Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSoD trying to attatch Analysis


31 Jan 2010   #1

Windows 7 x64
 
 
BSoD trying to attatch Analysis

Hi, I'm coming here as a last resort. Our computer has been crashing the last week. We upgraded to windows 7 about a month ago and had no problems until recently.

My husband has updated drivers, run memtest on each stick of memory individually and together. He has run ctools in dos. He ran realtek ethernet diagnostic, nvidia diagnostics, restored the computer, and lastly he updated the bios. We thought this worked, but after more than 24 hours blue screen free it crashed today. He's also called a couple companies for the hardware listed above.

The error we most often get is page_fault_in_nonpaged_area stop:0x00000050. We have had a handful of others.

My husband is interested in the advice in bumping the voltage, but he doesn't know exactly how to try that.

I uploaded the zipped analysis here: RapidShare: 1-CLICK Web hosting - Easy Filehosting


Any suggestions on where to search next would be GREATLY appreciated.

Thanks!

Jasmin


I forgot to add that Crash Analyzer Wizard was unable to determine a likely cause.


My System SpecsSystem Spec
.

31 Jan 2010   #2

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Jake and Jasmin View Post
Hi, I'm coming here as a last resort. Our computer has been crashing the last week. We upgraded to windows 7 about a month ago and had no problems until recently.

My husband has updated drivers, run memtest on each stick of memory individually and together. He has run ctools in dos. He ran realtek ethernet diagnostic, nvidia diagnostics, restored the computer, and lastly he updated the bios. We thought this worked, but after more than 24 hours blue screen free it crashed today. He's also called a couple companies for the hardware listed above.

The error we most often get is page_fault_in_nonpaged_area stop:0x00000050. We have had a handful of others.

My husband is interested in the advice in bumping the voltage, but he doesn't know exactly how to try that.

I uploaded the zipped analysis here: RapidShare: 1-CLICK Web hosting - Easy Filehosting


Any suggestions on where to search next would be GREATLY appreciated.

Thanks!

Jasmin


I forgot to add that Crash Analyzer Wizard was unable to determine a likely cause.

Jasmin Hi and welcome

We really need the actial DMP file, not just the txt. Use these http://www.sevenforums.com/crash-loc...d-problem.html to find and upload it to us.

Thanks

Ken
My System SpecsSystem Spec
31 Jan 2010   #3

Windows 7 x64
 
 

Sorry about that. Believe it or not, I did do a search on the proper way to attach.
My System SpecsSystem Spec
.


31 Jan 2010   #4

Windows 7 x64
 
 
One more minidump

It just crashed, same message. My husband says he's going to try and remove some memory...we'll see how that goes.
My System SpecsSystem Spec
31 Jan 2010   #5

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Jake and Jasmin View Post
It just crashed, same message. My husband says he's going to try and remove some memory...we'll see how that goes.

Hi Jasmin

they both crashed because of corrupt memory management

You should download memtestx86 and run it for 5 passes

Let us know if you need help
Ken
My System SpecsSystem Spec
04 Feb 2010   #6

Windows 7 x64
 
 

OK...unfortunately I am back. We ran memtest again (we had run it before twice,) this time it came up with errors in the first pass. My husband took out two sticks of memory, and the remaining memory went through 6 passes in memtest and no errors were detected. We thought everything was OK, but Windows shut down unexpectedly again. I attached another minidump.

Also, I did run Crash Analyzer, but it said to make sure the driver at fault is up to date...but does not list the driver... so I'm confused.
My System SpecsSystem Spec
04 Feb 2010   #7

Win7 Enterprise, Win7 x86 (Ult 7600), Win7 x64 Ult 7600, TechNet RTM on AMD x64 (2.8Ghz)
 
 

How many sticks of memory? How much per each stick ? All same brand ? All same speed ?
My System SpecsSystem Spec
04 Feb 2010   #8

Windows 7 x64
 
 

Crucial balistic 800 speed, two 2gig strips in at the last crash.
My System SpecsSystem Spec
04 Feb 2010   #9

Win7 Enterprise, Win7 x86 (Ult 7600), Win7 x64 Ult 7600, TechNet RTM on AMD x64 (2.8Ghz)
 
 

I think this is a pic of your MB Do you have the memory sticks installed in the correct slots per the MB Manual ? Sometimes in the past through Trial & Error
there have been bad MB slots or bad memory sticks. We have to try to rule out each possibility.
My System SpecsSystem Spec
04 Feb 2010   #10

Windows 7 x64
 
 

Thanks... My husband is the one with the answer to that, and he's sleeping. My computer just crashed again, and this time the crash analyzer says, "the driver probably at fault is pool_corruption."

How do you "Rep" helpful members?
My System SpecsSystem Spec
Reply

 BSoD trying to attatch Analysis




Thread Tools



Similar help and support threads for2: BSoD trying to attatch Analysis
Thread Forum
BSOD Analysis Help Please! BSOD Help and Support
BSOD and Others analysis BSOD Help and Support
BSOD analysis? BSOD Help and Support
BSOD need help on analysis thank you BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:05 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33