New
#1
BSOD. Typicaly the day after a fresh install.
I have bought a new HD, motherboard, cpu, and ram for my old case. After I put all the parts together I did transfer about 60 GB between the two old hard drives (which did heat them up signifigantly). One of the old hard drives has the windows xp I was trying to use to debug if it was a software problem. And the other old HD is needed to boot my upgrade licence version of windows 7 but the system files are on the new 500 GB HD.
I have reinstalled windows 7 64-bit a few times. I have even tried running a previous version of XP. Both seem to have worked fine but seem to have been steadly becoming unstable over time. But both installs where on separate hard drives so a single hard drive problem would not be the case.
With XP the symtoms where that the web browsers would have serious difficulty loading a page. The errors from the browsers being can not find website to the page not fully loading.
With Windows 7 the symtoms where BSOD that tended to occur the day after the fresh install. System restores via install disc seem to patch the problem for a while. Of course since I install the drivers for the mobo the first day every time I tried I can't rule out that the motherboard install cd could be faulty. My internet connection is thru linksys wusb54g v4 wireless adapter which did download a corrupted steam file (Forgot if windows 7 or xp error) (have not tested if it is a problem yet or if it was only an isolated insident).
Just today I tryed running the pc with the case open inorder to rule out insufficient cooling of the motherboard (I was worried since the heat sink for mobo had no fan and was blocked from air flow from one side by the graphics card that cooling maybe an issue). But that test failed dispite lowering the case temp a few degrees fahrenheit.
Attached is my only dmp file so far for this fresh install (windows 7). And I have some text below.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional information about the problem:
BCCode: 24
BCP1: 00000000001904FB
BCP2: FFFFF880044ED798
BCP3: FFFFF880044ED000
BCP4: FFFFF88001103A91
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\051110-19468-01.dmp
C:\Users\Eric\AppData\Local\Temp\WER-32526-0.sysdata.xml
I appreciate any thing you can do for me.
I have run memtest86 from cd at boot to test the ram I only came across an error in the very first time running the test but that might have been me messing around with settings. It also caused an error message to be printed out on test results area. But all tests after are fine adding the suspicion of only one core being faulty as one of many of my paranoid explanations of my system problems.
I am happly well within warranty and I bought all my new parts from newegg.
I am sorry for rambling on I will try to be more helpful with straightforward answers to your questions to assist me.
And again I am grateful for your help.