New
#31
dmcouch did you have probs when the ram voltage was set to auto?
I fail the INTEL test and my temp are in the high 50 and like 60, 61
right dmcouch, lets get radical strip the pc down to the bare essentials just 1 stick of ram ,keyboard,mouse and graphics card and see what results you get try both sticks of ram seperately then we will take it from there :)
Intel Burn test version 2.4 Passed with 1 stick of ram going to try now the other two sticks that were not in computer since I know the one I pulled out was bad.
Looks like you are approaching it systematically - very good.
I must have a bad mother board cause the other 2 sticks say they are bad too that is not possible to have 3 bad stick of RAM is it
I am still getting errors with just one stick here is the latest dump file
I know its pain in the A$$ but if I was you I’d bench build to get to the end of this…
Pull everything out of the case. On a workbench/table hook up MB, PS, Memory (1 stick only), Video card, and a Optical drive…
Boot to a memetest CD and test, go for 5 successful passes and then retest with a different memstick. Then test stick #3 the same way.
The odds that 3 sticks of Corsair being bad is extremely unlikely. If all three fail, I’d replace the board…
Last edited by win7clutz; 13 Mar 2010 at 23:28. Reason: typo
ALL I HAVE hooked up to computer now is motherboard video card 1 samsung DVD-R, Keyboard and mouse and Hard drive that is it nothing else and no extra programs except AVG 9.0 Internet security and 1 stick of RAM. If I put anymore memory in there the computer will now boot up.