Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: I think i have a RAM error

19 Mar 2010   #21

Windows 7 x64

Graphics Card HIS ati radeon HD 4870 1gb DDR5

What PSU exactly do you have ? How much Watts and ampere can it deliver ?

Also, always try to clean your PSU 1 time a month to make sure it does not overheat, along with your system of course. Ventilation is really important and cable management inside your case make sometimes make drop your idle temps by some degrees, wich is always a must.

My System SpecsSystem Spec
20 Mar 2010   #22

Vista Ultimate 32bit

Hi, My power supply says Earthwatts, model EA-500D, 500W Max, and in the table that measures DC output at +5V max is 24A and min is 0.3A. I also wanted to mention that I have been approved an RMA at corsair, But should i go through with it? i have heard bad reports from people who have done it, and maybe the RAM isn't the prob, memtest hasn't shown any errors etc. Also im an aussie so the shipping would cost a bit and it may take ages for them to get the Ram back to me.
My System SpecsSystem Spec
21 Mar 2010   #23

Vista Ultimate 32bit

Hi i just got another blue screen crash and i think it is a new one - Driver irql is not less or equal- i have attached the dump file to see if anyone could help
My System SpecsSystem Spec

21 Mar 2010   #24

Win 8 Release candidate 8400

Quote   Quote: Originally Posted by tehshredder View Post
Hi i just got another blue screen crash and i think it is a new one - Driver irql is not less or equal- i have attached the dump file to see if anyone could help


Unfortunately we dont have the symbols for vista. I can only guess at the cause and I believe it to be tcpip.sys

I would run a system file check
to verify and repair your system files

type cmd in search>right click and run as admin>sfc /scannow (note the space between sfc and "/")

Let us know if you need help

My System SpecsSystem Spec
21 Mar 2010   #25

Vista Ultimate 32bit

I just did the sfc and no errors were found. Should i just reformat the hd and install windows 7 instead of vista? and if it still gets errors than its definitly hardware and then i can do the RMA with corsire - im sick of vista
My System SpecsSystem Spec

 I think i have a RAM error

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Burnt out from error error error! Time to go back to Paper.
Hello there. I have been redirected here by jamanji, whom has been most helpful by the way. My PC crashed a little over a week ago. Rather than retype everything, I would like to give you the link to my post. I am not 'Tech' per se, but I would like to try and resolve my problem myself, To...
System Security
Error 41, Error 1001 and error 6008.
Hello there. Recently my computer have just randomly shutdown meanwhile i'm playing games like CS;GO, League of Legends. The screen will just turn black and it will start to make one hell of annoying noise untill it reboots. I've updated all my drivers. Tested my memory. Tested my RAM. Run a...
BSOD Help and Support
Error copying file: Data error (cyclic redundancy check). CRC Scan ?
Edit: Think my hard drive may be failing and was the cause of my file synchronizing crash. I use it mostly to stream music and video and access the hard drive a lot. Any advice thanks HDDStatus - Tool to check hard disk status, health and reliability Hey, I've been using GoodSync for the...
Backup and Restore
BSOD by ntoskrnl.exe, error d1, error 3b, error 1a
I've just install windows 7 home premium 64bit and got 4 times of BSOD. for the first time error code is 0x0000001a for the 2nd time error code is 0x0000003b for the 3rd time error code is 0x0000003b for the 4th time error code is 0x000000d1 I also attach minidump files and text files that...
BSOD Help and Support
Scan Error Error while Scan::0::LEAD Error: Twain source manager no
hi.... i have promblme , i do not know how to fix it.. i have kodak scnners i1220 plus i have RD Web Access the promblme is.. I have a system based on Oracle has been connted with one scanners( i connected with scanners) When i do a scan shows me this a message (Scan Error Error while...
Hardware & Devices
BSOD error.. Restarts, but power button stays on, graphics card error?
Hey guys, i want to thank you ahead of time for helping me. This BSOD is a pain in the butt. Intel Pentium 2.8GHZ RAM 3.5 32 bit OS Intel GG965 Express Chipset Family I have already reinstalled the operating system multiple times, i think its a faulty graphics card, but i want to be...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 03:50.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App