Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD Win7 64bit


22 Mar 2010   #1

Wndows 7 Ultimate 64bit
 
 
Random BSOD Win7 64bit

Hi,

I keep getting random BSOD. Memory dump below. Unfortunately I don't know hoe to interpret it. I see the file below says Vista driver fault but I have ensured all drivers are Win 7 64 bit. Unless someone can say otherwise. Can anyone please help?

Thanks in advance! Dave

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
PROCESS1_INITIALIZATION_FAILED (6b)
Arguments:
Arg1: 0000000000000000, Indicates the NT status code that caused the failure.
Arg2: 0000000000000000, (reserved)
Arg3: 0000000000000000
Arg4: 0000000000000000
Debugging Details:
------------------

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x6B
PROCESS_NAME: System
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff80003209bc1 to fffff80002cd8ed0
STACK_TEXT:
fffff880`009a9b38 fffff800`03209bc1 : 00000000`00000000 00000000`00000000 fffff800`00812660 fffff800`00812660 : nt!KeBugCheck
fffff880`009a9b40 fffff800`0315a419 : 48186889`48105889 fffffa80`039d7040 00000000`00000080 fffffa80`03974b30 : nt!Phase1InitializationDiscard+0x1331
fffff880`009a9d10 fffff800`02f7c166 : f0015e8d`45000002 00000000`00000080 beffffff`b5158d48 fffff800`02cb7479 : nt!Phase1Initialization+0x9
fffff880`009a9d40 fffff800`02cb7486 : fffff800`02e51e80 fffffa80`039d7040 fffff800`02e5fc40 30245c89`48382444 : nt!PspSystemThreadStartup+0x5a
fffff880`009a9d80 00000000`00000000 : fffff880`009aa000 fffff880`009a4000 fffff880`009a82b0 00000000`00000000 : nt!KxStartSystemThread+0x16

STACK_COMMAND: kb
FOLLOWUP_IP:
nt!Phase1InitializationDiscard+1331
fffff800`03209bc1 cc int 3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt!Phase1InitializationDiscard+1331
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bc600
FAILURE_BUCKET_ID: X64_0x6B_nt!Phase1InitializationDiscard+1331
BUCKET_ID: X64_0x6B_nt!Phase1InitializationDiscard+1331
Followup: MachineOwner
---------

My System SpecsSystem Spec
.

22 Mar 2010   #2

64-bit Windows 8.1 Pro
 
 

My System SpecsSystem Spec
22 Mar 2010   #3

Wndows 7 Ultimate 64bit
 
 

Sorry Tews,

Anyway attached is what you asked for. Thanks, Dave
My System SpecsSystem Spec
.


22 Mar 2010   #4

64-bit Windows 8.1 Pro
 
 

Your .dmp file shows a PROCESS1_INITIALIZATION_FAILED .. This error can be caused by any part of the disk subsystem, including bad disks, bad or incorrect cables, mixing different ATA-type devices on the same chain, or drives that are not available due to hardware regeneration. It can also be caused by a missing file from the boot partition, or by a driver file that has been disabled from the Drivers tab by mistake.

Check your cables for your hard drive. If you can boot into safe mode, run chkdisk /f/r as well as sfc /scannow just to be safe.. How old is your drive...this could be caused by a faulty/dying drive.. Hope this helps..
My System SpecsSystem Spec
22 Mar 2010   #5

Wndows 7 Ultimate 64bit
 
 

I will do all the checks you have mentioned. My disks are both SATA ands on differing leads and MOBO ports. However, the main 600GB C: is a few years old now. Thanks for the help. I'll let you know how I get on after running your tests above.
My System SpecsSystem Spec
24 Mar 2010   #6

Wndows 7 Ultimate 64bit
 
 

All sorted. Thank you very much. Check disk came up with nothing but sfc /scannow revealed numerous errors it tried to fix. I ran this 4 or 5 times but system still couldn't fix them. I backed up my drive, installed a new 1Tb drive last night, restored the C drive and all checks out OK. I have scanned the old drive in an external caddy and it has numerous bad sectors. Thanks again for all your help. Spot on service.
My System SpecsSystem Spec
Reply

 Random BSOD Win7 64bit




Thread Tools



Similar help and support threads for2: Random BSOD Win7 64bit
Thread Forum
BSOD Winxp 64bit, Win7 Pro 64bit many error codes BSOD Help and Support
Solved random BSOD clean win7 64bit install, need your help guys BSOD Help and Support
Win7 64bit random bsod BSOD Help and Support
Help with random freeze on my win7 64bit BSOD Help and Support
Random 64bit Win7 bluescreens BSOD Help and Support
Random Lock up Win7 64bit BSOD Help and Support
Random BSOD Win7 64bit BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:51 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33