You're getting 0x116 errors in relation to video.
Check the bios for a Plug and Play setting. Set it to yes if there's one.
Make sure you're using latest video driver
from NVIDIA's website and motherboard drivers
If you're overclocking anything, stop.
Adjust the system RAM Vdimm (voltage), timings and frequency to what is recommended by the maker, in the bios. Visit their page for the specific RAM modules.
Use the spd tab of CPU-Z to find out which you have.
Test how it goes. If still crashes, use a large room fan blowing on the inside of the case to test if it happens like this.
Install the driver for your monitor.