Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Random BSOD and Random Resets

24 Feb 2010   #11

Windows 7 Utimate 64bit edition

On Thu 2/25/2010 4:25:09 AM your computer crashed
This was likely caused by the following module: ntoskrnl.exe
Bugcheck code: 0xA (0x325700520050, 0x2, 0x0, 0xFFFFF80002C9AA83)
Dump file: C:\Windows\Minidump\022410-21980-01.dmp
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit may be another driver on your system which cannot be identified at this time.

If you played with your ram setting reset them to stock and reset... gigaybyte and their motherboards don't like high ram settings as of yet.

Try resetting your ram as well, this might be the issue. move the dimms around.

Also update your bois

Then run off windows disk and repair your windows... might be boot file missing.

I would also run a sfc /scanow

My System SpecsSystem Spec
25 Feb 2010   #12
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit

Quote   Quote: Originally Posted by Tinks View Post
Ok ran the verifier again and this time I know I got it for sure. Not sure what happened with the last.
Did the verifier, restarted and it crashed pretty instantly while starting up and gave me the BSOD. Collected the data. Had to do a system restore to make it back onto the computer because it needed repairs.

Here is the minidump

Hopefully this will solve the mystery
Hello Tinks,

I looked into the Dump file its pointing to CI.dll (Code Integrity) which is a core Windows component.

Code Integrity (CI) protects Windows Vista / 7 by verifying that system binaries haven’t been tampered with by malicious code and by ensuring that there are no unsigned drivers running in kernel mode on the system. CI starts as Windows starts up. The boot loader checks the integrity of the kernel, the Hardware Abstraction Layer (HAL), and the boot-start drivers. After these binaries have been verified, the system starts and the memory manager calls CI to verify any binaries that are loaded into the kernel’s memory space. The binaries are verified by looking up their signatures in the system catalogs. Aside from the kernel memory space, CI verifies binaries loaded into a protected process and system installed dynamic libraries that implement core cryptographic functions. (Info by Ed Bott)

What virus protection are you using ?? Because i did a search on this some of them showed up as if it might be an infection. These what you can try.

Post us back the results

Good Luck,
My System SpecsSystem Spec
26 Feb 2010   #13

Windows 7 64-Bit

I already ran sfc/ scannow, no errors

My ram should be at stock settings as I haven't fiddled with them at all. (I will give the dimms a go but I need instruction on that, not sure where to go)

I'm not really certain what to download as far as updates for this on 64bit?
GA-EP45-UD3P (rev. 1.1) - GIGABYTE - Support&Download - Motherboard - BIOS

I ran Malware and it did find malicious files. Apparently my gf downloaded WYEKE. Malware isolated the files and deleted them. I also physically deleted some related folders.
I can't get Malware to perform a full system scan though and finish without it freezing/crashing. I don't know what would cause this.
(edit)Finally got the full system scan to work. No more malicious files are on the comp.

Selective Startup doesn't seem to be working? I'll keep trying

HD Diagnostic says my HD is completely fine, no errors.

Ran CCleaner.

I'm still getting bsod's after all of this.

Here is another minidump in case this one is different.
My System SpecsSystem Spec

27 Feb 2010   #14

Windows 7 64-Bit

More recent:
My System SpecsSystem Spec
28 Feb 2010   #15

Windows 7 64-Bit

I turned all my selective startup items off and I'm still crashing.

I'm running a benchmark game (Shattered Horizon) and it can't even run the game.
I even put in a Geforce GTS 250 instead of my Geforce GTX 275 and I still had problems.

I've scanned each part, ram, harddrive, software(malware, avg, spybot, ccleaner etc). Tested with different cards, even with a stock PCI card it crashed at a tech place.
I've updated everything I can for my mobo, chipset and so on

I'm left feeling like it's compatibility issues with all of my parts and I need advice on how to check which part isn't compatible with which so I can replace it. Are there any programs I can use or is there anyone here that can look at the parts I have and tell me what the issue might be?
Thank you guys for all the help you've given so far, it's been incredibly useful to narrow this down so far.
My System SpecsSystem Spec

 Random BSOD and Random Resets

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Random BSOD problems in the past 2 days. Random errors at random times
Three days ago my water cooling failed (got up to 77C while gaming is when I noticed the problem as my CPU should not go over 62C). I decided to install an aftermarket heatsink instead of a new water cooling system ,and add a few more fans just to make sure my whole motherboard was getting plenty...
BSOD Help and Support
Random blue screens, resets on a new PC
Hello, I bought a new PC and already having lots of issues. After installing Windows 7 Ultimate x64 with SP1, I installed Motherboard drivers and could no longer open My Computer > Properties. I fixed that using SFC in cmd which found some corrupted Windows files. I also installed GPU drivers. ...
BSOD Help and Support
Random BSOD with random error code at random moment
Hello Ok now i'm out of solution so i come here hoping that someone could help me I always had bsod hapening randomly but not like the this week I got 2 bsod/day when i'm playing, when i'm staring at my monitor or even when i'm sleeping with random error code like 0x1e, 0x24, 0x3b, 0x4a or 0xa...
BSOD Help and Support
Random resets Windows 7
Greetings and congratulations for the good job in the Forums. My PC is having random resets for quite a while now. No specific trigger, no pattern, except that it mostly happens when systems is on light load or even idle. Sometimes it happened once in a week and sometimes 3-4 times in a day. I...
BSOD Help and Support
'Random' BSOD, Freezes and resets. Suddenly started.
System: 64-bit Athlon processor 1GB of DDR400 RAM x2 Graphics card: NVidia of some type. PSU: 500W Windows 7 and Windows XP on different partitions. ----
BSOD Help and Support
BSOD and Random Resets
Hey all, new to forums :) Just went and bought myself a brand new PC, installed Windows 7 Professional, 64 bit. After a few hardware issues (now resolved with the store I bought them from), the computer seemed to be running fine. I then installed steam, and after updating I immediately got a...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 09:22.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App