Keep getting BSOD, when laptop shutsdown or hibernates?


  1. Posts : 1
    Windows 7
       #1

    Keep getting BSOD, when laptop shutsdown or hibernates?


    Hello,

    I recently had to reinstall Windows 7 and I did so after completely reformatting my hard drive. It was a clean install, with no other startup HP software. However, now sometimes my computer will crash when I close the laptop, or if it runs out of battery and trys to hibernate. I have been reading other posts, and it seems that hardware drivers tend to create these problems. When I reinstalled, I thought I updated all of the drivers to the most recent driver, but I could be wrong. Can anyone please help me with this? It woudl be most appreciated I have attached to the two files.

    Best Regards,

    Dustin

    Also here is windows information:

    Problem signature:
    Problem Event Name: BlueScreen
    OS Version: 6.1.7600.2.0.0.768.3
    Locale ID: 1033
    Additional information about the problem:
    BCCode: 9f
    BCP1: 00000003
    BCP2: 85EA0B60
    BCP3: 82B32AE0
    BCP4: 854FBCD8
    OS Version: 6_1_7600
    Service Pack: 0_0
    Product: 768_1
    Files that help describe the problem:
    C:\Windows\Minidump\032210-19858-01.dmp
    C:\Users\Dustin John Semach\AppData\Local\Temp\WER-31683-0.sysdata.xml
    Read our privacy statement online:
    Windows 7 Privacy Statement - Microsoft Windows
    If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt
      My Computer


  2. Posts : 28,845
    Win 8 Release candidate 8400
       #2

    Tasemach said:
    Hello,

    I recently had to reinstall Windows 7 and I did so after completely reformatting my hard drive. It was a clean install, with no other startup HP software. However, now sometimes my computer will crash when I close the laptop, or if it runs out of battery and trys to hibernate. I have been reading other posts, and it seems that hardware drivers tend to create these problems. When I reinstalled, I thought I updated all of the drivers to the most recent driver, but I could be wrong. Can anyone please help me with this? It woudl be most appreciated I have attached to the two files.

    Best Regards,

    Dustin

    Also here is windows information:

    Problem signature:
    Problem Event Name: BlueScreen
    OS Version: 6.1.7600.2.0.0.768.3
    Locale ID: 1033
    Additional information about the problem:
    BCCode: 9f
    BCP1: 00000003
    BCP2: 85EA0B60
    BCP3: 82B32AE0
    BCP4: 854FBCD8
    OS Version: 6_1_7600
    Service Pack: 0_0
    Product: 768_1
    Files that help describe the problem:
    C:\Windows\Minidump\032210-19858-01.dmp
    C:\Users\Dustin John Semach\AppData\Local\Temp\WER-31683-0.sysdata.xml
    Read our privacy statement online:
    Windows 7 Privacy Statement - Microsoft Windows
    If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt
    Dustin;


    The Windows Debugging Tools aren't able to access symbols for your operating system files (in particular NTOSKRNL.EXE / NTKRNLMP.EXE / NTKRNLPA.EXE / NTKRPAMP.EXE) from the Microsoft Symbol Server - so that makes debugging them difficult if not impossible.

    Please do the following:
    - activate/validate the Windows installation at Genuine Microsoft Software
    - run sfc.exe /scannow to replace any problem files
    - open a support incident with Microsoft to see if they can fix the missing symbols issue ( Windows 7 Solution Center )
    - If that doesn't fix it, then wipe the hard drive and reinstall Windows
    - don't use "leaked"/torrent builds

    Let me know if you need help with any of this

    Ken



    Code:
    Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
    Copyright (c) Microsoft Corporation. All rights reserved.
    
    
    Loading Dump File [C:\Users\K\Desktop\032210-19858-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available
    
    DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?ffffffff`82b32ad4?
    Symbol search path is: SRV*F:\symbols*http://msdl.microsoft.com/download/symbols
    Executable search path is: 
    Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntkrnlpa.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
    Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
    Product: WinNt, suite: TerminalServer SingleUserTS Personal
    Built by: 7600.16481.x86fre.win7_gdr.091207-1941
    Machine Name:
    Kernel base = 0x82a0c000 PsLoadedModuleList = 0x82b54810
    Debug session time: Mon Mar 22 01:13:23.707 2010 (GMT-4)
    System Uptime: 0 days 5:00:08.455
    Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntkrnlpa.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
    Loading Kernel Symbols
    ...............................................................
    ................................................................
    ..................................
    Loading User Symbols
    Loading unloaded module list
    .........
    0: kd> !analyze -v
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    DRIVER_POWER_STATE_FAILURE (9f)
    A driver is causing an inconsistent power state.
    Arguments:
    Arg1: 00000003, A device object has been blocking an Irp for too long a time
    Arg2: 85ea0b60, Physical Device Object of the stack
    Arg3: 82b32ae0, Functional Device Object of the stack
    Arg4: 854fbcd8, The blocked IRP
    
    Debugging Details:
    ------------------
    
    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.
    
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_IRP                                       ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_IRP                                       ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!KPRCB                                      ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!KPRCB                                      ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_IRP                                       ***
    ***                                                                   ***
    *************************************************************************
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 03:25.
Find Us