Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 can't get past logo


19 Jan 2010   #1

Windows 7
 
 
Windows 7 can't get past logo

Hi guys,

I'm having a problem sort of relating to BSOD. I honestly wasn't sure where to put this so I put it here. Please correct me if I'm wrong.

Problem is that my freshly installed Windows 7 which worked great for a couple of days began getting bluescreens everytime I tried to shutdown or put it into sleep mode. It said something about usbhub.sys. Apparently I haven't installed all my motherboard and graphicscard drivers yet. Problem now is that my windows 7 hangs at the "floating" logo in the beginning. The logo "floats" for a while but then freezes completely and does not advance. Therefore I am unable to get into Windows and install drivers. Safe mode loads up the drivers but also hangs there.

Thanks in advance!


My System SpecsSystem Spec
.

19 Jan 2010   #2

Windows 7 Ultimate 32 bit
 
 

in order for us to help you as quickly as possible please fill in your system specs was this an upgrade or format and install 32 bit or 64 bit what have you tried to solve the issue please include your power supply info in specs was this system functioning fine previous to windows 7 the more info the better
My System SpecsSystem Spec
19 Jan 2010   #3

Windows 7
 
 

Quote   Quote: Originally Posted by computersplus View Post
in order for us to help you as quickly as possible please fill in your system specs was this an upgrade or format and install 32 bit or 64 bit what have you tried to solve the issue please include your power supply info in specs was this system functioning fine previous to windows 7 the more info the better
Try my best, but as I said previously I'm unable to access my desktop and information I could find from there so it will be limited:

Specs:

4 GIG's ram, 3.50 in use
32bit (x86)
ASUS M2N-2 Mobo
ATI Radeon Sapphire -something-

And yes, it was a clean install (previously had XP), though I have recently restored some things from my external hard drive. System was functioning as it should before the install.

Things I've tried so far:

Memory Diagnostics, no success (found no problems)

Tried to boot in safe-mode, no success
Repeatedly tried to start the computer over and over again, success (took maybe 10 tries)

And right after I finish typing this (I'm on another computer) I'll try doing another clean install, seeing it wouldn't cause me much trouble since I barely have anything installed anyway. I'll wait for a few hours though, if you guys could figure something out to save me some trouble.

PS: The Windows 7 worked fine for a day or two, but then started malfunctioning as explained in my first post.
My System SpecsSystem Spec
.


19 Jan 2010   #4

Windows 7 Ultimate 32 bit
 
 

in your bios check your SATA controller and set it to IDE replace your SATA also if you have a spare
My System SpecsSystem Spec
19 Jan 2010   #5

 

Don't change the hard drive type in your bios, it could render the system unbootable. I would try booting into safe mode (press F8 before the windows logo comes up) and do a system restore.
My System SpecsSystem Spec
19 Jan 2010   #6

 
 

I agree. I had this problem soon after I installed 7. I quick system restore fixed the problem. Make sure you are installing the correct drivers for either 32 bit or 64 bit. That was where my system froze.
My System SpecsSystem Spec
19 Jan 2010   #7

Windows 7 Ultimate 32 bit
 
 

you need to find the root cause of the issue system restore is not the answer as the problem could reappear if it was caused by something you installed or did wrong
My System SpecsSystem Spec
19 Jan 2010   #8

 

Quote   Quote: Originally Posted by computersplus View Post
you need to find the root cause of the issue system restore is not the answer as the problem could reappear if it was caused by something you installed or did wrong
A system restore might well resolve the issue. If the problem occurs again, Then you will have a tighter timeframe to remember what changes you have made.
My System SpecsSystem Spec
19 Jan 2010   #9

Windows 7 Ultimate 32 bit
 
 

believe what you will but system restore can just as easily compound existing problems
My System SpecsSystem Spec
19 Jan 2010   #10

Windows 7
 
 

Okay. Thanks for all the help guys, but I did a clean install from the disk, and the problem still occurs, yet most of the time I'm able to boot my computer normally. Only rarely does it freeze at the logo anymore. Even so, it's still very irritating. Blue screens have apparently gone away, atleast for the moment...
My System SpecsSystem Spec
Reply

 Windows 7 can't get past logo




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:31 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33