Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD with tcpip.sys on EP45-UD3R (Rev 1.1)

06 Feb 2010   #1

Windows 7
BSOD with tcpip.sys on EP45-UD3R (Rev 1.1)

About 2 months ago I reformatted to Win 7 and ever since have been getting this problem. Somewhat frequently (2-3 times a week) my computer will BSOD with the following information

Stop: 0x000000D1
error in process: tcpip.sys

I looked into the problem and from what I could figure out from Google, I have faulty chipset drivers (my motherboard is a Gigabyte EP45-UD3R (Rev 1.1), Intel p45 Express chipset (series 4)). After reading this forum for a bit I learned that Intel is apparently not supporting Series 4 chipsets for Win7 and the only drivers Gigabyte has released for Win7 are the ones I'm using.

My question is, is there anyway to remove these BSOD's without hoping that some reliable new drivers will be eventually released? If not what reliable and safe sites should I watch for non-official drivers? The lastest .dmp file from the crash is attached.

My System SpecsSystem Spec
06 Feb 2010   #2
Microsoft MVP


Please show us the links that conclude this is a chipset driver issue.
Intel Win7 chipset drivers listed here:

The dump file (stack text) suggests that rt86win7.sys is the likely cause. This driver belongs to your Realtek network driver.

- download a new, Win7 compatible driver from Realtek: Realtek
- uninstall the currently installed Realtek driver from your system
- install the freshly downloaded driver and see if that fixes the BSOD's.

Also, please remove these older drivers that were loaded at the time of the crash. Don't use Windows Update or the Update drivers function of Device Manager.
Please use the following instructions to locate the most currently available Win7 drivers to replace the one's that you uninstall OR remove:
How To Find Drivers:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.
- some driver links are on this page:

Here's the older drivers. Please pay particular attention to any dated 2007 or earlier:
3xHybrid.sys Tue Dec 04 06:34:12 2007 -  ASUS Hybrid TV Tuner by Philips Semiconductors GmbH
COMMONFX.DLL Mon Apr 09 08:23:31 2007 - Creative Common FX Plug-in
ctaud2k.sys  Mon Apr 09 08:22:04 2007 -  Creative Audio Driver (WDM) by Creative Technology Ltd (Creative Labs Online Store)
CTAUDFX.DLL  Mon Apr 09 08:23:41 2007 -  Creative Audio Driver (WDM) by Creative Technology Ltd (Creative Labs Online Store)
ctoss2k.sys  Mon Apr 09 08:21:48 2007 - Creative OS Services Driver or Creative Audio Product by Creative Technology Ltd (Creative Labs Online Store)
ctprxy2k.sys Mon Apr 09 08:22:05 2007 - Creative Audio Driver (WDM) by Creative Technology Ltd (Creative Labs Online Store)
CTSBLFX.DLL  Mon Apr 09 08:23:53 2007 - Creative SB FX Plug-in
ctsfm2k.sys  Mon Apr 09 08:21:44 2007 - Creative SoundFont Management Device Driver or Creative Audio Product by Creative Technology Ltd (Creative Labs Online Store)
emupia2k.sys Mon Apr 09 08:21:43 2007 -  E-mu Plug-in Architecture Driver by Creative Technology Ltd (Creative Labs Online Store).
ha10kx2k.sys Mon Apr 09 08:21:50 2007 - Creative Hardware Abstract Layer Driver by Creative Technology Ltd (Creative Labs Online Store).
Summary of the BSOD:
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Debug session time: Sat Feb  6 12:49:25.638 2010 (GMT-5)
System Uptime: 0 days 16:35:06.623
BugCheck D1, {b2209000, 2, 0, 899007f8}
*** WARNING: Unable to verify timestamp for inspect.sys
*** ERROR: Module load completed but symbols could not be loaded for inspect.sys
*** WARNING: Unable to verify timestamp for Rt86win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt86win7.sys
Probably caused by : tcpip.sys ( tcpip!IN6_IS_ADDR_ISATAP+18 )
My System SpecsSystem Spec

 BSOD with tcpip.sys on EP45-UD3R (Rev 1.1)

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
M/B Gigabyte--GA-EP45-UD3P Rev 1
I want to install MS7 on new h/d.I was thinking of --- Toshiba 2TB Internal Serial ATA III Hard Drive for Desktops --.I will be getting hew desktop in 6-9 months and will use this h/d.The sepc say--2x sata 3gb/s connectors (gsata2_0,gsata2_1) supporting up to 2 sata 3gb/s devices.Would this new...
Hardware & Devices
another tcpip.sys BSOD please help !!
link of the minidump file is below. i have tried update the network driver, and the start up type to demand in device manager thanks
BSOD Help and Support
Which ram memory should I buy for my mother EX58-UD3R
Hi, I have a PC with a mother EX58-UD3R now I have installed two ram memories GSKILL RIPJAWAR DDR3 12800CL9D 4GB each. I would like to add some ram to my computer, I would like to know which is the max I can add, and if I should add identical memories as the ones I have. Thanks for your...
Hardware & Devices
BSOD's after adding RAM [ tcpip.sys ] [ error:tcpip+7a6cc ]
Bsod's started since i added a 4gb ddr3 RAM(1333MHZ ddr3 corsair single stick) to my board which already has 2 more sticks of 2gb each(1333MHZ, ddr3 , kingston) They happen every few hours... I reinstalled(removed and installed) network driver thrice.(didnt reboot the system though) I...
BSOD Help and Support
which SATA ports for GA-X58A-UD3R rev.2
I'm a newbie thru and thru, in need of advice. I have a GA-X58A-UD3R Rev.2 w/i7/12gb RAM and the following drives- 120gb Vertex2 SSD (w/w7-64bit) 2-600gb DigiRaptors as RAID1 SATA DVD I originally plugged the SSD and DVD into GSATA2 and the RAID1 drives to GSATA3. I had BSOD once a week til I...
Hardware & Devices
Is the Gigabyte EX58-UD3R motherboard compatible...
Is the Gigabyte EX58-UD3R motherboard compatible with i7 Duo Core Processor? Here is the link below about the motherboard i am planning to buy for custom pc. GA-EX58-UD3R (rev. 1.0) - GIGABYTE - Product - Motherboard - Overview If it is NOT compatible with dual core processor, is having a...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:44.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App