Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Memory_management bsod


16 Jan 2010   #1

Windows 7 x64 Ultimate
 
 
Memory_management bsod

Goodday folks

I'm new here, just bought myself a copy of Win 7 Ultimate x64 and got some issues.
I keep getting BSOD's (MEMORY_MANAGEMENT mostly) and can't seem to find the problem. They happen pretty randomly, but mostly during internet browsing/downloading.

Here is what I tried:
- Clean installed Win 7 x64.
- Stock settings (even tried underclocking the RAM).
- RAM is set to 1.65v (as it is rated, according to OCZ).
- Loosened the RAM timings/Mhz.
- 5+ runs of memtest 86+ 4.00 (no errors).
- Ran the integrity scan, no issues detected.
- Uninstalled Anti-virus (tried 2 of them actually, none is installed at this time).
- Tried different video drivers (latest stable and latest beta).

I'm guessing that it is some driver issue, maybe chipset or network, but I think I'm running the latest driver versions at this time for both.

I attached my latest mini-dump from a crash, hope you guys can help me out
This one happened during a Prime95 run on blend.

Thanks in advance.

My System SpecsSystem Spec
.

16 Jan 2010   #2

Windows 7 Ult, Windows 8.1 Pro,
 
 

Have you tried the SMP memory profile yet? Sometimes OCZ requires a bit more memory voltage to run stable. 1066MHz memory speed is considered not overclocked so consider that anything over that is overclocking and will usually require some voltage adjustments in bios to run stable. CPU VTT voltage adjustments can go a long way towards getting you stable when overclocking the memory on i7 systems.
My System SpecsSystem Spec
16 Jan 2010   #3

Windows 7 Ultimate (32 bit)
 
 

Quote   Quote: Originally Posted by Eldae View Post
Goodday folks

I'm new here, just bought myself a copy of Win 7 Ultimate x64 and got some issues.
I keep getting BSOD's (MEMORY_MANAGEMENT mostly) and can't seem to find the problem. They happen pretty randomly, but mostly during internet browsing/downloading.

Here is what I tried:
- Clean installed Win 7 x64.
- Stock settings (even tried underclocking the RAM).
- RAM is set to 1.65v (as it is rated, according to OCZ).
- Loosened the RAM timings/Mhz.
- 5+ runs of memtest 86+ 4.00 (no errors).
- Ran the integrity scan, no issues detected.
- Uninstalled Anti-virus (tried 2 of them actually, none is installed at this time).
- Tried different video drivers (latest stable and latest beta).

I'm guessing that it is some driver issue, maybe chipset or network, but I think I'm running the latest driver versions at this time for both.

I attached my latest mini-dump from a crash, hope you guys can help me out
This one happened during a Prime95 run on blend.

Thanks in advance.
Long shot but try turning off Turbo Mode inyour BIOS.
Also what BIOS version do you have installed. V1639 repaired an memory issue.
My System SpecsSystem Spec
.


16 Jan 2010   #4

Windows 7 x64 Ultimate
 
 

Thanks for the quick replies

I tried both 1333 and 1600 mhz and VTT between 1.8 and 1.88. All had BSODs, but no errors at all in Memtest86+.
I'll try 1066 mhz after the next BSOD

Turbo mode is already off, I also tried disabling C1E and Speedstep.

I tried BIOS versions: 1504, 1639 and 1704, all gave the same issues I'm afraid :'(
My System SpecsSystem Spec
16 Jan 2010   #5

Windows 7 Ult, Windows 8.1 Pro,
 
 

If your memory supports SMP profiles enabling it that will usually get the settings correct for you.
My System SpecsSystem Spec
16 Jan 2010   #6

Windows 7 x64 Ultimate
 
 

Is that the same as XMP? If so I tried that one
If not, I'll give it a go next reboot (I'll check if I can find something like it in the BIOS).

EDIT: Just XMP, which I already tried.
My System SpecsSystem Spec
16 Jan 2010   #7

Windows 7 x64 Ultimate
 
 

I think I fixed the issue!
After trying to run my mem @ 1066 mhz without any luck; I tried uninstalling the Intel drivers (Intel Matrix Storage Manager).
Windows went back to it's standard drivers and it seems that fixed my issue (already passed an hour of Prime95 and 5 runs on LinX at this time).

I guess the Intel Matrix Storage Manager version 8.​9.​0.​1023 has some stability issues?
My System SpecsSystem Spec
17 Jan 2010   #8

Windows 7 x64 Ultimate
 
 

I was too soon to judge :'(

It ran last evening without any issues after 2 hours Prime95 and 10 LinX runs, I have used the computer afterwards for another 3 hours. But when I started up this morning, I got another BSOD again... 3 so far.

So any other thoughts? :P
My System SpecsSystem Spec
Reply

 Memory_management bsod




Thread Tools



Similar help and support threads for2: Memory_management bsod
Thread Forum
Bsod- memory_management BSOD Help and Support
BSOD - Memory_management BSOD Help and Support
Solved BSOD Memory_Management BSOD Help and Support
Memory_Management BSOD BSOD Help and Support
BSOD - memory_management, please help BSOD Help and Support
BSOD memory_management BSOD Help and Support
Memory_management bsod BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:06 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33