Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 6 different BSODs while normally using computer (hardware tested - OK)

16 Oct 2016   #11
axe0

Windows 10 Pro
 
 

Winio, many AV programs provide normal protection including MSE. The only thing is that you need to stay careful on the internet.


My System SpecsSystem Spec
.
16 Oct 2016   #12
axe0

Windows 10 Pro
 
 

Please remove the 2GB memory stick, mixed memory may cause a lot of problems where the root cause is difficult to identify.
My System SpecsSystem Spec
16 Oct 2016   #13
winio

Windows 7 Proffesional x64
 
 

I have tested each single stick with Memtest, it was OK
About Antivirus - Avast is widely used, so why it may generate problems?
My System SpecsSystem Spec
.

16 Oct 2016   #14
axe0

Windows 10 Pro
 
 

Many security programs are widely used, Avast, AVG, Kaspersky, McAfee (unfortunately IMHO), etc., all of them have caused various of problems for many users due to bugs. Hardware and software is usually updated/upgraded. When you update Windows, Windows changes in its way of it works, if programs don't update their software or improperly update their software problems occur due to bugs.

Why sometimes a problem occurs after a while nothing seems to have changed? The 'changed' part is 99% of the time invalid, because users change settings in programs that causes the program to change its behaviour, when looking at the big picture this causes various of changes where some changes are unfortunately resulting in issues.
My System SpecsSystem Spec
16 Oct 2016   #15
winio

Windows 7 Proffesional x64
 
 

Until first post I had 5 new BSODs (2x7E, 2x3B and 4C) - do You need files?
My System SpecsSystem Spec
16 Oct 2016   #16
torchwood

W7 home premium 32bit/W7HP 64bit/w10 tp insider ring
 
 

Hi Winio,
You should have a dreamspark licence purchased via Warsaw Uni.
MSDN keys are no longer sold.

And as i said before you have a PRO version, the key is for Ultimate.
the error
HrOnline: 0x80072EE7 : this error code means "Address can not be resolved" This is referring to either the address of the Activation Servers or the Validation servers. In plain speak, this means your computer can not find the place it needs to go to Activate or Validate.

Roy
My System SpecsSystem Spec
16 Oct 2016   #17
winio

Windows 7 Proffesional x64
 
 

My System SpecsSystem Spec
18 Oct 2016   #18
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Well you can if you like do a clean install as long as you have a valid key if you just download the free ISO for Pro - after you have saved all your data in whatever way you want.
The ISO can be downloaded from here Windows 7 Direct Download Links just make sure it is the right version - 7 Pro and the correct bit version too. You then burn that ISO toa bootable disk or stick - not keen on sticks myself and just install but I would recommend you clean the drive first using DISKPART.
Disk - Clean and Clean All with Diskpart Command

then
Clean Install Windows 7
Making the bootable disk is fairly straight forward using something like ImgBurn The Official ImgBurn Website
My System SpecsSystem Spec
18 Oct 2016   #19
winio

Windows 7 Proffesional x64
 
 

As I have written before - i did clean install month ago - downloaded Windows 7 Proffesional x64 iso from the Microsoft Imagine website and I still have BSODs - so it is why I have written here. Probably one of the Toshiba drivers is faulty (maybe graphic card or intel RST), but I do not know which - all are up to date.
My System SpecsSystem Spec
18 Oct 2016   #20
axe0

Windows 10 Pro
 
 

Quote   Quote: Originally Posted by winio View Post
I have tested each single stick with Memtest, it was OK
Again, please remove the 2GB memory stick.

It doesn't matter that you tested each stick and the result was OK, mixed memory run on different specs causing instability because either of them will have to run under its designed specs what causes problems.
My System SpecsSystem Spec
Reply

 6 different BSODs while normally using computer (hardware tested - OK)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Variety of BSODs - Log/Event Files included RAM TESTED
So I've had a variety of BSODs from Bad Pool Header, Memory Allocation, and lots of System Service Exceptions over the past month or so. I've been lazy about it as it only happens sometimes, but recently it's been happening a lot more so I've got to get it fixed. It usually happens as I start to...
BSOD Help and Support
BSODs, possible faulty hardware but not sure...
Hi Everyone, My PC recently crashed, i.e. would not boot into Windows and I had to reinstall. I thought I may have fried the processor by overheating it (apparently I did not apply the thermal paste very effectively when I assembled this thing back in 2011...) but that does not seem to be the...
BSOD Help and Support
New Hardware BSODs
Recently I had my PSU die and when removing it I cleaned out the computer, and either when the PSU died or when I was cleaning out the computer, my CPU died too. So I went out and bought a new PSU, CPU, Motherboard, and RAM. I installed it all, installed Windows 7, started installing my programs,...
BSOD Help and Support
New Hardware Same BSoDs
Hey everyone, Unfortunately, it looks like I'm back with blue screen errors again. Previously, I had updated all of my drivers, and when that failed I sent my computer back to the manufacturer for repairs. Both the motherboard and CPU were replaced and all seemed well until a little while ago. ...
BSOD Help and Support
NEW PC HARDWARE BSODS - minidumps in
Hi you all!! Well, I've had a lot of bsods. I've test hdd, ram, change cpu but they still here... So I need your help;) Bsods always happen after few minutes - three, four - system is logged. And, after first bsod, such restart means another bsod...:mad: So, I turn pc off and go to sleep. In...
BSOD Help and Support
BSODs...possibly hardware
I did an upgrade on a computer about a week ago. After about 4 days it started BSODing. It wa so bad that I couldnt get the minidump out and have tried reinstalling 7 and even the Vista factory image. However, it would BSOD before the image would fully load. Clearly this is a hardware issue though...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:31.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App