Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD "7f"

23 Jan 2010   #1
Steeevoe

Windows 7 x64
 
 
Random BSOD "7f"

A month ago I upgraded my computer, adding new hard drive, mobo and processor, stuck windows 7 64bit on it. Other hard drive runs 32bit XP,although I don't use it.

Only since I came back to my university house, I keep getting BSOD randomly. I can make any links from what I do. They occur about once every six hours.

Running AVG and ZoneAlarm if that helps.



Please help


My System SpecsSystem Spec
.
23 Jan 2010   #2
Pauly

Win7 Ultimate X64
 
 

Hi and welcome to SF

Just had a look at your dump files and i believe the problem is based around your network drivers, NETIO.sys is flagged as causing the problems, please update all network drivers and see if this improves system stability

When updating drivers where possible dont use device manager update driver function, check out your what hardware you got and then visit manufacturers website and obtain latest driver for your specific product, if your using onboard network then this will be mobo manufacturer site or if network card visit their site
Heres the link for your mobo drivers page
http://www.asrock.com/mb/download.as...1M-GS&o=Win764
Post back your results

Hope this helps
My System SpecsSystem Spec
23 Jan 2010   #3
Steeevoe

Windows 7 x64
 
 

Thank you for the warm welcome!

I installed the drivers that were on the website about an hour or so ago. There has been no problems so far. I will use my pc alot for the next few hours to see if I have any problems.

Thanks for the help


However...
My System SpecsSystem Spec
.

23 Jan 2010   #4
Steeevoe

Windows 7 x64
 
 

I just had another BSOD, unfortunately it still happens.

File attached.




I noticed MS Toredo Tunneling Adapter in Device manager shows error "Device cannot start code10"

Programs installed on the first date of problems are acrobat reader and Microsoft Silverlight, whatever that does.
My System SpecsSystem Spec
23 Jan 2010   #5
Pauly

Win7 Ultimate X64
 
 

Zone alarm seems to cause a lot of probs for some people might not be the cause but i recommend removing it til we sort this prob, firewall can often be the prob for this kind of error try it and see how you go, run mse for the time being see if it improves system stability

Post back your results

Hope this helps
My System SpecsSystem Spec
24 Jan 2010   #6
Steeevoe

Windows 7 x64
 
 

Ok, done that now


In the end after some alot of BSOD episodes this morning, I decided to go back to restore point the day before it started. Luckily there was one the day before. Now I have done a system restore and put on the drivers like before it is working fine.

Cheers
My System SpecsSystem Spec
24 Jan 2010   #7
Pauly

Win7 Ultimate X64
 
 

Glad to hear you seem to have the problem sorted

Any more probs and post again

All the best
My System SpecsSystem Spec
Reply

 Random BSOD "7f"




Thread Tools




Similar help and support threads
Thread Forum
BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"
Hi everyone! Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two...
BSOD Help and Support
Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"
My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar...
General Discussion
Random BSOD 0x00000050 "page fault in non paged area"
I've installed Windows 7 recently on a new computer and I've been getting occasional random BSODs since, always 0x00000050 page fault in non paged area, and it never mentions any file. The first few crashes were while surfing internet on Maxthon browser. I switched to Chrome since and haven't had...
BSOD Help and Support
BSOD at "random": 0x1a, 0x50, 0x3b ntoskrnl.exe+7cc80
I have been running into BSOD's on my new computer and just can't seem to figure out what the problem is. I say random in that I can't find a trigger, sometimes I can play skyrim for hours without a BSOD, other times just opening explorer results in an issue. Computer is a ASUS g74sx-dh72,...
BSOD Help and Support
Random "Bad Pool Header" and "System Service Exception" BSODs
I have been getting these "Bad Pool Header" and "System Service Exception" BSODs for about a day now (the "Bad Pool Header" one tends to pop up more often then the other btw). I ran a registry cleaner which didn't work and ran memtest this morning and it showed that my memory was fine. The BSODs...
BSOD Help and Support
BSOD Random occurrence "Page fault in non-paged area"
This occurs roughly 2 to 3 times a week.Windows 7 SP1 installed July 2011 with random occurrences soon after. Zip of documents required attached. Would appreciate any advice. Thanks,
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:07.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App