail what I have already done with them to save some time:

I have checked that the Page file system is setup correctly.
I have tried running driver verifier, but still no Mini-dump files.
I have run memtest (no errors)
I have run chkdsk after which I had a few days with no BSOD's but when I did have one a mini dump was written, though no mini dump files have been written since.

The Errors that I am getting are BAD_POOL_CALLER and Page Fault in Non Paged Area.




Attached Files
File Type: zip LASERCHILD9-PC-07_10_2016_121326_59.zip (1.71 MB, 3 views)
My System SpecsSystem Spec
.
08 Oct 2016   #2
axe0

Windows 10 Pro
 
 

Hi LaserChild9,

Welcome to the 7forums

Is there any driver mentioned in the BSOD screen?

Does the BSOD process go properly? Is below in the screen no error displayed about something that went wrong?
Please make a photo of the BSOD screen and post the photo, to ensure that you will have enough time I would recommend to disable the auto restart option in the recovery options.
Various BSOD's just after startup-auto-restart-recovery.png
Dump Files - Configure Windows to Create on BSOD


My System SpecsSystem Spec
08 Oct 2016   #3
torchwood

W7 home premium 32bit/W7HP 64bit/w10 tp insider ring
 
 

Hi LaserChild9,

Are you overclocking?
I see alot of services included that point towards this

As a side point you appear to have a problem with
Peer Networking connections in regard to your user profile

@Axe0
DxDiag Previously: Crashed in system information (stage 4) & Direct3D (stage 3) & DirectSound (stage 3) & DirectInput (stage 1) & DirectShow (stage 1). Re-running DxDiag with "dontskip" command line parameter or choosing not to bypass information gathering when prompted might result in DxDiag successfully obtaining this information



Roy
My System SpecsSystem Spec
.

08 Oct 2016   #4
BorisTheAnimal

Windows 7 Home Premium
 
 

I can't comprehend how the both of you missed the dump file.

Anyway hello LaserChild9.

The BSOD was caused by amifldrv64.sys which is the driver for the MSI Live Updater, I would recommend that you uninstall through the control panel!

Code:
*** WARNING: Unable to verify timestamp for amifldrv64.sys
*** ERROR: Module load completed but symbols could not be loaded for amifldrv64.sys
Probably caused by : amifldrv64.sys ( amifldrv64+1a04 )
And torchwood he ain't overclocking:

Code:
2: kd> !sysinfo cpuspeed
CPUID:        "Intel(R) Core(TM) i5-4690K CPU @ 3.50GHz"
MaxSpeed:     3500
CurrentSpeed: 3500
Cheers, Boris
My System SpecsSystem Spec
09 Oct 2016   #5
axe0

Windows 10 Pro
 
 

@Boris, that dump is an old one...
My System SpecsSystem Spec
09 Oct 2016   #6
BorisTheAnimal

Windows 7 Home Premium
 
 

Quote   Quote: Originally Posted by axe0 View Post
@Boris, that dump is an old one...
It says 092716, if that's not shortened for 27th of September 2016, then what?
My System SpecsSystem Spec
09 Oct 2016   #7
axe0

Windows 10 Pro
 
 

That is, but I personally don't find it worthy to check on dumps that are about 2 weeks or more old.
My System SpecsSystem Spec
09 Oct 2016   #8
BorisTheAnimal

Windows 7 Home Premium
 
 

Quote   Quote: Originally Posted by axe0 View Post
That is, but I personally don't find it worthy to check on dumps that are about 2 weeks or more old.
Well the service was still running so I just thought that it would mean troubles for him.
My System SpecsSystem Spec
18 Oct 2016   #9
LaserChild9

Windows 7 Professional 64
 
 

Hi all, sorry for the dely, the PC has been behaving for the most part, so another BSOD today, again no dump filebut I did get a pic of it as requested:



Hope this is useful.
My System SpecsSystem Spec
18 Oct 2016   #10
axe0

Windows 10 Pro
 
 

What memory test did you run?
My System SpecsSystem Spec
Reply

 Various BSOD's just after startup




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD during windows startup; can't safe mode; startup repair can't fix
Consistent BSOD during Windows startup for both normal mode and safe mode. BSOD problem started shortly after buggy installations of Microsoft Visual C++ 2005 x64, Microsoft .Net Framework 1.1, and AMD Catalyst Drivers 13.9; and turning off Microsoft .Net Framework 3.5.1. Startup Repair is...
BSOD Help and Support
Brief BSOD on Startup, Startup Recovery Hangs
I have Win 7 Home and in the last couple of days I have been trying to do a backup onto an external drive. The problem comes in when I attempt to start my laptop so that I can begin the backup process, the screen flickers a BSOD, says startup failed and do I want to run Startup Recovery. If I say...
BSOD Help and Support
BSOD on startup, unknown error, startup repair running too long
As the title suggests, my Acer Aspire has been running startup repair for over 20 hours following a BSOD yesterday. I'm not sure if it's worth the wait so maybe you all can shed some light. Yesterday I was stressfully trying to search for something (using Chrome) and the website I was on froze;...
BSOD Help and Support
BSOD on Startup - Startup Reapir not working
On Startup, after POST, I get this BSOD: STOP: c000021a {Fatal System Error} The verification of a knownDLL failed. system process terminated unexpectedly with a status of 0xc000012f (0x00360bf0 0x00000000). The system has shut down. Upon Reboot, I am advised to go to the startup repair....
BSOD Help and Support
BSOD at startup, cant repair startup
i had a bsod 3 days ago with no reason when its at Welcome screen and my startup items are not loaded at all(all drivers programs etc.). i tried to reboot and my pc gone wild. it cant even see welcome screen cuz of bsods. also i am having black screens when booting up. sometimes its just freezes...
BSOD Help and Support
BSOD on startup , error 0x000000f4 . startup takes half an hour
so everything was fine when my laptop started to become very slow and i used to get the BSOD very often so i decided to recover the system to the initial state . i did that and everything was fine , then i updated the windows 7 service pack 1 and finished the installation and rebooted my computer ,...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:48.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App