Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD - Minidump help needed.

28 Mar 2010   #1
Joq

Windows 7 - 64bit
 
 
BSOD - Minidump help needed.

Hello, i've been having trouble with my Windows 7 - 64bit. It keeps giving me BSOD and Windbg says:

BugCheck 1A, {41790, fffffa8004818cf0, ffff, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+339d6 )

I've included the minidump here, any help would be appreciated.
I also have Windows XP 32bit on another HDD which is working fine with the same setup.
______________________________________________________________
Intel Core i5 - 750
Asus P7P55D-E (0711 - BIOS)
4 x 2gb DDR3 1333MHz (PC3-10660) CL7
______________________________________________________________

Another thing, in CPU-Z it says my RAM is:
DRAM Frequency: 666 MHz
FSB:DRAM 2:10
CAS# Latency (CL) 9.0 clocks
RAS# to CAS# Delay (tRCD) 9 clocks
RAS# Precharge (trp) 9 clocks
Cycle Time (tRAS) 24 clocks
Row Refresh Cycle Time (tRFC) 74 clocks
Command Rate (CR) 2T

Thing is i have RAM which is supposed to be:
Extreeme Dark Tri-Channel kit, DDR3 1333MHz (PC3-10660) CL7
CAS-latency: 7-7-7-21

Might this have something to do with the "MEMORY_MANAGEMENT" BSOD?
______________________________________________________________

My System SpecsSystem Spec
.

28 Mar 2010   #2

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Joq View Post
Hello, i've been having trouble with my Windows 7 - 64bit. It keeps giving me BSOD and Windbg says:

BugCheck 1A, {41790, fffffa8004818cf0, ffff, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+339d6 )

I've included the minidump here, any help would be appreciated.
I also have Windows XP 32bit on another HDD which is working fine with the same setup.
______________________________________________________________
Intel Core i5 - 750
Asus P7P55D-E (0711 - BIOS)
4 x 2gb DDR3 1333MHz (PC3-10660) CL7
______________________________________________________________

Another thing, in CPU-Z it says my RAM is:
DRAM Frequency: 666 MHz
FSBRAM 2:10
CAS# Latency (CL) 9.0 clocks
RAS# to CAS# Delay (tRCD) 9 clocks
RAS# Precharge (trp) 9 clocks
Cycle Time (tRAS) 24 clocks
Row Refresh Cycle Time (tRFC) 74 clocks
Command Rate (CR) 2T

Thing is i have RAM which is supposed to be:
Extreeme Dark Tri-Channel kit, DDR3 1333MHz (PC3-10660) CL7
CAS-latency: 7-7-7-21

Might this have something to do with the "MEMORY_MANAGEMENT" BSOD?
______________________________________________________________
It does. memory management. I would download memtestx86 and run it for 5 passes.

Let us know the results

Ken
My System SpecsSystem Spec
28 Mar 2010   #3
Joq

Windows 7 - 64bit
 
 

Should i go to BIOS and set the RAM - CAS values manually?
My System SpecsSystem Spec
.


28 Mar 2010   #4

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Joq View Post
Should i go to BIOS and set the RAM - CAS values manually?
Did you run memtest?

I would not adjust anything in bios until memtest is run


Ken
My System SpecsSystem Spec
28 Mar 2010   #5
Joq

Windows 7 - 64bit
 
 

I ran the memtest86+ v.4.00, for just a little over one pass. If i read the thing correctly it gave me like over 3 million errors. It doesn't seem to give any clear error raporting atleast one that i'm used to looking at.

Anyways, it also showed that my RAM was CL 9-9-9-24 or something.
I'm baffled, since everything is working fine on my Windows XP 32-bit.
My System SpecsSystem Spec
28 Mar 2010   #6

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Joq View Post
I ran the memtest86+ v.4.00, for just a little over one pass. If i read the thing correctly it gave me like over 3 million errors. It doesn't seem to give any clear error raporting atleast one that i'm used to looking at.

Anyways, it also showed that my RAM was CL 9-9-9-24 or something.
I'm baffled, since everything is working fine on my Windows XP 32-bit.

If memtest is giving you errors then before you can stabilize the machine you have to do something about the ram. I cant tell you if it is CL9 or something else. I would doubt the ram is good. Try testing it one stick at a time maybe you can isolate which it is.

Ken
My System SpecsSystem Spec
28 Mar 2010   #7
Joq

Windows 7 - 64bit
 
 

I googled around and found this Diagnose with Memtest86+ Icrontic Tech
It said "If you are overclocking then too high FSB settings can generate memory errors as can under-volting RAM. Try backing down your OC or bumping the voltage to your RAM to see if that clears up the error."

I think i have everything in BIOS set on Auto, might it be under-volting my RAM?
My System SpecsSystem Spec
28 Mar 2010   #8

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Joq View Post
I googled around and found this Diagnose with Memtest86+ Icrontic Tech
It said "If you are overclocking then too high FSB settings can generate memory errors as can under-volting RAM. Try backing down your OC or bumping the voltage to your RAM to see if that clears up the error."

I think i have everything in BIOS set on Auto, might it be under-volting my RAM?

I am clueless about either. I would make sure everything is stock beyond that I would be concerned.

Ken
My System SpecsSystem Spec
29 Mar 2010   #9
Joq

Windows 7 - 64bit
 
 

Ok, memtest86+ test results.
  • Each of the four RAM sticks have cleared 3 passes without any errors on Dimm slot B1.
  • When i tried one RAM stick on the Dimm slot A1 it gave me errors.
  • I tried one RAM stick on Dimm slot A1 and one on B1 as the manual says to run with two RAM sticks to have dual-channel, memtest86+ gave me errors.
  • Then i inserted the last two RAM sticks on Dimm slots A2 and B2 now having all Dimm slots occupied, i got errors.

Am i to assume now that each RAM sticks are ok and the problem infact is the motherboard Dimm slots?
My System SpecsSystem Spec
01 Apr 2010   #10
Joq

Windows 7 - 64bit
 
 

Anyone please?
My System SpecsSystem Spec
Reply

 BSOD - Minidump help needed.




Thread Tools



Similar help and support threads for2: BSOD - Minidump help needed.
Thread Forum
BSOD NO minidump... BSOD Help and Support
Bluescreen crash (Minidump) help needed BSOD Help and Support
Minidump crash report: translation needed. BSOD Help and Support
In big need of BSOD minidump help! BSOD Help and Support
Need help with BSoD (minidump) BSOD Help and Support
BSOD Minidump Help BSOD Help and Support
another BSOD need help with minidump BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:35 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33